 |
 |
Topic Title |
Replies |
Topic Starter |
Views |
Last Action |
Hi,
Ive got an L200 with an engine speed control problem.
No management light is up and the problem is a little intermittent. In summary it will hold the RPM at around 1300 for a period of a 30 before allowing it to drop to normal.
When driving, the truck surges and holds back, as if to say there is a throttle problem.
I am lead to believe possible...
 |
|
|
2 |
L200Robw |
199 |
3rd April 2008 - 03:34 PM
Last post by:
wayne1979 |
Hi there first post out of desperation!!! many thanks for any help in advance.
i've a 2001 L200 with slow starting issues, it starts with a fairly long turnover then chugs away smoking like a good un then clears and runs fine. I've changed the glow plugs and the bar is getting power though only for about 3 seconds and stops once the engine starts. This means it...
 |
|
|
1 |
al4x |
173 |
3rd April 2008 - 03:24 PM
Last post by:
wayne1979 |
HI folks,
anyone got a means to remove or disable the governor on the 07-08 v6? Gets to 180 too easily and then, yes... it cuts ignition... default/blush-anim-cl.gif' 'blush-anim-cl.gif' />
any info could work!
thanks,
s
 |
|
|
0 |
slimV6 |
131 |
2nd April 2008 - 05:03 AM
Last post by:
slimV6 |
Hi wonder if anyone can tell me why i have a green flashing running gear lamp flashing on dash.
 |
|
|
2 |
simon horne |
326 |
2nd April 2008 - 04:53 AM
Last post by:
slimV6 |
so annoyed. heaps of blow by coming out of top breather (into air filter). bit smokey and i hoped a service and new air filter might fix the problem. local guy checked it over and says far too much blowby out of breather and most likely the rings on the way out. truck has heaps of grunt though (no issues going up hills in 5th).. anything else i could be checking out first???? so annoying if...
 |
|
|
2 |
paddyton |
106 |
1st April 2008 - 05:07 AM
Last post by:
paddyton |
Hi all I have a L200 4d56 turbo diesel with cold starting problems.
When its cold I turn on the key, the battery volts on the gauge go down to 9V and the glow light comes on and there is a click behind the left front guard.
After 9 secs the glow light goes out, but the battery is still at 9V.
After 16 seconds the relay behind the guard clicks off and then the battery...
 |
 |
|
12 |
mattathm |
1,936 |
30th March 2008 - 12:42 AM
Last post by:
paddyton |
Hi Folks,
does anyone know of a place where there is a comprehensive list of recalls and Technical service bulletins available for the 07-08 tritons?
Our ZA guys are a bit slow on the uptake for this kind of thing and we have some questions regarding the vehicle's suspension, computer and steering!
any info would be great! Thanks
s
 |
|
|
1 |
slimV6 |
227 |
22nd March 2008 - 07:31 PM
Last post by:
pickle |
Hi,
Ive got a 2002 L200 Animal. Been a good truck but of late has developed an idle problem, that is intermittent...i think.
Symptoms:
When up to temperature ( and after the heater has been on in he cab to warm my feet) the Idle when in N is about 1200 rpm.
Its done this twice now, after about 30 mins driving, and when i have had the heater on in the...
 |
|
|
0 |
L200Robw |
112 |
20th March 2008 - 02:31 PM
Last post by:
L200Robw |
I have a 91 Triton diesel with a blown gearbox, will a box from a petrol engine fit without any problems. Davo757
 |
 |
|
0 |
Davo757 |
167 |
10th March 2008 - 12:28 AM
Last post by:
Davo757 |
Hi, Does any one know the pump timing on me 04 2.5d L200 warrior, Ive recently fitted a second hand engine and had to swap the pump, now in need some data to re-time correctly. Many thanks Paul
 |
 |
|
6 |
volvoservices |
305 |
2nd March 2008 - 06:33 PM
Last post by:
wayne1979 |
Hi, Does anyone know how to reset the service interval on a 2007 Mitsubishi L 200, automatic with sat nav, the service come up on the sat nav multi function screen ?
