Let's try this again. I FINALLY found the stickers I had. My roomate said he threw them away but, there they were, in the broom closet where he stuffed them along with other things.

So, for the 20 small ones and 20 large ones I have left I will be taking orders AGAIN for Mitsubishi-Forum.com window decals.

These will help you and other members identify each other...

4G15 1.5 SOHC 12V
4G37 1.8 SOHC 8V
4G61 1.6 DOHC 16V
4G63 2.0 SOHC 8V
4G63 2.0 SOHC 16V
4G63 2.0 DOHC 16V
4G63 2.0 DOHC 16V TURBO
4G64 2.4 SOHC 8V
4G64 2.4 SOHC 16V
4G93 1.8 SOHC 16V
6G72 3.0 SOHC 12V
6G72 3.0 DOHC 24V V6
6G72 3.0 DOHC 24V TURBO V6


4G61 1.6 , 4G63 2.0, 4G64 2.4 (SOHC, DOHC, DOHC TURBO)

Covers the following
manual transmissions: F4M2, F5M2, F5M3, W5M3, W5MG1, W6MG1, R5M21, V5MT1, F5MC1
Automatic transmissions: F3A2, F4A2, F4A3, W4A3



manual transmissions: W5M31/33 EVO I - EVO III

...

So, here's the deal, i'm a new MOD to the forum. it would help me a lot if anyone who notices SPAM or JUNK posts or someone curseing excesivly or just abusing the forum, please PM me so i can handle it ASAP.

thanks a lot
-mike

this one isn't a part site but may be very helpful in converting those pesky standard to metric numbers

default/liebe011.gif' 'liebe011.gif' />...

i need some recommendations on everything car cleaning. what brands you prefer for everything. windows, seats, nasty smells, dashboard, wax, car wash. thanks all!

I have just downloaded the service manual for a 4g63 engine and need to know what are the best sealants (am based in uk) for th following

rocker cover
"oil pan gasket"
coolant temp. sensor

any help.
thanks

Just out of curiosity...

For all you DIYers out there who do engine builds on your own (mostly I'm asking non-professional), how did you learn/who did you learn from? Former job as a mechanic, hanging out at your mechanic's garage, friends, shop class, technical school... I'm interested in hearing stories and some differing viewpoints

[B] does anyone know which of the 4 cyl engines were used in the forkfifts?...is it the same basic engine as the car or truck engine?

Is there a substitute for Mitsubishi power steering fluid? Some other forum members have used regular p/s fluid or Dex/Merc ATF.

I asked a guy at my local dealer, and he immediately started barking at me. Basically he thinks that anyone who doesn't use genuine products in their Mitsubishi is dumb. So that was useless.

Does anyone have information on the mystery Mitsu...

Howdy, all,

Does anyone know what the Mitsubishi engine designator (model?) is for the ubiquitous Mitsubishi 2.6 liter engine / Mikuni carb, used in so many different makes and models of trucks and minivans? You know, like 4G--?

Further, where might I find an engine manual for it?

Thanks in advance...

Hi Everybody,

I got the bluetooth onboard kit installed on my Outlander 2008. Seems to be working fine, but when on the phone, only the right speaker is working, and the left one remains silent... Is it the normal behaviour, and has anybody already encountered this? Did they just forget to plug left speaker cable to the bluetooth unit? ...

Hey Everyone,
I work with Mitsubishi Canada; we just kicked off a little contest running through the week to Sept 15, leading up to the rally at Targa.

Go to MitsubishiTarga.ca and check out the decal design tool. You can create your own design, view the other submissions, get votes, share on Facebook. The winning design will get printed and placed on Andrew Comrie-Picard's...

