it`s starts verry well when is warm but in the cold mornings is verry hard to start it !
does enyone know the problem ? , mitsubishi mechanics can`t find it or.... they don`t whant to admit a problem. spark and batery checked !
 |
|
|
7 |
tintin |
909 |
Yesterday, 08:34 PM
Last post by:
shanty |
Hello Everyone,
My 2004 4Life starts perfectly from cold but will not start when hot. Have to leave it to cool before it will run. Not overheating and runs fine.
I'm a farmer not a mechanic but is there anything simple for me to try before going the the garage?
Any help appreciated.
 |
|
|
3 |
farmerjon |
21 |
Yesterday, 03:22 PM
Last post by:
erne |
I'm new with any vehicles. This is a 1991 Mighty Max problem.
This only started today when driving around:
I don't actually have a tachometer but it seems when I'm stopped, idling or going slow (low RPM), the Brake Light, Battery Light, and Maint Req'd light are lit, and a slightly dimmer than full brightness.
As I speed up or go higher in RPM, the lights...
 |
|
|
3 |
Dvkris |
93 |
6th July 2008 - 11:57 AM
Last post by:
Taquan |
Hello Everyone,
I've got a 1991 Mighty Max pickup. Yesterday the horn starts honking - well, more like little toots. I got a lot of looks yesterday in traffic. default/laughing.gif' 'laughing.gif' /> And in today's world of 'Road Rage' you definitely...
 |
|
|
1 |
Buddy Love |
258 |
2nd July 2008 - 04:46 PM
Last post by:
kylem |
Hey wassup fellow Mitsubishians,
I ran into a problem with my MMax. I replaced the clutch on my 5 speed manual and when I tried to shift gears they would not go in and in the same process I managed to literally brake the Stickshift from the bolts. Is there any possible solution to this or should I just totally replace my tranny. I have been considering converting my MMax to an Auto...
 |
|
|
5 |
fat2000 |
154 |
2nd July 2008 - 04:30 AM
Last post by:
ramrick |
an anybody tell me how big I can go on a 2002 Triton for wheels and tyres without hitting when I turn, cheers Jetpilot
 |
|
|
3 |
jetpilot1 |
32 |
1st July 2008 - 02:12 PM
Last post by:
KiT TeUnG 2549 |
I have a 1989 dodge ram d50 4wd and am thinking about beefing up from the 2.6l to something with a bit more kick. I was thinking about swapping up to a v6 possibly from a bit of a performance car.
I am curious if anyone knows what other engines share the bell housing dimensions with the 4x4 max.
I like this little truck, but sometimes find that the kid in me discovers a lack of...
 |
|
|
0 |
ramrick |
46 |
1st July 2008 - 05:31 AM
Last post by:
ramrick |
My 1986 Mighty Max's door seals are shot and it started to let rainwater into the cab. Now my interior door panels are rotted from the rainwater. Does anyone know of a supplier that sells replacement interior parts for the Mighty Max? I also need replacement door seals and door window rubber seals.
Thanks in advance for any help!
 |
|
|
3 |
dathing |
214 |
1st July 2008 - 03:46 AM
Last post by:
ramrick |
Recommendations for Triton L200 3.2 L Diesel Dual Cab A/T performance chip?
Where can I buy?
Thanks! default/' '' />
 |
|
|
17 |
bobeadle |
155 |
30th June 2008 - 12:01 PM
Last post by:
KiT TeUnG 2549 |
Please does anyone have Mitsubishi L200 1995 electric manual? thanks
bhd
 |
|
|
0 |
bhd |
51 |
27th June 2008 - 03:22 PM
Last post by:
bhd |
Hi ive recently purchased a keyless entry system for my 05 l200 warrior.
having a nightmare as i cannot find where to tap into cables, cant get near fusebox as it is tucked away beneath dash so wondering if any of you had done it before and could give some much needed advice, also if anyone has a copy of a wiring diagram or something it could greatly help
thanks liam pickett...
 |
|
|
3 |
liam1903 |
339 |
27th June 2008 - 01:50 PM
Last post by:
Beano |
Hello,
Anyone familiar with 2007 L200? (aka Triton). I was wondering if i can replace the standard Interface (small one) with a 2 din multimedia device (japan made, so a litle bit smaller than 2 din), which includes touch screen, gps, etc. Maybe one of you knows how to remove the cover of the standard interface.
