http://rsracing.com/tech-wheel.html default/thumbsup.gif' 'thumbsup.gif' />

I want to lower my car, but I can't decided how I should go about it. I've been talking to my buddy and he says I should just go straight springs. This is because coil overs need to be adjusted for a while until they're right, have a lot more bouncy ride, and can wear out easier, I guess. But my question is this: since I live in Wisconsin, should I use coil overs so that I can raise my...

I have a set of 15" Peter Wherret special rims I don't need anymore. they probably need another polish as they've been sitting around a little while and 2 have got very small scrapes on them
Anyone interested in buying them?

I have a set of 15" Peter Wherret special rims I don't need anymore. they probably need another polish as they've been sitting around a little while and 2 have got very small scrapes on them
Anyone interested in buying them?

I have a set of 15" Peter Wherret special rims I don't need anymore. they probably need another polish as they've been sitting around a little while and 2 have got very small scrapes on them
Anyone interested in buying them?

im having some problems with my eclipse and i can't really tell whats going on. i had a new transmission put in and the owner called and said that my front axle was bad and they had to replace it but soon as i got in the car it made this annoying squeaking noise as it rolled and it gets extremely loud when you turn. for some reason now it starts squeaking when i hit a pot hole or go over a...

ok so i bought this 91 galant GSR...has a fancy shmancy elevtronic controlled suspension, but seems to me its just busted. does anyone here have any experience with it? if so help would be appreciated. right now it just look slike i lowered my car, which really isnt a bad thing i guess, but it rides like hell. every litle bump is a pain. and speed bumps are the bane of my existence...and there are...

Ran across this today.It is a great site that lets your preview rims on just about any car(color /model/year) out there.


http://wheelrack.com

Well i'm planning to upgrade my suspension, I'm not going to lie dont even know where to begin. I have tried to find some info on the web but no luck. If anyone knows whats hot and if any pictures this would help thanks a bunch. default/beer.gif' 'beer.gif' />

Hi, all

I just found (actually the guy in discount-tire found) that two of my 2000 GT stock rims were bent inside part in this morning when i went there for tire balancing.

OMG..
Michigan road is pretty bad.. or stock rims are so weak..
I already got two vent rims before, so i changed two times each summer ('06, '07)

Now,, two rims are bent at the...

Hey guys. I own a 94 pajero swb and wanna upgrade the current rubber along with adding some ride height. Any one know what the max size I could fit on it without doing any suspension work. Thanks for any input.

Robert

hey i bought a rear sway bar off of a turbo model and want to know what i need to do to put it on my '98 RS eclipse. also how do i replace the end links and where can i get them? thanx y'all

I recently purchased a '98 eclipse RS for a VERY good amount of money. So far, I have an Injen Cold air intake, Greddy Exhaust, Greddy Shiftknob & header. Since it is a 420 a engine only a V4, i want to get a new engine (possibly turbo), but I want a good quality and performance. So any suggestions? I am also looking for good suspension and a good brand for my interior (the previous owner...

Just want to know if anyone has these Rims on there Eclipse
Planning on getting some rims soon, and was wanting what would look the best
for my Application default/banana.gif' 'banana.gif' /> The first 2 are Azul, Speed 7, 17's both in gloss black and HB,
the 3 after...

I don't know if anyone realized or not but Discount Tire has joined our site.


I personally have bought all of my tires from them and have ALWAYS been happy with their customer service.

Welcome aboard Discount Tire!


~Eric

I have been looking for a full coilover suspension for my 93 diamante but have found it extreamly hard to find performance parts. if someone could point me in the right direction that would be great.

Hey,

I am looking at a set of new 18's for my Lancer SE. 5/114.3 bolt pattern, 47mm offset. 18x7.5 size.

Rubber that I want is slightly wider ( 225/45/18 ) than the stock GTS tire (which is 215/45/18 ). Works out to about 1% difference on the speedo.

Am I going to have any rubbing issues, or am I good to go??!?!?

BTW - car is stock...

After a good heavy rain have a loud rubbing/grinding/flopping (almost sounds like a flat tire) noise coming from the rear - sounds like the driver side. Not when accelerating or in reverse, only in first gear and only when reducing speed to first gear. Once dry, noise stops. Any comments/suggestions/experiences with this problem?

i heard that if you lowered the car, it's best to change the suspension. because if the stock suspension is use with a lowered spring, it will damage the suspension in a year time, is it true? default/wacko.gif' 'wacko.gif' />

can someone tell me the correct bolt pattern for my 93 eclipse

i have read 2 different things one 5 x 114 and the other 5 x 110

just need to make sure so i can find me some rims

Whats up guys...I am new to the site and I have a 2003 Mitsubishi Galant ES, and Im interested in ordering some rims within the next couple of days, but I have some questions..... I want 18" Rims with 8" width...will that fit the bolt pattern is 5x114.3 and the offset is +40mm.....I am really not too familar with all of this and just need some insight THANKS!!

Haven't been on in a while, but take a look

I want to change the rims on my 1999 Mitsubishi Carisma. The current tire size is 185/65 R14. I am thinking about buying 15" rims instead (I am not sure what tire size is yet).

The question is, will the performance of the car be effected knowing that the car motor is a 1.6L one? I am buying them off of someone who bought them for his 1.3L car. He said that his car became really...

