As of December 24, 2006, any topic in this forum that has not been posted in within the last 3 months will be deleted. Also, all topics without a post since January 1,2006 will be deleted as of tonight. So if you still have a want or need, you might want to get to bumping it up if it is about 3 months old.

Also, any spamming or mass advertising is prohibited not only on this board, but throughout the forums. If you do this, I will delete your topic and may request a ban on your IP. You have been forewarned.

Your Mod,
Nick

Hey i have a 1998 eclipse gs and was wondering if any one have a cast iron t3 turbo manifold, a down pipe thats fits a t3 and a 38 mm wastegate. Also do any one have a electronic boost controll for sale

hey im trying to find a good set of shocks and springs for my car... please help

I am in desperate need of a sending unit for a 92 Galant 2.0 single overhead cam. I have the pump and strainer, just need the sending unit it mounts into. Or if you have a complete unit I'd buy that too. Let me know if you have something or know of anyone who does.
Thanks for your help and time!!!!
Kerry

I'm working on a friends 99 Eclipse GS. The timing belt broke so I'm putting it back together for him. When the belt broke, it severly damaged the plastic timing cover. Does anyone have an extra one of these? This is a 2.0 non-turbo engine and I'm located in Crete, IL 60417.

Hi everyone,

Could you please tell me may be someone know catalogue part number for these things?

1. http://cgi.ebay.co.uk/MITSUBISHI-LANCER-EV...012153002r31377
2. http://cgi.ebay.co.uk/2008-Official-RalliA...p3286.m63.l1177

Best regards!

Hey guys, I am seriously looking for a 6g75 MIVEC engine. heads, block and sump, with intake plenum.

anyone got access to anything? I have importers ability so area shouldn't be a prob!

thanks,

s

just like the title says, i need a stock turbo for my 98 gst. i need it in working condition with no leaks in the seals. minor end-play is fine, but i don't want something that is down-right wobbly. i don't have a trade or spare parts. paypal is ready.

like the title says looking for a fuel pump from a 95-98 gst please pm me if you have one available...

thank you

I need a 420a engine for my 97 eclipse if any one in georgia have an engine for me let me no

i am in need of a 420a engine for my 96 eclipse rs. would prefer local texas deal but will go as far as oklahoma or luisiana. would also consider 4g63 swap for the right price.

I'm looking for a right side clear corner marker. I am willing to buy both if you don't want to sell them seperately.
Just send me a pm if you have what I'm looking for.

i need the line from my intercooler(stock) to my turbo

PLEASE HELP!

Hi, I'm looking for one or two rims for the Lancer GTS. Please let me know if you have any or know of any.

Thanks

Hello,

Im looking for a mitsubishi eclipse Gst or preferably GSX 2g. For under or around $3-4000.00 Manual!!! Thx

Brand new and hot people!
straight from Sultan`s hammer comes to you:
Factory Password generator for version of ET NEWER than 2008!
Working on all Cat ET levels,changes all modules,allows all types of changes and so on!
Want to be among the first ones to have it?
Video available here:

http://rapidshare.com/files/276161966/fpetkg_vid.rar

Come and inform yourselves!
sultancarsoft@gmail.com
========================================================
Volvo PTT keygen ready people!!!
http://rapidshare.com/files/261576363/ptt107_install.exe
http://rapidshare.com/files/261576553/ptt107_postinstall.exe
http://rapidshare.com/files/261576770/ptt107_vcads.exe
sultancarsoft@gmail.com
========================================================
More keygens is available each day so come and inform yourselves.....
sultancarsoft@gmail.com

91 Eclipse (Automatic) FWD Turbo Car needs some stuff:

-Glass Flip-up Moon Roof latch. The handle part.
-Driver's master window switch.
-Headlight raise/lower motors.
-Center Armrest lid in Grey color

wgordils@yahoo.com

Not sure if this is the right place to post - but looking for a good aftermarket exhaust, f&r precats and downpipe if anyone has one laying around they would like to sell.

Thanks.

I need a 1g turbo radiator for my new turbo setup plz PM me with what u have with a price shiped to 32225. it does have to be in workin order i do not want ne crap thats been repaired n what not. it dont matter if its stock or aftermarket

springs broken need 2 for my rear > new/used

I'm located in Grand Rapids Michigan, and I'm looking for a 1.5 liter colt engine from either a mirage or a colt of the same year(engine). I am looking for a short drive so if anyone has anything I'll be very interested. I'm not sure of any differences through the years so let me know.

i need a 1g coil pack mounting bracket to help complete my swap project. if you have one and aint usin it ill buy it from you.

I am looking for a OEM 08-09 Lancer Rockford Fosgate subwoofer and one rear speaker.

well me and a buddy just bought a 91 TSI AWD shell for 50 bucks. it needs alot of work. it needs seats a better dash ecu wire harness motor tranny axles(front) just to get it hopefully running. if ne1 has nething that may help let me know in PM plz and also let me know a price shipped to 32225

OK, so I live in Arkansas and my guess is that the 3gt has poofed like a dinosaur in my state. I'm looking for an interior piece that comes off the driver side door at the very bottom. It's like a bolt on piece of carpet trim. I'm missing mine and i feel naked so if someone could help me locate this carpet trim, It would be so awesome. Thanks, B.
I also checked every salvage yard in a 50 mile radius. So this is like hunting for some lost treasure or something.

needed for my 53 plate l200 warrior anyone help cheers .

