I have done various seaches to try and find a workshop manual - not the type that you get with the car but one that shows you what, were and how to... similar to the Gregories and Haynes ones is there one out there for the 2.4lt Mivec Lancer/RalliArt

any help here would be much apprieciated

is there any turbo kit for these engine, or it could handdle a turbo kit, with stock internals or needs reinforced internals?

Does the ralliart 05 have from stock headers? if not were i could find one?

thanks

Good day all!

Purchased a new 06 Mitsu Lancer Ralliart. Does anyone know of the link on this site or of any sites on the net that have good mods and what not for the lancer ralliart (or any lancer for that matter so long as it fits the 06 Ralliart)

Thanks in advance and looking forward to my new ralliart creation

Hey fellow Lancer fans! I just bought a 2005 Ralliart. I wanted the Evo but it's not available in Canada. So I want to make this car as close to the evo as possible, I'm just not sure where to start or where to get the best deals on the parts and work that I'm going to need. Any suggestions? also does anyone know if there are any lancer clubs in Edmonton and if so where and when do they meet?

I have a new 04 Railiart wagon. My mileage is somewhat dissapointing. I get about 16-18 in town and around 24 on the road. Any ideas on improving mileage in the MIVEC engine? There are no check engine lights and the dealer just checked it. I had hoped to get at least 20 in town and about 26-28 on the road. My Diamante wagon gets that.

Dan

After a lot of research I've determined that only MPG fix is academic. I needed to get about 25 in town and about 30 on the road. Therefore and for others reasons, have decided to sell this 04 Raliart Sportback. Color is silver, miles are 2900. Purchased new in January 2006. Price is 16.5. Has Trailer hitch, Bridgstone tires.

dakbaker@frontiernet.net 928-208-3822

I have a 94 lancer with a 4G92 DOHC engine and I am considering adding some mods to it. I want to start with a fuel pressure regulator and fuel rail as well as a piggy back ECU.

Which brand ECU and FPR would be best to use.

I found a Lancer with a sportronic transmission. I like to know where can I find one so I can get it for my 04 Lancer Sportback RA?

Also, if anyone found good body kits for a sportback please tell me.

Howdy all,

Has anyone seen these yet?

http://www.ralliart.com/05topics/05news/rai-05seat.html

[attachmentid=1610] [attachmentid=1611] [attachmentid=1612]

I am investigating their availability in Australia, but it kinda sux when you go into a Ralliart Mitsubishi dealership and they haven't heard of them...

Anyone that has any pricing info in any currency, please let us know.

what do we think of them?

Hi

Anyone know of any good source for ralliart parts? I mean limited slip diffs, etc

thanks in advance!!

Just parting out my ride and all I have left to sell is my Road Race Motorsports Cold Air Intake V2.

This is an outstanding Cold Air Intake Version 2 specifically designed for the 2.4L Ralliart Manual Transmission. This is a one piece set that comes with a 50 dollar K&N Filter that has 3k miles on it. It has a gorgeous sound once Mivec kicks in and I loved every moment of it.

Currently Asking $125 + Shipping. If you would like insurance on the package please ask. I'm located in Illinois.

Send all questions to Mortoc115@yahoo.com

INFO: The new version incorporates a CNC MAS housing for better flow and a cleaner look. RRM uses nothing but the best components to increase power! This intake alone will yield anoth 10 h.p. Powder coated red, it comes with all hardware and cone filter. For 5 speed only! INTAKEs OUT DYNOED , INJEN and AEM!

I saw the mr has the vortex roof mount. It makes the car look sweet, anyone know how much those go for, and where to get one? I also got a cool air intake from ebay, the guy said it would fit on a lancer 04-05, but im kinda thinking it wont because of the limite space in that section?

I have a noob question. I own a 95 mirage. I'm new to mitsus okay. I'm so new, that I never heard or seen a Mitsu colt. nor "charisma"

Anyways, my questions is, is my mirage called a "lancer" in other countries?
Just wondering. Please don't flame me.

Peace,
Jerry

Does anyone know where I can find a 2004 lancer ralliart wiring diagram on the web?

scot

[attachmentid=895]Hi

I've put in a Simota cone filter in my Lancer 1.6 GLX. It has about 1500 Kms on the odo (about 930 Miles) so it's still under warranty. Will this Mod do much in terms of power? Butt in Seat measurement says 'yes' and the sound of that baby howling is wicked!

I'm from South Africa, so the engine and thins look way different from you guys. Plus I have no clue if my car has the Mivec software. I've attached a pic as well.

Any help will be appreciated.

Clinton

[attachmentid=1157][attachmentid=1157]hey people this is my 04 ralli-art and i am curious as too if the oz rally and the ralli-art bodys are the same cause i have a friend back home with an oz rally body kit not used yet and he totalled his car he said he will give it to me but i dont want to pay for shipping if it isnt gonna fit got any answers

haromaxrider@yahoo.com

i have 10 grand to put into my ralliart and cant find anywhere to get alot of the internals that i want i already have the body done up and it is flawless not even my sponsors can find alot of the internals for me. my goal is to find a stage 2 or three turbo kit to throw on it but i cant find it please help me i want more speed i am running 13.78sec 1/4 mile at 101mphbut i want more let me know please i will have a pic of it on here very soon i just got the account so bare with me

Does the 2004 lancer ralliart have a intake air temp. sensor, or a mass air flow sensor? Where is it?

