1. you MUST include a description and price of the item.
EX: 1992 3000GT front bumper
blue, some scratches, fully intact.
200 OBO

2. do NOT place the same item for sale 2 times. its clutters the board.

3. NO SPAMMING! no "nokia phone 50 DOLLARS!" type adds. they will be deleted and you will be removed from the board.

4. please keep all addresses, credit card transactions, telephone numbers, and anything of that nature to PM's.

5. all older (around 5-6 months old) items will be deleted. you can always go in and bump your item if it is still for sale.

6. PM me after the item you have listed has sold. this helps me from going threw EVERY SINGLE ITEM and seeing if its sold or not. also helps YOU from getting pestered about something already sold.

the next things i list are guidelines and strongly encouraged.

pictures always help, they will limit the "got any pics bro" posts that always apear.
for pics used it would be wise to not have you face in them, as well as any identifying items (IE liscence plates, houses)
don't give out personal information unless you have to (IE phone number for a call, address for shipping)

and mitsubishi-forums are not responsable FOR ANY problems you may encounter durring transactions, although reporting them will get the offending party repromended or banned.

http://muskegon.craigslist.org/ele/1451646193.html


Complete carputer setup. taking Bestoffer please EMAIL me with any questions

(6) Fully refurbished, ready to install fuel injectors. Fits 1st generation 3000gt/Stealth SOHC or 1990-1992:Mitsubishi Galant Base; 4 Cyl 2.0L; "GAS, FI, VIN V" 1990-1992: Mitsubishi Galant LS; 4 Cyl 2.0L; "GAS, FI, VIN V"

See ebay auction here.

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...5#ht_500wt_1182

hey i need a short shifter like it says please help i live in california!

I take no credit in creating the circuitry and solution of eliminating the Daytime Running Lights in our 08/09 Lancers. I simply follow this How-To, created and submitted by afeudale, and provide you with the completed product. I build the circuit shown and construct it WITHIN a Relay Harness--This includes parts/time/labor/etc.

**Any type of electrical wiring is dangerous and can be harmful to you and your car if not installed with the proper care. When purchasing this DRL Bypass w/ Relay Harness, you assume full responsibility and potential risks in running this completed product.

***This DRL Bypass w/ Relay Harness has also been tested & confirmed to work 100% with OEM STOCK lights.

The DRL Bypass will simply eliminate the DRL's. Therefore, no flickering is present when running HID's. The DRL Bypass w/ Relay Harness is completely Plug & Play and requires no splicing whatsoever with the OEM wiring, thus saving you from any warranty issues and/or headaches. With the bypass properly installed, all lights will assume normal function:

Position 0 - All lights OFF, DRL's OFF
Position 1 - Parking lights ON, DRL's OFF
Position 2 - Low beams ON, Parking lights ON


Here's a video to show the function of the DRL Bypasses that I provide:


DRL Bypass w/ Relay Harness:





*Price:
$55 local meet up
$60 shipped
*Price includes shipping expenses + paypal fees (2.9% + $0.30)


*Payment:
Paypal (preferred), Money order, or Cash.

*Shipping:
I ship your DRL Bypass w/ Relay Harness via USPS First Class Mail. At your convenience, I also include tracking & confirmation.

*Returns:
Void after 2 weeks from purchase.
Void if the DRL bypass is tampered in anyway. I will know, I made it.
Valid only for defected/faulty products.
Will only offer a full refund if the DRL Bypass is confirmed (by ME) to be defective.


Installation Instructions: CLICK

I have been running this setup DRL Bypass w/ Relay Harness since March 12, 2009, with no issues/problems. I have also sold multiple sets on Project Lancer and EvolutionM where members can vouch for me and the completed product.

I am currently in the process of making about 10 sets. If you are interested and/or have questions, please feel free to send me a PM.

Thank you for your interest!

hey guys, im selling a RRM timing control box for the 2008 lancer. idk if it will fit the 2009, u will have to ask RRM. Upon request i will post a picture with my SN on it. i am asking 175 but you can always make me an offer, thanks!