Now showing service due in 0 miles or 18 September 2008.
 |
|
|
1 |
dashradio |
488 |
2nd March 2008 - 04:00 PM
Last post by:
wayne1979 |
Hi all, I have a very nice L200 2.5TD. Unfortunately, the fuel tank is leaking and I need a replacement. I've been offered a tank off a 2004 L200. Can anyone say if these tanks are the same?
 |
 |
|
1 |
clarksy |
152 |
2nd March 2008 - 03:48 PM
Last post by:
wayne1979 |
Hey,
Im new to this forum and have only owned my 2002 GLX trition for just over a week now. Im in search for sports bars to fit this fine dual cab. Anyone know where i can pick a second hand set???
Also i am considering getting extractors as well for the V6, is it worth putting them on the car???
Cheers
 |
|
|
0 |
Rodderz |
102 |
2nd March 2008 - 03:19 AM
Last post by:
Rodderz |
I am ordering one Mitsubishi Strada 4x4 M/T 2008 but my sales agent is telling me the waiting list is long, she was instead offering me the 2007 version. The price difference is only P15k but she was insisting that performance-wise they are identical and the only difference are the tire sizes, 17 for the 2008 model while 16 for the 2007. Fellow members please enlighten me on this matter.
 |
|
|
0 |
bojang2008 |
967 |
28th February 2008 - 06:14 AM
Last post by:
bojang2008 |
I just happened across a free 1985 Dodge Ram 50 2WD, same thing as a Mighty Max. I found a sticker identifying the engine as a "G63B," so at least I know what I'm dealing with there. But what I'm not so familiar with is the transmission (an automatic) and rear axle. Did these come in any other vehicles? Any idea how much horsepower these can stand up to?
 |
 |
|
1 |
MadScientistMatt |
260 |
24th February 2008 - 05:21 PM
Last post by:
MadScientistMatt |
Check out mightyd50.com for the biggest online Mighty Max/ Ram50 community. You can probably find any information your looking for by searching or asking in a thread.
 |
|
|
0 |
DroppedMitsu |
178 |
23rd February 2008 - 09:43 PM
Last post by:
DroppedMitsu |
Hey all, new here. Just had a new clutch put in my rig because i was getting some gear clash. Didn't help. I put in a new master cylinder and that helped but the clutch still feels very soft. I'm pretty sure the system is bled well. (i put in dot4, however, not dot3). Any Ideas?
The other problem happened this morning. The hub lock light is staying on. Any way to check...
 |
|
|
0 |
nuge |
112 |
23rd February 2008 - 10:52 AM
Last post by:
nuge |
Hi,
Later in the year, I am looking at buying a 1995-1999 Triton 4 door/4wd. Is there any dangers to these vehicles? How is the fuel economy with the petrol model and the economy of the diesel. I don't really know where to look to find all this information so any info would be greatly appreciated.
 |
|
|
0 |
fedexpope |
137 |
23rd February 2008 - 08:10 AM
Last post by:
fedexpope |
Hi, I have a 1992 4wd 2.5ltr T-Diesel Mitsubishi Triton/L200 and am looking For a service manual or one that at least covers that engine. I have been looking for a while now and would be very grateful if you could help me out. Cheers.
 |
|
|
1 |
leethal |
423 |
19th February 2008 - 12:40 PM
Last post by:
Taquan |
Hi there just wondering if any one can tell me if the L200 ute (84 model) has a negative or positive horn? Strange question i know but i am trying to install a set of air horns and i can't get the darn things working.
 |
|
|
2 |
shorty007 |
214 |
16th February 2008 - 08:05 PM
Last post by:
freakingwilly |
anyone interested in a new set of wheel arches for l200/warrior/outlaw all years i can supply, please pm mike. also i have genuine mitsubishi ralliart grills chrome and black ( can be painted5397]
 |
|
|
1 |
mickyb |
591 |
14th February 2008 - 05:21 AM
Last post by:
Greig |
is it just me or is it really hard to find accessories for the new strada models? i wanted my ride to have more of a jdm look to it but there is really nothing out there for the strada (or here in the philippines at least). i've put on a jdm slanted plate holder but that's prety much it. maybe someone could help me or give me hints of what i could do. thanks!
 |
 |
|
2 |
zhh398 |
1,076 |
13th February 2008 - 09:37 PM
Last post by:
mickyb |
Hi guys can anyone tell me if they have any problems i'm having.