THX
 |
|
|
3 |
dj_lex |
205 |
24th June 2008 - 07:12 PM
Last post by:
ffbros |
new to this posted it once but on welcom page so will try here,cat has gone on my L200 have been told by exhaust garage to bypass,asked the teting station they said no probs with emissions but just worried it willscrew with my ecu any one know if it will or wont!
 |
|
|
2 |
merlin22 |
36 |
24th June 2008 - 12:10 PM
Last post by:
KiT TeUnG 2549 |
i have a 98 triton 2.8 non turbo, can i fit a turbo from a delica to it?
 |
|
|
0 |
kaino |
55 |
14th June 2008 - 06:27 AM
Last post by:
kaino |
Hi, I've got a L200 Warrior (2005), a fuse has blown that control the meter (dash board), Temp Guarge, Thermometer. I've changed the fuse with a new one, but this has blown too, has anyone had any experience of this or could recommend a solution? Also, if anyone has had a dealer or garage repair this problem how much did it cost? Failing this, do you know where I can get a wiring...
 |
|
|
1 |
TMAChris |
78 |
11th June 2008 - 11:27 PM
Last post by:
KiT TeUnG 2549 |
Hey guys, i'm new to the forum, but need some help.. well, more advice
I have a 1986 L200 single cab ute, and am about to give the engine an overhaul. I'm going to do the cambelt, tensioners, idlers, balance belts, headgasket, waterpump etc, but am wondering if there is anything else i should do while i've got the thing in pieces.
Also, while i'm writing,...
 |
|
|
1 |
ThatGuy95 |
130 |
3rd June 2008 - 10:39 AM
Last post by:
chain rattle |
hey all i have just pulled out the engine of my MK 1999 V6 3ltr Petrol triton 4x4 dual cab to find the oil leak i was wondering if there are any points i should look at that have more prone to oil leaks problems than the rest
i personally think its some where near the sump but im hoping is not the front main seal any light on the subject would be much appreciated. and is the any where i can...
 |
|
|
2 |
Dink |
82 |
1st June 2008 - 09:06 PM
Last post by:
Dink |
Just bought a 2001 Triton, and want to fit a new stereo
Does anyone know how to remove the original Kenwood Radio
Cheers Gray
 |
|
|
0 |
graybeck |
81 |
31st May 2008 - 09:47 AM
Last post by:
graybeck |
Hi, New to this forum,
Just wanted to know what type of alarm is fitted to my L200 Elegance 56 model?
Preferably after the make and model to get insurance satisfied that its a Cat 1 Thatcham alarm system!?
Thanks,
JAson
 |
|
|
3 |
Jaceace |
99 |
28th May 2008 - 05:34 PM
Last post by:
zipmatic |
(sorry for my english, it's not my native)
Hi,
Where can I find (any?) information about Ralliart powerbox for my Triton?
Local Mitsubishi dealers can't tell and they do not want to deal with it for
unknown reason. I can buy it by myself, but can it be installed by myself?
Or is it require some special programming?
Thanks in advance for any...
 |
|
|
4 |
fundamental |
279 |
26th May 2008 - 10:01 PM
Last post by:
KiT TeUnG 2549 |
Guys, i have almost 200,000 km. The engine is blowing some smoke and been told the valve seals need replacing. The car has been running on LPG for almost 10 yrs. The idea of an engine swap has crossed my mind. Something wth more power. I havent heard of an engine swap in a triton, but what would fit and how difficult is a job like this to do?
 |
|
|
7 |
frankloschiavo |
815 |
22nd May 2008 - 11:40 AM
Last post by:
KiT TeUnG 2549 |
Please Help if you can... 2006 L200 2litre DiD Diesel, just had it serviced & EGR valve replaced as check light was on, dealer carried out Knock software recall/update apparently???, after leaving dealer i could feel a slight instant power shut down on some light load/throttle applications, drove for a week, problem still there, took back to dealer and explained, checked ecu for errors, no...
 |
|
|
1 |
mitsubwarrior |
209 |
18th May 2008 - 09:21 AM
Last post by:
hutchi |
Hi , my L200 got water loosing , but no over heat .( temp. meter show normal )
When i drive short distance there is not really a problem , but if i drive more than 200km , i need to feel in at least 1L water.
ive change rad. cap , water pump , fan oil , rad. clean .
I wonder what problem ?
EGR coolent ? EGR ? head gasket / crack ?
can...
 |
 |
|
6 |
midnightstar |
291 |
18th May 2008 - 09:15 AM
Last post by:
hutchi |
hi all i have a 93 triton with the 2.6 petrol 4
and it is getting a bit ratly in the top end i was wondering if they have adjustable valve clearanceif so can some one tel me what they are thanx
 |
|
|
2 |
mighty tritie |
87 |
18th May 2008 - 01:18 AM
Last post by:
mighty tritie |
HI there,
I have a 2005 2.8l diesel L200 originally from Thailand. I was thinking about running it on a 50% mix of veg oil and ofcourse paying the necessary duty!! I was wondering if anyone else had tried this or had any advice on the matter. Will it still start ok in cold weather? Is there any long term problems?