I am looking at snagging a set of Enkei LM1s for my Lancer, but I need someone with a set to find something out for me. I need to know how flat it is on the surface of the spokes. I know its a little wierd but I own a CNC Mill and plan to mill into the rims with some designs a friend made for me and I need a good flat surface to mill onto. So hopefully someone could help or know of some other rims...

Hey,
You guys with the 08-09 GTS Lancer, whenever you get new rims, give me a shout, I want the stock GTS Rims.

Okay so i have a chance to get a set of 350z rims for cheap(200) in really good shape. the mitsu factory rims if i am correct are 16x7 and the 350z rims are 18x8 will they rub?

hey ppl I want to buy 3000gt vr4 rims if ne1 noes or has them hit me up on my sn braindedracr7506 or pm me. 1

hey ppl I want to buy 3000gt vr4 rims if ne1 noes or has them hit me up on my sn braindedracr7506 or pm me. 1

**Sorry about the title, I meant to say "Changed front brakes, now brake light is on" **

Hello. I am new here, but not to cars. I was changing the front disc brakes on my wifes 06' Lancer ES today, everything went great, bled them then got back in the car to test em. They work fine, they stop default/' ...

Hi,

Looking some TPMS tools suggestion to reset
the sensors during seasonal switch over.
I got 2 sets of wheel, both with sensors.Nor everytime
I swtiching over I need to go back to dealer to get them reset.
I knew I need TPMS handheld to activate the sensors.
Grateful if someone could tell me how to reset the ECM warning
light and learn the new set of...

hey all... i really need to know the offset on the Oz Racing wheels that came on the lancer velocity models...

cheers all 4 your help

Hi there. Is there anyone that can help me with a prob that I have on my '04 shogun elegance. I have a prob with the steering on the car witch seems to pull to the left while driving and also feels very jerky and unstable. I have been to the main dealer but they say that nothing is abnormal at all with the steering suspension roll bar etc. Anyone shed any light on this issue????????

I'm looking at getting some Toyo Proxes 4's for this summer but everywhere I look they're really expensive. My buddy got new tires for about $60 bucks each last summer, a total of $300 including shipping, but he cant remember the website he got them from. Does anyone know of a website where I can get my tires for really cheap, or at least a good reduced price? I'm in...

I got brand new Alloys hyperblack w/ chrome lips 18" for sale , im selling it for very cheap, genuine buyers hit me up and i'll email u the pics . thnx

Hi Can anyone assist me in fixing a lower than low verada I replaced the component in the boot nothing the car started with front end down then the back last is this the sensors and if so how to check maybe the compressor not working anyway any idea would be nice

THANKYOU default/beer.gif' ...

I need to know what type of Konig Rims these are. There 7 spoke black and silver 17's thats about all I know, Any help I would greatly appreciate thank you

I have a set of 17x8.5, 6 spoke rims from a 3000gt. Will they fit on my 1999 Eclipse with or without spacers? If they won't fit I need to sell them.

Thanks, for any assistance.

Does anyone no of a site or some place in texas that carry's 2001 Eclipse Sub Frame, with all bushing's and what not thank you

I let a friend drive my car and he bent alot of *** by hitting the curb, He is helping me pay for the stuff he bent all except for the rims...I was planing on getting new ones anyways... I just have a question, does anyone know of a site with good prices and warranties on there tires i.e. if I get a flat would they replace them, and also what are some good one that you think would look good on...

have anyone here done a disc brake conversion to the rear brake of a 2001 lancer sedan ? or does anyone know of a place to do it ?

Just wanting to know how low would you be able to drop a G3 Spyder 01 GT with a set of 17's, without any rubbing or what not? Thank You

Just want to know what it is and what offset could you go to?

Like the title reads i want to lower my car but can't find a good company that i know of that carries springs for my car. I was curious other model are interchangable or what i prefer eibach or tein but neither of those companies offer lowering springs for my model.

Steph.

hi, new to forum, second post today.

have '95 eclipse rs, upgraded 14" steel rims to '01 style 10 spoke, liked the look and wanted 16's.

noticed that one of my wheels has a cracked spoke. does anyone know if and/or where i can get this repaired? i can find one to replace it but i was quoted $125 and i only paid $200 for the set.

the engine is a 4G93 and it's really old. i don't have the owner's manual and nothing is really shouting brake fluid at me so help.

thanks

I have a 1998 eclipse rs, and I need to replace all 4 of the strut mounts. Every time I search for the parts at different parts places I can find the parts but two different types pop up, a 4 piece mount and a 1 piece mount. I was wondering if anybody knows what the difference between the two are? Is the 1 piece just a pre-assembled unit? And will it work on my car?

HI, i recently Got Some 17" Alloys for my 96 colt, and it just generally vibrates sometimes when driving? any ideas on why this might happen?

Just thought i should mention the drum brake screws on a colt are NOT countersunk.

Therefore i had to buy new screws and sand them down to smooth the wheel face flat, otherwise the wheel would be angled when it went on, im not sure...

Hello,

i have a 03 CG -LS lancer and wondering if the 03 VRX CG stock suspension will fit?

thanks

Hi, do you known which is the precise offset on a Eclipse GS-T 96?
, this car have a 205/55 R16 rims 16x6” 6jj 5x114.3mm (5x4.5”),
The offset are within 35 – 45mm

I want to fit a 245/40 R17 on 17x8.5”, and the offset?

Thanks,

I was hoping that someone out their could recommend a decent set of front and rear strut mounts for a 1998 eclipse rs.