I bought a new l200 elegance in 2006 took out a mitsubishi 3 yr warranty now find that at 36k tha dealership have found or not as the case may be two of the nuts that hold th tappets down.
Warranty at mm say that its a dealer problem but they say they have looked on the web and some sites are posting the same problems....
 |
|
|
1 |
pjseal |
506 |
13th February 2008 - 05:53 PM
Last post by:
zipmatic |
Hi all,
i was wondering if anybody could help me out?
i have a 2004 l200 warrior and last night whilst driving home, as i accelerated the car seemed to start to struggle and kinda like jerking, but then it would be ok and then struggle again. i managed to get home just took it nice and easy now im scared to drive incase i break down.
anybody else had this happen...
 |
|
|
0 |
Nick Winwood |
199 |
10th February 2008 - 06:57 AM
Last post by:
Nick Winwood |
Under 1500 rpm my engine makes a ugly 'tracktor' noise. Over 1500 it's humming nice. I have no smoke , full power, normal fuel consumpion and easy starting....
It started some weeks ago and is getting slowly worse ....
It's a 1999 2.5 TDI L200.
It makes no difference when the engine is hot or cold. I was thinking that the valves need to be set, but when this is the...
 |
|
|
1 |
Taquan |
208 |
30th January 2008 - 07:11 PM
Last post by:
Taquan |
I have a 94 Mighty Max that has been tempermental with the heat/vent. Some days you get in the truck and the blower works great on most days the blower does not work at all. When it doesn't work you can cycle through all of your options and it will still not work. Let it sit for awhile and it will be back to working again. Any ideas?
 |
|
|
1 |
jjfertig |
128 |
28th January 2008 - 05:30 PM
Last post by:
Taquan |
[SIZE=7][COLOR=blue][FONT=Arial]Hi all anybody tell me as to where I can get a lower ratio diff centre to fit 1989 Triton 2wd, current is 4.22 have converted to Buick V6 andT700 Auto box, acceleration is SAVAGE, but am looking for it to be a little more sedate.
The diff required is probably 3.00 to 3.25 need a diff centre which is out of Starwagon etc something compatible to the Triton
 |
 |
|
0 |
DesCasso |
211 |
25th January 2008 - 04:54 AM
Last post by:
DesCasso |
Hi, I wondered if anybody knows the answer to this (as it might save me a lot of money)!
My L200 (2000) needs a new Petrol Tank and as I drive a 2.4 Petrol, which is not very common, I wondered if a Diesel Tank can be used instead? Apparently, a new Tank from Mitsubishi has to be ordered from Japan and costs about $1500 when I go via my local dealer in England.
There...
 |
|
Fuel Tank
any difference between Diesel and Petrol
|
1 |
Dirk |
287 |
25th January 2008 - 04:28 AM
Last post by:
DesCasso |
Hi All,
Just wondering if anyone knows what other Mitsi seats will bolt into my 1983 L200?
Cheers
 |
|
|
0 |
mmp_wa |
112 |
24th January 2008 - 07:13 PM
Last post by:
mmp_wa |
5528]my mighty max has provisions for a oil cooler but I cant find any info on the bottom port I think it is for a bypass valve. any info or a part # would be great
 |
|
|
5 |
kylezx10 |
161 |
22nd January 2008 - 07:26 PM
Last post by:
Benckj |
hi, I had a leeking head gasket on my 6G72 engine, so I stripped it and removed the heads.
I found that water was leeking in to # 4 cylinder, the only signs I had earlier was that the colant was dissapearing without any sign of a leek.