Many thanks.
Regards.
Ross.
 |
|
|
1 |
rosco pico train |
168 |
16th May 2008 - 10:14 PM
Last post by:
_C_ |
Hello
how is every body here, a cool forum i am looking some good side steps for my single cabin L200, i have a budget around 350$. come on with ur suggestions.
 |
|
|
2 |
bingbang |
1,018 |
16th May 2008 - 09:27 PM
Last post by:
_C_ |
Hi all, first post here, hoping I'm in the right spot.
Wondering if anyone has added extra speakers to the 2003 GLX Triton. I have the two dash-mounteds and the front and rear door fabs have the shrouds ready to go for extras but pulled out half the dash to see if it could be done before giving up. If anyone knows if it's possible (and a difficulty rating) I'll give it a...
 |
|
|
2 |
speedracer |
274 |
16th May 2008 - 09:19 PM
Last post by:
_C_ |
hi, does anyone know why the increase in torque is about 20% less on the auto than the manual with one of these upgrades fitted?also does anyone have a new shape l200 auto with power upgrade fitted if so what is the improvement to the acceleration?thanks
 |
|
|
1 |
y601ldg |
1,126 |
16th May 2008 - 09:07 PM
Last post by:
_C_ |
Does anyone have Mitsubishi L200 1998 – 2002 Workshop manuals CD-Rom ?
or can you tell me where can I download from internet?
Thank you
 |
|
|
3 |
noklik |
1,256 |
15th May 2008 - 08:27 PM
Last post by:
ulyto_jun24 |
default/liebe011.gif' 'liebe011.gif' /> Have just bought 2001 L200 4Life 4x4, but cant find any kind of service schedule. Any ideas where I can get one? There is no in workshop manual.
 |
|
|
0 |
alan1955 |
135 |
14th May 2008 - 04:10 PM
Last post by:
alan1955 |
Hello All,
I'm trying to remove the door trim to work on my door handle of a 1989 Might Max. The handle will not work from the outside.
1. How do you remove the window crank?
2. Any suggestions on working on the door?
Thanks,
Mitch
 |
|
|
1 |
mglredsfan |
113 |
8th May 2008 - 08:09 AM
Last post by:
stilux |
Howdy people,
can anyone relate their direct (not guess work please )experiences and methodology for the above task ?
I wish to put speakers in the blank area in the lower doors. In particular is the trim one piece, is the manual window winder held on by a wire retaining clip like other makes.
Will 6 or 6.5 inch speakers fit OK- without butchering trim...
 |
|
|
1 |
Groucho |
180 |
8th May 2008 - 07:55 AM
Last post by:
stilux |
Hi I can't start my L200 Diesel unless I bump start it.
I turn the key and there's just a clicking sound, so I have cleaned the battery terminals and taken it for a long run but the starter motor will not turn, something under the bonnet just clicks when I turn the key???
Does anyone know what could be wrong?
 |
|
|
2 |
CyprusL200 |
156 |
8th May 2008 - 07:43 AM
Last post by:
stilux |
Just having trouble finding a LSD for my Ex Lancer Turbo...
Visited a Wreaker in hamilton ...took away 3 different sizes of L200 diff heads to see which one fitted ...i can't tell you the sizes but the middle size fitted out of the three ...but trying to find a LSD is another story altogether ! ...has anyone done this ..knows what sizes there are ? and what models have lsd's...
 |
|
|
2 |
sjacs |
880 |
6th May 2008 - 08:10 PM
Last post by:
hr mod |
I was wondering if you could possibly give me some advice, I have a 2005 Mitsubishi L200 2.8l diesel originally from Thailand. I only bought it around a month ago and found that when I got it home, there was no heating although the fan was working and the engine temp was normal. I took it back to the garage I purchased it from who fixed it but told me that it didn’t originally have heating as...
 |
 |
|
1 |
rosco pico train |
184 |
27th April 2008 - 06:43 AM
Last post by:
Rob |
Hi all, I am currently working for an aftermarket diagnostics company who are developing new Mitsubishi CAN diagnostics for their tool. I am trying to distinguish between the following L200 variants as displayed on the MUT3 nenu:
L200 (KB#)
L200 (K6#,K7#)
I need to know what these numbers mean to this model? and if this information is shown on the car somewhere? ...
 |
|
|
1 |
ben_wallis |
202 |
25th April 2008 - 04:44 PM
Last post by:
zipmatic |
I just bought a 89 Mighty Max to beat gas prices. It is leaking brake fluid and I can't tell for sure if it's the booster or M/C leaking. Is this a common thing on these pickups ?? Is there somewhere else I should be looking ??? Thanks RW default/unsure.gif' 'unsure.gif' />
 |
|
|
0 |
Inthegarge |
99 |
23rd April 2008 - 04:28 PM
Last post by:
Inthegarge |
Hi all
New here, great forum, but cannot seem to find help with my problem.