I have both driver and passenger fenders for sale from my 2008 Lancer Evo MR.....great shape...message me. SOLD SOLD...thanks

hi,i have for sale mitsubishi genuine workshop manuals for sale part 1 and 2 for the gto,these are proper books not cds,£70.00,also workshop manuals covering mk1 and 2 £70.brand new rear discs 297mm,£50.00,grooved front discs used but still good 313mm £40.00.two uk speedos 1 showing about 45000 miles,£50,1 showing 212000 miles £40.you can email me at jtharri44@yahoo.co.uk.cheers john.

Selling the rad support from my 2008 Lancer Evo MR...pristine condition...message me.

2008 Lancer Evo MR.....radiator with electric fans and rad cap. Motor only has 2800 km on it.

Selling both driver and passenger doors from my 2008 Lancer Evo MR.... great condition....please message me.

I have the complete fog light assembly from my car. Almost brand new...message me.

These are off my 2008 Lancer Evo MR...complete assembly. Only 2800 km on car. Message me for more info.

Complete front bumper for the 2008 Lancer Evo MR up for grabs. Great condition...message me

I took off the rotors and Brembo calipers from my 2008 Lancer Evolution MR...only 1700 miles on them... anyone interested let me know.

I also have the rears but no pics of them yet.

Hey...took off the springs and shocks. I have them all. Need to get rid of...2008 Lancer Evo MR.... 1700 miles on them only....great condition. More pics to follow.

Picture of the rebar front bumper from my 2008 Lancer Evo Mr...any interest let me know...

2008 Lancer Evo MR....intercooler and turbo lines up for sale...1700 miles only on the car...message me..

I have the inner door skins on both the front and rears doors for sale from my 2008 Lancer Evo MR....only 1700 miles on the car...need to sell asap.

NICE and CLEAN daily driver needs work. $2700 OBO...Moving soon and prefer to sell car instead of towing. Needs timing belt, water pump and probably new pistons/valve work.

-White on tan leather (good condition with normal wear on driver seat bolster)
-Sunroof
-Automatic
-Decent gas mileage in sporty car
-160K miles (all stock and never raced)

Some photos here. Additional photos available upon request. http://norfolk.craigslist.org/cto/1413439354.html

Dsm parts
3in gm maf w translator $175
Data logger cord with palm 3 xe $125 software already loaded
2g turbo manifold $50
1g and 2g turbo o2 housing from turbo $ 25 each
Stock tail lights $20
Alternator gsx
Starter
Coil stock 2g

Ok so it is a wrecked 2gb 1997 Eclipse

420A motor(rebuilt 15k miles ago: oil pump, water pump, pistons, rings, main bearings, rods bearings, timing belt and components, all gaskets replaced, valve and head job, block was honed and cleaned, freeze out plugs replaced, crank was polished) $600(willing to ship)

Side Skirts $80

Rear Bumper $50

3 Piece spoiler $40

AEM V2 Cold Air intake(no filter, some bends but straintened out) $80

Tail lights $30

Reverse light $15

Fog lights $50

Any interior piece you can ask for.
Just email me or pm me for questions and photos.
I can have you just about any piece you need minus hood, front bumper, and fenders.

cdrumm205@yahoo.com
All prices slightly negotiable

I have a '96 GS that I am parting out. I dont want to make a long list or post a bunch of pics just send me a message with what parts you want and where you live so I can calculate a shipping cost and send pics to you if you request them. The hood and headlights are already spoken for pretty much everything else is there, I am parting it out due to a bad crankshaft. I dont have any performance parts or anything aftermarket except some altezza tails.

Josh

email: courtney_dillenbeck@yahoo.com

I have an unpainted Aerogear AeroExtreme Body Kit (Front Bumper, Sidekirts, Rear Bumper, etc) for a Mitsubishi Eclipse (1995-1999)....I paid over 900 dollars (with receipt)a few years ago for this and I no longer have the car and this kit never got a chance to be mounted....I am looking to get somewhere around 500 for it. Thanks for checking out this post!