There was no sign of water in the oil.
So I had the heads serviced, valves reseated, the lash adjusters replaced, head shaved, and checked.
I...
 |
|
|
1 |
94vr6 |
102 |
19th January 2008 - 11:15 PM
Last post by:
chain rattle |
I've got my test coming up soon and I'm looking for a car. Found a 91 Triton MH club cab that looks pretty good. I was just wondering if anyone has any opinions or advice?? Thanks.
Here's the link - ...
 |
|
|
0 |
rugbymatt_07 |
104 |
16th January 2008 - 08:51 AM
Last post by:
rugbymatt_07 |
CAN ANYONE PLEASE HELP
I want to know if my 1994 triton mj 4d56 has an internal or external alternator regulator and if external where it is located. On the back of the alt are three wires, the large positive to battery and two smaller ones, one green and one blue.
 |
|
|
1 |
Andrew H |
198 |
12th January 2008 - 02:31 PM
Last post by:
Taquan |
i have a 96 4d56 non turbo and i just bought a turbo for it all manifolds etc But it never came with oil feed lines etc basically just need to find out where the numbers that are labeled go too ? and also have an intercooler as its a pajero turbo manifold etc so can i block off the intercooler for now as i'll mount that at a later date ? i'll post a picture
i need to know...
 |
|
|
0 |
wildplumdx |
316 |
11th January 2008 - 10:05 PM
Last post by:
wildplumdx |
hi guys!
one question, is it feasible to make my 1992 4x2 L200 have a CRDI injection without too much work with the engine? im a newbie here so i am in need of professional help.
thnx default/' '' />
 |
|
|
5 |
dale |
1,044 |
9th January 2008 - 01:01 PM
Last post by:
Taquan |
I'm a Newbie to this forum. Any help would be sincerely appreciated. I have a 1985 Mighty Max with the 2.0L engine. It's been such a good truck that I don't want to get rid of it. Recently it started smoking. I tested the compression. To my relief, the compression is good in all cylinders. I took my truck to a friend of mine who is a mechanic to get his opinion. He says he has...
 |
|
|
0 |
Mo Lee |
112 |
7th January 2008 - 03:40 PM
Last post by:
Mo Lee |
hi, can anyone point me in the right direction. my problem is there is very little oil getting to the turbo and this has caused the turbo to fail. the engine has only done 26000 miles, the feed pipe to the turbo is clear, the oil pressure light goes out while cranking the engine, the oil and filter have been replaced,(10/40 semi synthetic), i have just removed the sump to check for blockages in...
 |
|
|
2 |
autofix |
744 |
2nd January 2008 - 06:01 PM
Last post by:
venum |
Hi guys,
I have just purchased a Mitsubishi L200, it has a double cab. Thats all I know. I do not know what it is. I have telephoned Mitsubishi and they say it must be imported as we have no records of it. No matches to chasis number or registration plate.
I want to know if it is an Animal/ Warrior or other. I cant seem to tell the difference.
I really need to know...
 |
|
|
1 |
DAPPER21 |
353 |
2nd January 2008 - 05:56 PM
Last post by:
venum |
Hello ,
does anyone know where i can get a Service Manual for a L200 Model 2004 Storm EVO
i also need a Wiring Diagram/Description or Pinout from the ECU and MUT II ODB Plug.
the normal Manual for L200 is fine but do not fit exactly for my Model.
i also looking for a Wire where i can use for Diagnostic Programs like Evoscan.
i have a Make/Model:...
 |
|
|
0 |
L200_Storm_EVO |
487 |
1st January 2008 - 05:03 AM
Last post by:
L200_Storm_EVO |
I have a 1994 2-5 TD, when i first start it in the morning i have to wait a few moments before i can drive away as the steering wheel does not want to move, all of a sudden it frees itself and is fine, also there is a grinding noise on full lock which seems to ease when the cars warmed up, have checked belts and fluids , they are fine..... anyone????
