 |
|
|
0 |
EMC 3000gt |
1,521 |
17th September 2007 - 11:42 PM
Last post by:
EMC 3000gt |
| Forum Topics |
hey guys beginning to take on a turbo conversion and was looking into the innovative lm-1 does anybody know how good it is or how it works, in the description for it it seems to me like it can control your fuel curve as well as monitor and log it, but its really vague. if anyone can offer any help that would be great.
|
|
|
1 |
apacolypse_d |
14 |
Today, 12:39 AM
Last post by:
EMC 3000gt |
Will the transmission from a DOHC GT fit in a SOHC Stealth? The GT is a 96 and the Stealth is a 94 so they're of the same generation.
|
|
|
4 |
BunnySMG |
28 |
Today, 12:39 AM
Last post by:
EMC 3000gt |
All right guys I have decided that I am going to be joining the FWD TT Crowd. Ill be turning my 3000 GT SL into a 3000GT SLuTT The "u" is for Uber cool default/wink.gif' 'wink.gif' />
I was asked when I made my decision, and well it all happened last week. I stumbled upon...
|
|
|
125 |
EMC 3000gt |
3,397 |
Today, 12:37 AM
Last post by:
EMC 3000gt |
hi, i have a 1990 gto auto non turbo version. it is sticking in top gear and when driven, after a while makes an awful noise like an aircraft taking off. the only way to stop this noise is to come to an almost complete stop then it clunks and is ok again. this happens randomly so is not continuous, however the stuck in top gear is continuous. my partner has stripped and rebuilt the gearbox but has...
|
|
|
0 |
sassiwg |
11 |
Yesterday, 04:13 AM
Last post by:
sassiwg |
I miss my gto with the blisters, so i got another one haha BUT INEED HOOD BLISTERS !! default/' '' />
Or anyone know where I can get them ? I already inquired at kaze aerocraft
|
|
|
6 |
2jz |
56 |
10th October 2008 - 11:09 PM
Last post by:
2jz |
I have a 93 3000gt sl
So I'm heading home last night and I'm stopped at a light. Light turns green and the guy next to me takes off, so I join him. No more than 3 seconds down the road, my rpms drop to zero.. I tap the gas pedal and the rpms jump back up to 2k and then die again. I let the car coast to a stop. During that time I'm looking to see if any lights have popped...
|
|
|
2 |
bluepearlR/T |
46 |
10th October 2008 - 03:05 PM
Last post by:
bluepearlR/T |
year: 1994
make: Mitsuibuishi
model: 3000 GT
mileage:174,000 original
trans type: Manual
recent maintenance:????
recent modifications:????
other modifications:???
Hey guys excuse my "NOOB" questions...but I need help with quite a few things...
I just picked up a 1994 3000 Gt on a trade.. and ive always wanted one of these...
|
|
|
7 |
xsputnikx |
70 |
9th October 2008 - 08:10 PM
Last post by:
EMC 3000gt |
I am parting out a 1992 Dodge Stealth ES .Only thing wrong with the car was it needed Valve stem Seals.It drove very good except for smoking bad when you stopped .Bought it for parts for my son's stealth. Got what he needed so the rest is for sale.
Let me know if you need anything.pic below is the car
i158.photobucket.com/albums/t98/badhabit1955/stealth1.jpg'...
|
|
|
2 |
BadHabit |
46 |
9th October 2008 - 03:48 PM
Last post by:
BadHabit |
yeah yeah, its not in the market place, but since most people that go in there are for DSM's i put it here.
i need a set of black leather good to great conditino seats for my 3000GT. NON power. i will either pay cash or trade a set of nearly new but partialy worn black leather racings seats with harnesses and mounting brackets.
|
|
|
0 |
Lewiman06 |
11 |
9th October 2008 - 01:51 PM
Last post by:
Lewiman06 |
94 Dodge Stealth drivers side window stopped working with no warning. Pasenger side works. Have +/- 12VDC depending on switch position at plug to motor. Replaced motor assebly. Same problem. Can operate old and new motor from seperate 12VDC power supply. Replaced both motor and door side of plug to motor. Switch seems to work as I have power to motor plug (door side). I don't think its a...
|
|
|
6 |
TCole |
59 |
8th October 2008 - 01:20 PM
Last post by:
enigma48 |
I picked up a project car Friday night. 1993 3000GT base – manual transmission.