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...K%3AMESELX%3AIT

If it doesnt sell, you can shoot me an offer and ill relist it!!

hi im selling my 1995 talon tsi.it is awd (all wheel drive) and five(5) speed manual.(car is the same as a eclipse gsx)car has 121k orig. on odometer so is on body. motor and tranny 3200k miles since built.car was built back in MAY 2004.car is never driven.

car was professionaly built down south at road race engineering speed shop down in san diego.NO expense was spared.it dosnt not have a 7-bolt 4g63t motor it has a jdm 6-bolt block and head 4g63t.car has dsmlink ecu flash eprom.


im asking $5500 firm im in a bind and need cash fast.......... my big loss your big gain.real dsm lovers know what rre is and how much $$$ can be spent.contact me for more info


here is a list of the work done to the car at rre as is on the purchase order receipt word for word

description unit price

VALVE TRAIN PARTS


crower spring and retainer 350.00

s/s swirl polished 1mm oversized valves 240.00

hks cams 280 exh/280 intake 550.00

ENGINE BEARINGS



clevite connecting rod bearings 60.00


clevite main bearings 80.00



OIL PUMP



new oem oil pump 1g with case gears and castle plug 175.00



balance shaft removal kit 50.00



GASKETS




mitsu factory head gasket 95.00



factory gasket set 210.00




ENGINE REMOVAL AND INSTALLATION 600.00



TURBO




turbo water hose 20.00



exh. nuts and washers,set 18.00



exh. studs ,set 22.00



modify 2g motor mount 15.00



modify 2g motor mount bracket plate 5.00



modify 2g timing belt cover 10.00



oem jdm mitsu tdo5h big 16g evo 111/3 turbocharger 1100.00



port and polish of turbocharger 150.00



wastegate delete 100.00



tial 38mm f38 wastegate 320.00



tial red and blue springs 60.00



punishment Elbow Outlet 38mm Pipe for wastegate 80.00



turbo Stainless Oil Feed lines kit 100.00



greddy type-s blow off valve (bov) 200.00




ENGINE MISCELLANEOUS PARTS



2g 95-97 cam angle sensor(w/wiring harness) 250.00



set of spark plugs(ngk b7es(4)) 40.00




CORE CHARGES



used short block 500.00




HEAD WORK



555 reurface head,grind valve seats,3 angle valve job 350.00



silicone bronze valve guide set(8 intake,8 exhaust) 80.00



labor:grind valve seats for oversixed valves 100.00



stage2 port and polish head: match port,



clean around valve seats,and smooth ports. 400.00



fuel injector o-rings:upper and lower 14.00



TIMIN BELT PARTS


timing belt 67.00



timing belt hydraulic tensioner 1g 80.00



timing belt tensioner pulley 25.00



timing belt idler pulley 36.00



6-bolt water cooled filter housing new 80.00



water pump 1g 100.00



thermostat 1g 12.00



PERFORMANCE ENGINE PARTS



wiseco pistons 450.00



eagle rods 400.00



arp main studs 55.00



arp head stud kit 90.00



injen cold air intake 200.00



1g stock intake manifold 150.00







EXHAUST



apexi down pipe 3" 200.00



apexi 3" exhaust n1 400.00



2g stock exhaust manifold n/a




PERFORMANCE LABOR


balance complete assembly,blue print 200.00



deck resurface and reinforce 95.00


LABOR(DEPENDING ON CONDITION OF CORE)



strip to long block and re-assemble 300.00



build long block, clean, strip gaskets,



hone cylinders, check clearances, and assemble



6-bolt long block. 700.00



bore cylinders 0.20"(0.50mm)or 0.40"(1mm)oversize 150.00



polish crankshaft 80.00



line bore block 120.00



FUEL SYSTEM



walbro 250 200.00



jdm evo8(560cc) pink tops injectors 600.00



CLUTCH/TRANSMISION



shepracing.com stage3 Transmission 1975.00


bg syncro shift (3) 29.00



centerforce clutch 450.00



fidanza aluminum flywheel 380.00



LUBRICANTS


anti freeze 11.00



break in engine oil 15.00



k&n oil filter 6.00



total:


kelly blue book on car is $3700
$14,000,thats not including the car yet.. just mods!have ALL papers...once again im only asking $5500.00 frim on price for everything!
NO low balling car and mods together are $17,700 so $5000 is a steal
car runs 12.3's to 11.9's in 1/4mile as of now.with a bigger turbo like 50 trim could run 10's 9's.engine was built to withstand 35psi of boost




spec's on tranny

New 1-2 Fork New 3-4 Fork New Shep Trans Spec 2nd Gear New 1-2 Hub/Sleeve kit with Double Synchro Rings New 1-2-3-4- 5-R Synchro Springs New 5th Gear Synchro Rings New Input, Output, and both Drive Shaft Seals New Input Shaft Bearings New Intermediate Gear Bearings New Roll Pins New End Nuts New Center Diff Side Shims New Nylon Shifter Pad Shims for setting preload Upgraded Torrington Bearing Bead Blasted Case 4 Spider Center Differential Heavy Duty 3-4 Conversion Transmission filter upgrade Upgraded Rare Earth Magnet EVO III first gear and input shaft

$500 OBO, I can ship by freight or you can pick it up, no reasonable offer refused. 115,xxx miles. I'll link pictures within the week. Also have a couple sensors and more to come. Here's a link through craigslist, please e-mail through the link, I'll be able to respond quicker.

http://scranton.craigslist.org/pts/1411498705.html

Well the problem... i totaled my 1995 Mitsubishi eclipse GS the radiator, computer, and air intake are gone and the front in is smashed in but it still has a brand new (16,000 mile motor) with mild cams and bored .010 over with all forged interiors and whatever other parts you could need. just ask and ill tell you what i have and get you a price

Like all the other relay harnesses out there, this one utilizes the solution described by afeudale to eliminate the Daytime Running Lights (DRL) on 08, 09 and 2010 Lancers. I provide the modified relay harness, ready for installation. Will work with aftermarket HID kits that have 9006 plugs, and also with OEM headlights. Maintains normal headlight switch function: All lights off // Parking lights on // Low beams + Parking lights on

Check my feedback on eBay under alchemist3136 and you'll see I'm an honest seller/buyer.

The harness does not require any modifcation to your current OEM wiring. Simply plug the drivers side headlight cable into the harness, plug the two male harness plugs into your bulbs (or ballasts), then connect the red wire to your battery and the black wire to one of the grounding bolts near the battery. Care should be taken to avoid bending the modified area on the wire used to trigger the relay. The electrical components are located in this area and may be damaged by extreme bends or pressure.

I have one assembled and ready to ship (in a box, not in a cheap bubble envelope) via USPS priority mail in the USA. Price is $33 + $5 for shipping, for a total of $38. A tracking number will be provided. Payments accepted: Paypal only. Will ship within 2 days after payment. After a harness is purchased, I will obtain the parts and assemble another one...so I should always have at least one in stock.

Parts sources: The assembled relay harness wiring comes from an online store. The resistors, capacitor and mosfet are from Radio Shack.

If interested, please message me - I'd be happy to answer any questions.

The harness modifications will be soldered together in a professional fashion. I spent 5 years as a circuit board assembly tech, so I know my way around a soldering iron. Once assembled, the circuit is then coated with liquid electrical tape to seal and protect it from the elements. After the liquid electrical tape has dried, heatshrink is used to seal it all up. I also add a layer of automotive grade electrical tape, since you can never be too safe.

*DISCLAIMER - The modification of your cars electrical system is dangerous and may result in personal injury and/or damage to your vehicle. When you purchase this item, you assume the potential risks associated with using a non-OEM wiring harness to operate your headlights.*

Return/Warranty Info:
Defective items may be returned for up to 2 weeks from time of delivery. The two week warranty will be void if the harness is tampered with in any way. A full refund, or a replacement product (your choice) will be provided if the harness is confirmed to be defective by me.