I have a 2003 L200 Warrior and the engine warning light has come on. All very bizarre, the manual refers to it on 1 page (but for petrol engines only - mine is diesel) and refers to it on another page for diesels only but doesn't actually go into any detail about what might be wrong with it, just...
 |
|
|
0 |
demonweb |
138 |
21st April 2008 - 12:51 PM
Last post by:
demonweb |
I own a 1983 Dodge Ram 50 sport 4x4. The equivalent is the Mighty Max.( or so i've heard)But when I needed to get new tail light lenses I couldn't find any match. Until I stumbled upon the L 200 of the same year. The lenses are the same and after looking at pics. the whole truck seems the same. So is my truck linked to the L200 or the mighty max. VIN says Ram 50 so I am confused. I now...
 |
|
|
0 |
808trae333 |
145 |
16th April 2008 - 05:51 PM
Last post by:
808trae333 |
does any body know where i can get this for free
 |
|
|
0 |
viikym |
172 |
14th April 2008 - 06:01 AM
Last post by:
viikym |
I have a 2001 L200 animal and my window washers have stopped working properly. The motor is working fine. Taking off the water supply hose reveals a small metal bearing. This bearing falls back, but when washers are operated it is forced back up and blocks the hose totally. Do I need to buy a new washer hose or is there a way this can be fixed? Appreciate anyone's help and advice.
 |
|
|
0 |
shaun newman |
91 |
12th April 2008 - 06:14 AM
Last post by:
shaun newman |
Hi All,
And a big hello to all as I am a new poster default/tongue.gif' 'tongue.gif' /> .
Recently I acquired a canopy for my warrior and have resprayed it, but i cannot seem to find the docking section for my electric loom that is supplied with the top to give it the power...
 |
|
|
0 |
Scott |
83 |
11th April 2008 - 04:56 AM
Last post by:
Scott |
I am interested in changing the factory installed head unit.
However I am concerned with it affecting the display which sits on top the console, that shows, compass, radio station etc.
Can some one offer any guidance on this.
Thank you in advance
 |
|
|
5 |
skyrider |
1,180 |
7th April 2008 - 04:21 PM
Last post by:
zipmatic |
I took the heads to be milled because the person who owned it before me blew the head gaskets. So I pulled the heads and all and i spoke with this reputable machinist supposedly and asked if i should pull the cams and and gears he said" no ...when they are in the top dead center of the compression stroke the valves are out of the way enough to mill them 5 thousands". ok cool....so i take...
 |
|
|
0 |
4g64gs |
86 |
5th April 2008 - 07:06 PM
Last post by:
4g64gs |
Hi,
Ive got an L200 with an engine speed control problem.
No management light is up and the problem is a little intermittent. In summary it will hold the RPM at around 1300 for a period of a 30 before allowing it to drop to normal.
When driving, the truck surges and holds back, as if to say there is a throttle problem.
I am lead to believe possible...
 |
|
|
2 |
L200Robw |
168 |
3rd April 2008 - 03:34 PM
Last post by:
wayne1979 |
Hi there first post out of desperation!!! many thanks for any help in advance.
i've a 2001 L200 with slow starting issues, it starts with a fairly long turnover then chugs away smoking like a good un then clears and runs fine. I've changed the glow plugs and the bar is getting power though only for about 3 seconds and stops once the engine starts. This means it...
 |
|
|
1 |
al4x |
160 |
3rd April 2008 - 03:24 PM
Last post by:
wayne1979 |
HI folks,
anyone got a means to remove or disable the governor on the 07-08 v6? Gets to 180 too easily and then, yes... it cuts ignition... default/blush-anim-cl.gif' 'blush-anim-cl.gif' />
any info could work!
thanks,
s
 |
|
|
0 |
slimV6 |
103 |
2nd April 2008 - 05:03 AM
Last post by:
slimV6 |
Hi wonder if anyone can tell me why i have a green flashing running gear lamp flashing on dash.
 |
|
|
2 |
simon horne |
309 |
2nd April 2008 - 04:53 AM
Last post by:
slimV6 |
so annoyed. heaps of blow by coming out of top breather (into air filter). bit smokey and i hoped a service and new air filter might fix the problem. local guy checked it over and says far too much blowby out of breather and most likely the rings on the way out. truck has heaps of grunt though (no issues going up hills in 5th).. anything else i could be checking out first???? so annoying if...
 |
|
|
2 |
paddyton |
99 |
1st April 2008 - 05:07 AM
Last post by:
paddyton |
|
|