The guy I bought it from said the starter wouldn’t turn the engine over, but he could bump start it and it ran great. He wanted too much for it, so I told him I’d get back to him. So I called him back last Thursday, and he said he was bringing the car to get crushed on Friday because he was driving it...
|
|
|
43 |
anyadang |
539 |
8th October 2008 - 11:21 AM
Last post by:
anyadang |
Is 4300 good price for a 92 vr-4 with 162000 miles
|
|
|
5 |
N1GHTHAWK |
77 |
6th October 2008 - 01:29 PM
Last post by:
girly vr-4 |
Hi all, I just purchased a '95 3000gt from a friend. The gas gauge does not work though. My friend said that when it rained hard one day it suddenly worked but the next day it was not working again. He said he thinks it is a bad ground wire in the rear of the car. I have not getten to look at the problem yet but I was looking for some suggestions from people who know more about these cars than...
|
|
|
5 |
cdm1390 |
83 |
5th October 2008 - 09:26 PM
Last post by:
cdm1390 |
Hey everyone,
Well Iv Been trying to sell my gt, but i hate selling cars when i know theres something wrong with it,Everytime i fix something,something else go's wrong,Its never ending with my car, Today my cars ticking and it sounds pretty bad,Also now my power window wont go up on the right side.I took a fast vid on my engine
Thank you,...
|
|
|
7 |
boom8596 |
100 |
5th October 2008 - 01:58 AM
Last post by:
BlinkRA182 |
Okay, I'm new to the site, and I don't really know anything about timing belts and anything along those lines... However my step-dad does, and it's his car. All I need to know is what number should the timing marker be aligned with? It says T-10-20; what should the notch line up with?
It's a 1993 non-turbo import. Any help would be appreciated. Thanks, Matt
|
|
|
4 |
account500 |
55 |
4th October 2008 - 11:03 PM
Last post by:
EMC 3000gt |
i am having problems with my cruse controll on my 1993 gto. the cruise light on the dash lights up when the paddle is pulled but the cruise dosent seam to work can any one shed some light on this.
the firstt of many questions i think !!
thanks all bubbs. default/' ...
|
|
|
2 |
bubbs |
47 |
4th October 2008 - 06:53 AM
Last post by:
bubbs |
Hi all, from previous posts it now seems my power door locking is starting to fail. When you turn the key sometimes to unlock it begins to issue a switching or knocking sound. One fix seems to be to take out the mechanism and add in a piece of rubber which may have failed.
My question is then how does the door moulding come off. I haven't looked closely but there appears to be some...
|
 |
|
2 |
aussieranger |
44 |
3rd October 2008 - 05:44 AM
Last post by:
aussieranger |
i108.photobucket.com/albums/n26/luca_0008/blackgto.jpg' />
black on blue advans, best possible look just missing kaze hood blisters default/' '' />
...
|
|
|
23 |
2jz |
297 |
2nd October 2008 - 11:53 PM
Last post by:
BlinkRA182 |
Hey there I trying to find out if I can convert my front wheel drive 3000gt base model into a rear wheel drive. I want to use my 3000gt for drifting events. Thats why I really want to do this and i've heard rwd gto's. So any help? I will appreciated thanks.
|
|
|
11 |
suprafast7 |
133 |
2nd October 2008 - 10:39 PM
Last post by:
suprafast7 |
my timing belt tentioner pulley broke and my question is what are the chance that stuff didnt get jacked up? and could i just replace the pulley and reset the timing and have it run?
|
|
|
7 |
jimmy666vr4blk |
66 |
1st October 2008 - 09:38 AM
Last post by:
girly vr-4 |
I got in a car accident and I have no choice now but to part-out the car. Its a 1995 3000GT N/A. If anyone is interested in anything, feel free to ask.
|
|
|
18 |
thisblk |
676 |
30th September 2008 - 12:32 PM
Last post by:
EMC 3000gt |
on that vr4 i put a fmic on it.. aftermarket blowoff and boost controllers. all kinds of fun stuff going on. The problem is that big arse emissions control unit thingamajiger. Think thats the technical term. Lol. I have dealt with many turboed cars b4.. but i think that module is couasing loss of power. I want to remove it and was wondering if anyone has experience and can give some tips. Didnt...
|
|
|
6 |
amigoin |
70 |
29th September 2008 - 11:52 PM
Last post by:
EMC 3000gt |
Does anyone know how to change them or have a guide? cause its a lot harder then it looks..