Thanks in advance
 |
|
|
0 |
scubaboy |
126 |
30th December 2007 - 03:56 AM
Last post by:
scubaboy |
I've looked around for ages for some clear taillights for my 1988 MF Triton (Mighty Max/L200), which is basically the same car from 1987-1996 (ME-MJ) with no luck. I can find the stock assembly as well as the stock lense replacements (ie. amber, red and clear lense) but would like clear lenses to change the look of my rear end (the car's Laughing ). Anyone come across some clear lenses...
 |
|
|
2 |
fishpost19 |
514 |
30th December 2007 - 01:41 AM
Last post by:
fishpost19 |
Hi,
I'm having some problems that I can't seem to just identify? I've read the forum posts regarding similair issues but i'm either non the wiser or perhaps i can't accept some of the answers, any help or pointers would really be much appreciated!
I have a L200 - Single Cab 1998 2.5 TD
I have a full service history and carry out regular...
 |
|
|
4 |
DaveL200 |
1,397 |
29th December 2007 - 11:11 AM
Last post by:
jayster |
just a quick question, im looking at replacing the tray on my 96 triton with a styleside tub, but havnt been able to find any single cab tritons that had a styleside tub, so basically what im asking is, do they exsist? or is it only available with club cabs?
or if anyone knows any other way i can get a tub to fit on my ute, i'd love to hear it.
 |
|
|
0 |
deann |
89 |
29th December 2007 - 03:16 AM
Last post by:
deann |
Hi everyone. Hoping someone out there can tell me roughly what they paid for a clutch kit to be done in a 3.0L V6 Mitsubishi triton. Got mine in at the shop at the moment waiting for a quote.
started slipping a bit, although not always. Car has done about 220,000Kms and I can only assume it's never been replaced.
Any other thoughts appreciated.
Thanks,
 |
|
|
1 |
gsxr_750k1 |
420 |
19th December 2007 - 05:38 PM
Last post by:
frankloschiavo |
Hi
Can anyone tell me how to reset the SRS light on my 2007 mitsubishi triton? I installed a new stero and left the red/yellow connector in the glovebox off when I turned it back on. ECU did a system check and flagged it up as a fualt bringing red light on. I have plugged the connector back together but the light stays on. any help would be appreciated.. THANKS!!!
 |
|
|
1 |
gowie77 |
557 |
13th December 2007 - 06:57 PM
Last post by:
conanofcimmeria |
Anyone know how to remove the headunit from the L200
Also, any tips on fitting a subwoofer in there?
Cheers
Sam
 |
|
|
2 |
phatsam7 |
568 |
11th December 2007 - 09:27 PM
Last post by:
gowie77 |
Hello. My 2003 L200 is Overheating. Just had new head gasket fitted. Head skimmed and tested with no cracks. New timing belt fitted and balancing belt, New water pump and new cap fitted. Starts and drives no problem. No real overheat while driving short distance. On my way to work this morning after an hour of motorway driving the needle started to creep up but not into the red.
After...
 |
|
|
3 |
RC228 |
309 |
11th December 2007 - 03:45 PM
Last post by:
conanofcimmeria |
Hi,
I bought the mitsubishi's kit for my L200, 1999 (model K74T). The kit also works on a Pajero Sport. The kit's reference is MZ312043. I successfully installed in a wiring. I tested with remote controls, and this was only the flashing light up (the warning), the doors of not moving. With the key that did not work either. I then moved the switch on the box 'on' and I...
 |
 |
|
0 |
dem1980 |
237 |
10th December 2007 - 11:11 AM
Last post by:
dem1980 |
I have a 4 Door Colt 2800 TDI and I am looking for the Mitsubishi L200 Electrical Wiring PHTE9601 OR equivalent
 |
|
|
0 |
thered |
491 |
9th December 2007 - 08:23 PM
Last post by:
thered |
When I try to put shifter into H-4 or L4 it makes noise as though it is not engaging properly.
 |
|
|
2 |
santome |
756 |
2nd December 2007 - 01:06 AM
Last post by:
dull |
|
|