I have just bought a mitsubishi eclipse gs spyder with an 2.4 4g64 engine. I have looked everywere after a ignition coil for this car. Can anyone help me?

just did a coolant flush, need to know where the bleeder valve\screw is on a 2001 galant es. the temp goes up a little past the middle, and comes back down. thanks in advance

I bought this car and it's missing a rim cap, the problem is I have no idea what brand of rims these are so I can't get a new cap. Anyone familiar with this logo?
http://zweg.com/dump/thumblist.php?show=SD531863.JPG

(The image tag didn't work with me sorry)

Is it normal for an engine oil to smell a little bit like gasoline? I smelled the unused oil but it does not smell the same. I just changed my oil a week ago and seldomly using my car since it was changed.

Ok...

You know how people touch up large areas on the cars before painting them. It's like this grayish putty or whatever that you put on and then paint it over.

I was wondering if there is anything like that for plastic, if there is what is it, where do I get it and how do I do it?

Can I use the same stuff on plastic as they do for metal?
I have some...

Please Visit http://razoredgeracing.com/index/chat/ . Enter A Username And Click Join!

Hi,

My parents own a magna tp, '92 model and the battery light goes on and off. The battery light usually indicates that the alternator has failed (?), so we took it to an auto-electrician to test it out and it passed with flying colours. we then procceded to clean the terminals, tighten them as much as possible. We have looked for any wires that could be touching anywhere to cause...

just out of intrest, can you buy after-market turbo's for diesels?

ie: on a petrol engine car you can upgrade the turbo for bigger boost etc, so can you do the same for diesels? or is it different?

thanks.

(yes, im a novice to this! default/laughing.gif' ...

i37.photobucket.com/albums/e97/members1862/IMG00244.jpg' />

On that mirage those black things that Evos usually have, at the top of the back windshield. Where could i buy them online? or on ebay what should i search

does any one in here is a mitsubishi myspacer
evo myspacer
lancer myspacer

hi jusr wondering does a 4g93 engine fit into a proton persona 1995 and will a mitsi colt body kit fit i.e front bumper???? any help would b gratefull

Mitsubishi Evo X FQ300 vs Subaru Impreza WRX STi older generation of both cars where better.

back in 02 I had my 95 TSI. At the time I had Venom cam gears and a Venom intake manifold (beautiful). Did they stop making products for our cars? I thought their products were very nice and clean looking.

Hi i am contemplateing buying a 95 mitsubishi lancer manual transmition and 2.0 cc engine gasoline, my rvr is a diesel , what problems do u think i might encounter in that swap and do u think its a wise swap?any imout u guys could give before i start spending money would be appreciated thanks

Hi all, lttle background on my air conditioning system first. I have a pajero 2.5 turbo intercooler. Last week the aircon belt broke because the tension pulley had siezed solid. I replaced the bearing but noticed that the pulley on the aircon was a bit loose with lateral play. I ignored it (woops?) and fitted the new belt, tensioned it and the aircon worked fine. Today, however, I was driving...

Ive got a set of Konig verdict rims for my g3 eclipse. Unfortunitaly I need to replace one and I am having trouble identifing the finish of the wheel.
Mine appear to be silver but the back half of the dish is black. Actually if you look at the wheel from the back its all black?
They appear to make 2 finishes for the verdict rim, silver and opal. I cant realy tell the differance...

hi guys,

I'm looking for a few good mitsubishi mechanics! I work with a newly launching autos site (it helps people out at the early stages when they are trying to figure out which car fits their needs). We feature lots of reviews for each car. We're focusing right now on reviews from mechanics. We pay $10 per generation (in series of 5 reviews/$50) for a...

Hi, me and my dad are thinking about buying a fto gpx/gp version r, or somthing simular. But the problem is I cant find a insurance company that will insure us as Iam under 25 =( and the car is a import
I'm only 17 at the moment is there any chance what so ever I can get insured as a named driver or will I have to wait till im 18??
thanks
Jake

Hi all:

I am moving to the San Francisco Bay Area in the middle of this year. I have searched for used Mitsubishi cars in the web, and found a few... I don't have a big budget.

However, what bothers me is that there is not a lot of good things people say about Mitsu dealers. Things like dealerships closing down, etc. I may have a great car, but if service is not good, it...