1. Even after applying alot of WD-40 and deep creep the nut and the sway bar spin at the same time...
2. is there a certain position that your sway bar itself should be at to make it easier? Are the sway bar link ends suppose to be streight when your taking them off ?
|
|
|
0 |
2jz |
33 |
28th September 2008 - 07:56 PM
Last post by:
2jz |
I have a 92SL and my headlights suck..
if its pitch black my headlights will light up about 10ft in front of me and thats it.
in other words, if something is in the middle of the road.. im gonna hit it..
(lets hope its not a person)
i was wondering if there is any brand out there that is really good..
since i have flip ups, i have to replace the whole headlamp, not just...
|
|
|
2 |
Mitsu4Life |
53 |
28th September 2008 - 07:24 PM
Last post by:
EMC 3000gt |
I'm about to replace my stock exhaust system on my 92 vr4 and I am currently looking at the tanabe exhaust concept g blue. Does anyone know anything about this?
I recently read a review which said:
"The only drawback in this system is it comes with a “test pipe” which is a straight pipe that goes where the factory catalytic converter goes. You have a few options with...
|
|
|
1 |
blink101 |
53 |
27th September 2008 - 11:57 PM
Last post by:
BlinkRA182 |
Hi Guys 2nd time back! First time round you guys were a huge help! so please again!
1992 - Z16A - Mitsi GTO
I had a problem with Valve Stem Seals so pulled heads out changed over problem fixed! bathed the heads in a acid bath and cleaned up all the lifters and now this car purrrrs!
About 4-5 months after doing this the car has just decided to...
|
|
|
12 |
jhaletama |
209 |
27th September 2008 - 01:52 AM
Last post by:
jhaletama |
On my 95 3000gt when I shift into 4th gear the transmission pops out of gear unless I hold the clutch and wait for the rpms to drop. I heard this is a common problem with the 3000gt's and I've looked through tons of forums for a cause but couldn't find anything so does anyone know what causes this and any possible ways to fix it?
Any suggestions would be great, and sorry if...
|
|
|
8 |
cdm1390 |
103 |
26th September 2008 - 11:01 AM
Last post by:
Lewiman06 |
It's been 12 hours and I already want another one.......
don't think i'll be able to find the kaze hood blisters ever again...
i108.photobucket.com/albums/n26/luca_0008/oddhood.jpg' />
|
|
|
11 |
2jz |
116 |
26th September 2008 - 09:45 AM
Last post by:
GTO Scotty |
Hi all,
I do not know about uz.... but i love crystal lights.
now this is a really easy job and not too expensive either.
first things first.
You need new Crystal Lamps.
so go onto ebay and order yourself a set of "4x6 Projector Lamps" <----(Search for this) on ebay.
once you have them follow the instructions till step 6....
|
|
|
3 |
ahsonpasha |
101 |
26th September 2008 - 09:44 AM
Last post by:
EMC 3000gt |
Hi, can any 1 help? i own a1990 GTO t/t and it's starting to do my head in, it squeaks on the front drivers side wheel and shakes its self to bits on hard braking?????
|
 |
|
4 |
Del3000 |
66 |
26th September 2008 - 09:35 AM
Last post by:
EMC 3000gt |
hi. im new here and hoping someone can help me out. I have a transmission leak. It would leak when the car is jacked up on the drivers side to do a oil change. I would see oil leaking from where the drivers axle seal is. I've changed the axle seal twice but it is still leaking. Theres a little play of the driver axle. Its bent a little. I was thinking of changing the axle but not sure if i can...
|
|
|
10 |
M3KGT |
303 |
25th September 2008 - 03:55 PM
Last post by:
M3KGT |
Hey I'm new to the Mitsubishi world. And actually new to driving even though I'm 25. I know how to make minor repairs and I know I could buy the manual but I'm kinda poor while waiting to finish paying.
So here it is.