Rain/Sun guards-- These are stated to fit 99-03 Galants.The set is brand new.I mistakenly bid & won 2 sets off eBay,& I have another set on my 99 Galant already,so I'd like to sell these off.Some may not like the look,but I like the way they work & look, & for security,air circulation,etc. Heres the info-> Product Features:

* 100% Brand New
* Reinforced Acrylic in Dark Smoke Color
* Helps to Reduce Heat Build-up in Parked Vehicles by Allowing Windows to be Partially Open
* Easy to Install with Included 3M Brand OEM Approved Tape. Just Clean and Apply on Flat Surface
* Keeps Rain Out and Lets Fresh Air In ---Asking $35.00,not including ship costs...

selling a 1997 sea-doo bombardier waverunner. it has really low hours. (220) brand new starter and battery. asking 2600 OBO.
comes with great condition trailer and 3 lifevests. (boat seats 3)

take trades on PS3/360's. guns and anything else you may think i'll like.

mike

For Sale is my 1992 Mitsubishi Galant VR-4, it is number 813 of a 1,000 made in 1992. For those who don’t know too much about the GVR-4, it was a Limited production model, with only a little over 3,000 making it to the U.S, 2,000 in 1991 and 1,000 in 1992. They come with the well known 2.0L Turbo 4G63T motor, also found in the EVOs, Talons, Eclipse, ect., transferred to an AWD (All-Wheel Drive) 4WS (4-Wheel Steering) drivetrain. It is an OE Belize Green Metallic with some minor body defects, mainly on the passenger side rear quarter and fading clear coat. It has about 109,100 miles on chassis and block, but a rebuilt cylinder head was placed a little over 5,000 miles ago. Nothing was wrong with the previous cylinder head, just wanted a fresh one, old head gasket needed replacement. Pistons polished and engine deck was thoroughly cleaned, TopLine Lash Adjusters, New Timing belt, ARP Head studs and Cometic MLS head gasket placed during rebuild. New ACT clutch, OE clutch fork and ball, SS Braided Clutch line, RRE Light weight flywheel and replace all fluids in Trans, Transfer case, and rear differential at the same time as cylinder head replacement. New Evo III Turbo, Evo III exhaust manifold, exhaust piping, Evo VIII FMIC, so on, were also install at the time of the cylinder head replacement. Evo III exhaust manifold, OE intake manifold and Exhaust Dump Pipe all ceramic coated. Others modifications listed and extra parts that weren't able to be installed, will be included with the vehicle, such as Walbro 255lph fuel pump, Balance Shaft Eliminator kit, Old OE parts. This is a pretty rare car and fun to drive. Put over $7,000 in parts and labor on this vehicle, and only asking for a fraction of that.
$4,200 OBO, serious buyers please.

Email: silvia_dorifuta@hotmail.com
Phone: (909)936-9744

Engine:
Rebuilt Cylinder Head
TopLine Lash Adjusters
ARP Head Studs
Cometic MLS Head Gasket
OE Intake Manifold (High Temp Ceramic Coating)
NGK Iridium IX Spark Plugs
JDM Evo III Turbo Exhaust Manifold (HT Ceramic Coating)
Big Evo III 16G Turbo (Turbine Housing HT Ceramic Coated)
Copper Exhaust Manifold Gasket
Evo VIII FMIC
Custom IC Piping
Evo VIII Custom Intake Pipe
NTK O2 Sensor
NXS Boost Controller
Accel Spark Plug Wires
Accel Air Filter
3” Down Pipe
Turbo Outlet/WG Dump (JetHot Ceramic Coating)
Custom 3” Exhaust System w/ HKS Muffler
HKS FCD (Fuel Cut Defencer)
New Radiator
Transmission:
ACT Street Clutch
RRE Light Weight Flywheel
New OE Clutch Release Fork
New OE Clutch Fork Ball
BG Syncroshift II Synthetic (Transmission)
RedLine Shock Proof Gear Oil (Transfer Case & Rear Diff.)
Stainless Steel Braided Clutch Line
Interior:
JVC Stereo w/ CD changer
Front & Rear Strut Bars
C-Pillar Bar
HKS Turbo Timer
Kazama Shift Knob
Kazama D-Knob
Carbon Dual Gauge Pod
ProSport A/F Gauge
ProSport Boost Gauge
Exterior:
RalliArt MudFlaps
Momo IDEA Wheels 16x7.5” +38
HKS Muffler
Extras:
Walbro 255lph Fuel pump
Balance Shaft Eliminator Kit
Old OE Parts