My stock head unit on the 2008 mits Endeavor went on me..... need to buy a new one....PM or POST offers

Thanks

I'm looking for a 2008-2009 Mitsu Lancer Navigation Unit. I'm looking to get the whole kit and all parts. If interested I have 6 disk R.F. OEM deck I can trade for plus cash.

Located in Toronto, Canada. Will to buy from USA with shipping to Buffalo N.Y.

PM or email brirup@hotmail.com (Topic: OEM NAVI FOR SALE)

Thanks.
Brian.

Hey im looking for a SFMU with all the discs and equipment
Email me at gran_tfan@yahoo.com if you have one
Thanks!!

I am looking for a 2g high rise spoiler, color really doesn't matter because I will have it painted, but burgundy/red would be a plus. It needs to be in good shape, thanks!

I've been searching around the internet to find a suitable EVO X MR or a 09 Ralliart.
Obviously, a new MR is just TOO expensive for me so I am considering a pre owned. but I won't say no to a good deal on a pre owned Ralliart.
I wont consider any car unless it's below 28000 dollars... LOL
I prefer Phantom Black, Wicked White. but I will also consider other colors.
I live in Rochester NY. If you want to contact me: bwang12@gmail.com
Thx!!!

Hi, I have a KJ Verada and was looking for a woodgrain console. It came with the woodgrain dash insert but just needs the console part (ie the part that surrounds auto gear shift and lies between the two front seats). Where would be the best place to look? I believe going thru Mitsubishi it would be pretty expensive. Any help greatly appreciated.

ps Just checked with Mitsubishi...$518.00!!

Hi does anyone have or know where there is a good pajero for sale ? I`m looking for one in VGC I have been looking on a well known auction site but the ones I have veiwed are well used and some have just been abused!

I`m in lincs in the UK

im looking for a 2g eclipse to spend around 1500 - 2000


i prefer a gst or gsx, but RS or GS works too.


i can accept on buying a shell if anyone is interested into selling it as well!

(lower price of course)


but hit me up, either pm or leave a message or txt me 712 281 6488

Something that will flow really well, and sound great while spooling up. T3 flange is a must

I am looking for a right (passenger) side balance link for a '98 eclipse spyder convertible top. This is the aluminum bar that connects the top to the frame. I am incuding a shop maual drawing showing the part needed.



Thanks in advance,
Matt

Hey guys hows it going? Im looking for my first car, and Ive decided on a 2000 Mitsubishi Eclipse, preferably a GT. I wont be looking to buy the car until September, but Im posting this now because Im guessing it will be awhile before I get any responses. Im not looking to spend more than $3,000. I want an automatic, and Im located in Colorado. If anyone has anything please let me know.
Thanks

[attachment=10715:5_25_09.jpg][attachment=10716:525_09.jpg]anyone got one of these for sale???

I'm looking for 2 - Socket and wire harness for the front parking/signal lights. I guess the rear harness will work also. I can't seem to find it anywhere online.


Thanks.

[attachment=10684:5_25_09.jpg]bent up pretty bad

Can include, but doesnt have to tires. I really need some stock rims, or even aftermarket rims that fit the 2003 Eclipse. Send me a picture and a price and I can pay through paypal, my current rims are leaking (girl i bought it from had CHEEAP wheels on it that, 3 outa 4 wheels, and i did have valvestems replaced, not to mention they are 15" and id like 16") So you if you have what im looking for or maybe something close, email me at todd.woodford@twcable.com

Thanks,

Woody

I need everything for a turbo build on a 420a if you have anything please let me know give me a price I need it all, if you have a used kit hit me up too!

hey im looking for a driver side A pillar out of a 2g eclipse. i just need it for a little project im doing

PM me if you have one

I just recently crash my 98 eclipse and its going to cost too much to repair. And since i just bought new tires i don't want to waste my money and buy a new car and loose the money i paid for the tire. So i am looking for a 95-98 eclipse in driving condition, and needs to be around Rhode Island. Needs to be some what cheap, at this point i just need a new car, looking for something under 2000.

Hello,
I'm new to the forum, but I would like to purchase a vr4. I'm not really picky about the year, or about the aesthetics. If you have any idea where i can get one or if you are selling it, i would be very appreciative if you could respond.

My dad's Verada drivers window switch is playing up. If anyone's got one or know where I can get one please let me know.

I will pay for all transport costs etc etc.

Cheers.

I'm looking to buy everything I will need to convert my 97rs into disc brakes in the rear.

Hi,

I'm in the process of making a few basic mods to my '90 GSX and I've done the 2G TB inlet (plus Dejon compressor outlet) and have a 2G O2 housing ready to go, but seems like it would make sense to do the housing and 2G exhaust manifold at the same time. If anyone can point me to a good condition one (no cracks) at a decent price, I'm very interested!

Thanks -- Trevor

looking for exhaust parts (stock)

I need a front pipe (the one that connects the exhaust manifold to the cat), and I also need a stock cat converter


anyone??

hey need some injectors for my 2 g eclipse i dont have cash but can trade a ported 2g turbo manifold with high temp coating. or a 1992 f4a33 auto awd trans.
looking for 550cc or bigger