1995
Mitsubishi
3000gt SL
126,000 miles
3.0 L DOHC 24-valve V6
I was wondering if anybody knew which pulley has the...
|
|
|
4 |
tomheat19 |
59 |
25th September 2008 - 12:31 PM
Last post by:
EMC 3000gt |
I’m always careful with my nuts, as I’m sure all you guys are. So how could this happen? Well, I let someone else handle my nuts, and I didn’t thoroughly inspect them afterward. So, if you let anyone mess with your nuts, be sure to check them afterward.
On the way home yesterday I thought something was completely falling apart in my front transaxle. First there was a clicking,...
|
|
|
4 |
anyadang |
90 |
25th September 2008 - 08:38 AM
Last post by:
anyadang |
Hi guys, I may have already asked this question, but it may have been on a different forum, I can't really remember. The search wasn't working so I couldn't really check. Either way, I didn't get an answer before, so sorry if I am asking again. Anyways, does anybody know how to replace the fog light bulb on a 1995 3000GT VR-4? Thanks.
|
|
|
3 |
hb5000 |
440 |
23rd September 2008 - 02:15 PM
Last post by:
ahsonpasha |
I have a light that keeps coming on in my 92 R/T. its all the way to the right at the bottom of the gauge cluster. Its orange and kinda has lines in it. I know this seems like a really stupid question, but I just want to make sure everything is ok. It usually comes on when the car is still cold, but wont go off till I get after it a little bit. Sometimes it comes on when im driving at 1500-2500rpm...
|
|
|
1 |
cjsavage90 |
57 |
23rd September 2008 - 10:17 AM
Last post by:
EMC 3000gt |
hey guys there's some update pics from the race car
mustangmods.com/ims/u/4152/12805/248474.jpg' />
mustangmods.com/ims/u/4152/12805/248475.jpg' />
mustangmods.com/ims/u/4152/12805/248483.jpg' ...
|
|
|
32 |
fastnelson |
899 |
22nd September 2008 - 04:22 AM
Last post by:
GTO Scotty |
if anyone is interested I am making a run of solid lower engine mounts, basically they are stock size mounts with steel sides, no flex and they outlast the car
|
|
|
2 |
toddrs93 |
55 |
22nd September 2008 - 12:36 AM
Last post by:
toddrs93 |
I found it in another forum under the RICER patrol thread
|
|
|
10 |
wickedz |
200 |
21st September 2008 - 12:36 PM
Last post by:
EMC 3000gt |
Hi all, recently I had a problem with my 92 GTO when the seal between the y pipe and the throttle body cracked and was sucked into it causing my throttle to stick. Ok to fix this I installed a silicon seal over both parts rather than one inside. All good I think.
At the same time I asked on this forum where the tube went to from the outlet on the upper end and side of the y pipe (the...
|
|
|
6 |
aussieranger |
100 |
19th September 2008 - 03:09 PM
Last post by:
militaryman108 |
trust turbine kit tuned to 600 hp, what questions shoul I ask the supplier
has 850 injectors thats pretty much all i know.
|
|
|
1 |
2jz |
93 |
17th September 2008 - 03:21 PM
Last post by:
girly vr-4 |
here is the story...i was driving my stealth, when in 1st there was a big bang and almost as if somthing dropped from the engine..i was able to get to a parking lot to check it out , nothing visable . on my way home i was slowly losing power to the point where it came to a complete stop. blahhhhhh...ok so now its starts up fine, shifts fine but it wont move, and im getting a spinning howling...
|
|
|
5 |
dark_stealth |
122 |
16th September 2008 - 07:29 PM
Last post by:
dark_stealth |
Hello Everyone,
My Car: 1992 Mitsubishi 3000gt SL
Issue: Car will not start without popping clutch. For the longest time I would just unplug the battery cables every time I stopped and turned the car off. Then when I got ready to leave, I would plug the cables and it would start, but sluggish start. Now, I unplug and plug the cables, but the car still won't start until I...
|
|
|
21 |
Eggcellent |
173 |
16th September 2008 - 05:59 PM
Last post by:
EMC 3000gt |
at first my back wipers were not working.. checked the fuses.. all was well so i pulled out the INT button and saw that it wasnt even connected.. so i plugged it back in.. then i realised that when its plugged in the back wipers keep on going even if i dont press down the button.. and when i do press it down u can hear the pump tryna spray the water but nothing comes out, even tho its topped up.....
|
|
|
5 |