There are switches to swap between amber and white lights…




THANKS for Looking.......

Hello, I recently bought a brand new l200 animal it was a exdemo, and only did 400 miles, when i bought it from the mitsubisi dealership in dursley it came fitted with a SUT2 sports utility top 2.

i removed the top because i wanted the roll bars instead and obviously both could not be fitted. So im selling it.

The item is in BLACK. the glass is privacy glass. Also the back is lockable and comes with 2 spare keys. There is also a light inside thats easily connected to any 12v wire. but doesnt have to be used if you dont want to.

i can ensure you the SUT2 is immaculate no scratches, marks or anything like that, its like brand new!

Picture (may take a while to load be patient):



THIS ITEM IS THE OFFICAL BACK! IT ISNT NO KNOCK OFF!


Price: 600 pounds ono

Anyone on here will tell you its incredibly cheap for a SUT2 for the new l200. (mk5)

this item cost over 1000 pounds brand new, check the mitsubishi website.

Please post or give me a call on 07885473073

Item is being kept in great storage and ready for pickup when ever.

items: H-beam conrods, crankshafts, turbochargers, cam gears.
Price: best offer
contact: msrjackie@gmail.com

some very nice aftermarket parts to clear out:
Maybe there is something you need.
Contact me with what you are after.
Money need, price will stand on your side.
Anyone interest, plz contact me via

msrjackie@gmail.com

i have a 97 eclipse gs mt. fri cylinder 1 became a fish bowl. debating on repair and selling or parting out or sellling as is. guess im just looking to see how many pple need parts. givin this forum first pickings. let me know if u need anything and ill part out if there is enough pple. thanx

I have a 3.2 Fidanza Clutch Kit and Flywheel for a 95-99 eclipse/talon non turbo (420a Motor) up for sale. It comes with the pressure plate, clutch disk, flywheel, throw out bearing, alignment tool, the 8 bolts that hold the flywheel to the crank, and the 6 bolts that hold the pressure plate to the flywheel. The disk is a 4 puck made out of kevlar. The flywheel also has a detachable surface so you don't ever have to send it out to get resurfaced. You can buy a new surface for it on many websites and just replace it yourself. All you need is a screwdriver to take the surface off. All the parts are brand new and have never been used. The total value of everything is around $750. I'm asking for $500 or best offer. If anyone is interested and/or has a reasonable offer please pm me. I'm located in New Jersey and I don't have a problem shipping as long as you pay for shipping.

Will make a good donor car for AWD swap. Can has a good running 4G64 engine. Auto trans is out from hitting something and loosing fluid while driving. Car drove great. Body is decent too if it is of value. $299. Car is by Lincoln, NE. I can meet you at Exit 420 on I-80 with car. Call or text 402-450-7474 or email Phil_weber@hotmail.com

I have an unpainted Aerogear AeroExtreme Body Kit (Front Bumper, Sidekirts, Rear Bumper, etc) for a Mitsubishi Eclipse (1995-1999)....I paid over 900 dollars (with receipt)a few years ago for this and I no longer have the car and this kit never got a chance to be mounted....I am looking to get somewhere around 500 for it. Thanks for checking out this post!

I am Mr.Atit Sathavorn from Thailand.I’m a manufacturer of fiberglass hardtop canopy.My company is based in Thailand where we are able to use newest technologies to finish our fiberglass products. Our goal is having a full European quality standard.
I supply good price and reliable quality hardtop canopies fitted to all Japanese pickup commercial trucks.Especially Mitsubishi Triton.Painted colour matched to vehicles or in 2K.