I can't seem to find a manual anywhere for a 4G94 (in an 04 Lancer OZ Rally). I found the ones on here for the 4G93 and 4G92, but not the 4G94. Any help would be greatly appreciated, I'm trying to replace my condenser.

Hey guys,

I own a pajero/montero 1996 model 3.5l V6 fully loaded SUV.It uses the 6G74 DOHC engine. I changed the timing belt and tensioner, as well as worked on the hydraulic lifters recently. Now that the engine was closed up and running againwhen I revv the engine I am hearing a grating sound coming from the engine body.The mechanic said that I have a bearing knock. I didn't have...

I have an early 80's 4G63 motor that is having problems drawing fuel up to the carby.

I have replaced the fuel filter, all the rubber fuel lines and flushed the chasis lines with compressed air to ensure there are no leaks or blockages. I placed a vaccum pump onto the fuel line before it connects to the fuel pump and I can easily draw fuel from the tank

I have replaced...

Will you suggest any?
I only know little about mechanic thru surfing the net.

Hi All,
Can someone perhaps shed some light. Recently i went on a 4x4 trip and one of the indicator light on the dash went out. I have not lost any 4wd gears. All the other functions like diff lock etc show up correct on the lights. Only normal driving where there should be 4 lights on only 3 light up.
Thanks

putting in a pop up monitor there and i need to figure out how to disengage it.

Just wondering how old that sticker link is the admin put up, because it goes straight to a Hyundai (pronounced yunday) and have just updated my own car details.

Kind Regards,

Richard K

Hello. I rebuilt the engine on my 2000 Montero. It has the 3.5L 6G74 SOHC. My timing belt is set up perfectly, however, my ignition timing is 28deg. advanced. My mechanic checked it (for $240) but didn't know what to do. Ignition timing cannot be adjusted supposedly. It is controlled by the sensors on the camshaft and crankshaft. The vehicle runs smooth but when it warms up or is...

is a professional dealer of Original Equipment Manufacturer (OEM) tools for automotive carshops since 1990.

OEMtools we provide are:

European
BMW - GT1, OPPS, SSS
Ferrari/Maserati - SD3, ST5
Fiat/Lancia/Alfa Romeo - Examiner
Land Rover - IDS, T4
Mercedes - Compact 3
Opel - Tech 2
Peugeot - PPS
Citroen...

Hi. I have a 2004 Endeavor. For no apparent reason my radio, dome lights and keyless entry doesn't work. My screen says "Communications Error". I checked the the interior fuse and it seemed fine and the engine campartment fuse has a combined piece wrapped with plastic. Any ideas? Thanks for anyone's help.
Bill

To make a long story short, I had 2 tires changed on my '03 Lancer at Canadian Tire, and there was extensive damage done to my rims. It looks like someone used a tire iron to pry the tires from the rims, chipping the rims all the way around on both tires.

I filed a complaint, and the service manager said that these are rust blisters caused by the Canadian winter and would not...

Hi Guys,

I have 3 of these wheels and I'm looking for a fourth; however, I don't know what kind of wheel it is or what model it came off of. All I do know is it is an Mitsubishi OEM wheel, 17inch. I was told the three i have came off of a 3000GT, but I couldn't find anything on it. Any suggestions?

Thanks.

7094]

hey i just recently started working for twm performance, they make shifters for many different cars and have cheap prices. they make shifters for the honda civics and crx. there customer survice is great. if you have any questions just ask, there website is
twmperformance.com

ps. i hope i didnt break any rules on the forum just trying to help people get decent prices of the...

greetings...im writing from panama because i have a friends who is a racer in my country...he has a mitsu mirage, with and engine using a 4g63 head, plus a 4g64 block, the problems is with the oil pressure drop...can someone explain what is the best tuning for this combo????

default/liebe011.gif' ...

hey,
i have been lookin everywhere for a 1997 mitsibishi legnum bodykit but all i see is galants and evo is there any other names for a legnum?
anybody got any pics of legnums with body kits?