4 x New Pearl White 17x7, Enkei Wrc Tarmac wheels

4 x New 215/55, R17 michelin tyres Fantastic condition fitted

Included 16 x new wheel nuts and 4 x new lock nuts with 1x key all brand new condition,

Will fit any Japanese cars with a 5 stud wheel pattern: Skyline, EVO4 Etc.

they were on a honda hrv for 1 month but sold car

paid $2000 for the set brand new. selling for $1000 o n o for the lot

Excellent condition

if your really interested please don't hesitate to make me an offer

contact me on 0448377683 or at mrnigz@hotmail.com location is melbourne victoria australia, cheers

Both described Service Manuals, complete, in very good condition $30 shipped, paypal only

Hey everybody so I am about to part with my baby and am looking for serious buyers before I sell it.
If you have questions PM me and I'll get back to you asap.

For sale:
1997 Mitsubishi Eclipse GSX (awd turbo auto transmission)
with:
-New rebuilt engine with weisco pistons, eagle rods, acl bearings, crankshaft (newly dipped shortblock)
-Brand new Evo III Big 16g turbo
-Recently replaced spark plugs and wires
-Upgraded intake and filter
-New rebuilt transmission with new torque converter and end clutch kit

Everything else is completely stock. Never been raced or abused. It's been pretty much babied since the day I got it, and for a GSX that's rarely the case.
The Black Interior and Gray Exterior is in flawless condition.

HOWEVER, there is a problem with it. The engine needs more tuning. It's about time not money. The repairs are not expensive since it has all the parts you need to make it bulletproof.
BUT, I am lacking the time to get this done since I have 2 jobs right now. This is why I am looking for serious offers here before I put it on ebay motors.
I could easily trick you into buying a very excellent looking lemon, but I am not a liar. I despise sellers who lie like that.
I am being up front and honest which is also rarely the case. Get ready for a great deal from an honest seller.

Selling Price: $5000 or best offer
I have put more than 3000 into the car that was worth 7000 when I bought it. For the condition of the shell and the parts under the hood this is truly a bargain.

Auto trans is great for first time drivers. If your experienced enough it can even be swapped to manual. The car is fast with potential of incredible horsepower, but shouldn't be abused.
I am located in Maryland but can have it shipped anywhere in the U.S.
Let me know if your interested.

Odometer: 140,XXX Mileage on Engine: 73,XXX
Body Style: Coupe
Exterior Color: Silver
Interior Color: Silver
VIN: 4A3AK44Y6SE140384
$2,250.00

Engine: 2.0L I4
Transmission: AUTO
Drivetrain: FWD
Doors: 2

This vehicle has been on loan to a friend for months and I just got it back. I have no use for it and would like to sell it ASAP. I am willing to negotiate the price, but please don't expect it steal it for nothing. I bought the car approx. 2 years ago and replaced the engine first thing with a powertrain from a 1997 model with 73K miles. The engine runs great. The A/C blows cold. All electrical works. Tires are in good shape. The exterior and interior show its age, but it's a great daily driver.
The registration is expired and it's sitting in front of my house collecting dirt.
I drive it around occasionally, but I really don't need it right now. It has some hickups probably because of bad gas. It just needs some TLC.



Thanks,
Rob
626-216-8156 cell [attachment=11479:100_1076__Large_.JPG]

I am new to the dsm world and I have acquired a bunch of parts I am trying to get rid of. None of these parts are stolen they are just parts I have no use for. They are all in working order and should have no problems at all. All prices negotiable just let me know what you need and we can work a price out.
All parts are for 4g63 2.0 eclipse

1 set of turbo pistons and rods
2 one set of stock turbo cams
3 one set of stock non-turbo cams
4 (2 ) turbo MAF sensors one with intake tube
5 Turbo alternator
6 Intake manifold complete with all sensors and newer throttle body
7 Bare intake manifold
8 (5) stock fuel rails
9 Transfer case
10 4g63 head with 3 angle valve job good shape
11 4 cam gears
12 Timing belt gears
13 3 underdrive pulleys
14 Rear seal
15 (3) egr valves
16 1 o2 sensor
17 3 hydraulic tensioners
18 2 belt tensioners
19 Turbo oil line
20 Stock laser tail lights

If you see something in the pictures you need let me know.
txt/call 216-408-9498
or email esmyczek@kent.edu
thanks eric

FS: Injen Cold Air Intake + Hydroshield
Details: Fits 09 Lancer GTS with 2.4L engine.
Condition: Open Box, used for 0km.

Local Pickup in Toronto.
PM me if interested.

I got a few parts I am looking to sell. DONT BE SHY TO MAKE OFFERS. I need this stuff GONE ASAP Smaller stuff I can ship bigger stuff needs to be picked up. Im located in hazlet NJ.

I have a complete 87 2.6 motor. 86k Its in pieces though spun bearing what a surprise. Crank needs regrind but cam rods n pistons seem to be in good shape. ARP rod bolts in them. Its also got 2 1000cc injectors in the manifold. Also new oil pump. Throw an offer

I have a stock garrett tb308 factory turbo, equal to super 60 trim Its off an 80s riviera. Flows like 450cfm or around there. .60 a/r in and .82 a/r ex. It has a 3 bolt t3 flange but I have an adapter plate to mount to DSMs conquest starion. Internal wastegate 7-10psi. Also have the conquest downpipe for it and oil feed line. No play in out or side to side I only used it for a few miles since rebuild. Looking for 300obo

2.5 jdm sport intercooler and pipes. They fit a conquest but I still have more pipes and couplers to make them fit something else. Also has a greddy style BOV with the flange pipe. 160 Obo

I have a stand alone megasquirt ms1 pcb 3.57 built to control spark fuel and timing and the harness to hook it up. 300 Obo

I got a 87 conquest trans 86k on it 5speed. 150 obo SOLD

Brand new Stage 2 street clutch with pressure plate and resurfaced flywheel 240mm 150 obo

ARP head studs used once but car was only ran for 20 seconds. 80 obo

Bosch wideband O2. 40 obo SOLD

Conquest starter. 50 obo

Stock oil cooler with lines. 60 obo

Stock Power steering Pump with Lines. 60 obo

I am basically looking to get reasonable prices for the turbo MS1 and intercooler stuff that was all basically brand new. Throw me offers its taking up space and Im starting a v8 project this week. Either email me h3r3tic@optonline.net message me or call 732 735 4280 My names is Rob I pretty much answer from 9am to 2am so any questions feel free to ask. I can also get more pics

I also have a spare 302 5.0 v8 mustang motor. 1993 110k pulled running from auto mustang. 400 obo

Im losing a lot of money on this so Im taking what I can get either way to put towards my new project. Dont be scared to call.
I accept PAYPAL

MIRROR COVERS ARE SAME AS PICTURED....

INSTALLATION INSTUCTIONS INCLUDED:

YOU WILL RECEIVE BOTH LEFT AND RIGHT COVERS:

BRAND NEW FACTORY OEM:

NOTE: THIS AUCTION IS FOR THE MIRROR COVER NOT THE ENTIRE MIRROR ASSEMBLY:

Visit My Ebay Page

MITSUBISHI LANCER CHROME FRONT GRILLE



*INSTALLATION INSTUCTIONS INCLUDED* INSTALLATION TAKES ABOUT 30 MINUTES

NOTE: NOT AN AFTERMARKET GRILLE: FACTORY OEM.

Visit My Ebay Page

I have a 2g eprom ecu Im lookin to either sell or trade. Im looking to get around 175 for it. Trades Im intrested in is either bigger injectors or intercooler piping and couplers/clamps. Please email me with what u got and include pix plz.

nina_n_aaron666@hotmail.com

looking for a 97 manual transmission 420a ecu. thanx