Hmmm. Well I was thinking. The Outlander and the RA Lancer share the same MIVEC engine right. Well I heard that there was an Outlander Turbo in the market so it would be awesome if you could cop a stock turbo from the Outlander and pop it right into the RA MIVEC engine identical to the Outlanders. Just an idea I thought of when I was reading up on turbos for the new 05' RA Lancers. Replies and confirmations would deeply be appreciated, I would like to know that I'm not just a complete **** and also it'd be awesome if this idea could happen. For all us RA owner's out there. Ehh Ehh.

Hey everyone, Im new to the mitsubishi area but im not new to the import raceing etc... i used to be running a hyundai accent 97 with a 2.0 beta swap and basic bolt ons with a basic dry shot of nitrous. after time i decided it was time for a new look. of coarse, the ralliart was the most practicle looking one that i could still use for a proffesional look for my job and then still do up in the engine area to have a little fun when the city night lites come on. any way. to my question. the block on my 2.0 beta hyundai could only handle up to 210 hp before the stock pistons, cam gears or other stock parts would start to blow or just give up due to the over exerted amount of horsepower. i knwo the stock ralli art is pushing just a little under 161 horsepower with the even amount of torqu, i have just purchased a NX express dry shot 0 port setup with a nozzle fireing 75 hp. i have custome build a cold air intake witch i amgin is giving me at least 6 hp and i am planning on putting on 4-1-1 headers with other hp gaining material... in all... with the nitrous alone, im prob gona be hitting 230 hp. CAN THE STOCK RALLI ART BLOCK AND CAMS HANDLE THIS MUCH POWER? i am aware of early detonation and understanding the laws of nitrous.. im very familyer with the installation etc.. but i am having a hell of a time finding the max hp out put recomended. im asuming its about 260, but thats just because of the dule cam shaft set up and the already modified system. if i am wrong or there are horrer stories of the max hp the block can handle, please let me know. the dealer ship has no clue what the max lvl is so they were no help. Thx guys

L8er

__Dan__

[B][FONT=Impact][SIZE=7][COLOR=blue]Whassup mitsu peeps ...does anyone know if it's possible to custom mold the evo 8 headlights onto a lancer? Or does anyone know where I can get the eyelids for the 04 lancers?

Hmmm. Well I was thinking. The Outlander and the RA Lancer share the same MIVEC engine right. Well I heard that there was an Outlander Turbo in the market so it would be awesome if you could cop a stock turbo from the Outlander and pop it right into the RA MIVEC engine identical to the Outlanders. Just an idea I thought of when I was reading up on turbos for the new 05' RA Lancers. Replies and confirmations would deeply be appreciated, I would like to know that I'm not just a complete **** and also it'd be awesome if this idea could happen. For all us RA owner's out there. Ehh Ehh.

Hey i am thinking of getting a ralliart soon and i just had a few questions.

1. on the 5spd does it have an anti roll back feature (similar to that on the new subarus)?
2. is the clutch hydrolic
3. is there any preformance softwear available


Thanx so much guys.....

I love my car just bought an 2005 Ralliart and it is one of the funnest cars that I have ever driven.

I definatly want to do some tuning on it some pretty basic stuff like exsaust, intake and mags.

Any one have some sugestions for a good cat back exaust no fart cans please!

Also would like to know a good chip to put in it and where i could find one.

As of June 8th 2005 My friend built

www.GenerationMivec.com

It's a website much like this built to help and push the aftermarket companies to support us.. Join and help us get out there!!!!

It's Got all the Cars with The Mivecs Coming out

I've been looking into Getting an Eclipse V6 and i think this will be the Place to go when MIVEC takes over!!!!

Help my friend and I as we take on this project and help build aftermarket support for Mivec Motors.

hey there,
im due to put new front and rear brakes on my evoVI, the car is standard @280bhp, so what would be the best disks and pads for the car????


and also???? are the rear doors on an evo V the same as an evo VI?????

looking for any web sites which sell ralliart parts for my evo 6 in particular the ralliart sport ecu.any help would be great.

Whassup fellow mitsubators...
I'm planning on putting together a custom turbo kit for my 04 ralliart and was just looking for some advice on what brands I should be looking for, for the parts. Ralliart performance parts aren't easily accessible here in Canada and I understand that there is a kit available in the States, but I'd rather put together my own system and maybe save some dollars as well as achieve more power than the measly 80hp that the $4300US turbo kit would give me. I'm looking for the best of the best parts...any advice would be greatly appreciated. 80hp from a turbo kit is dang weak...I might as well go NA. Please and thank you!

Ralliartist

Hey, i just bought the '05 rally art. I am looking to drop around $7500 american or $10 000 canadian into it. Right now, it is sitting on everything stock. Haven't had it more than a week. What are your suggestions for the first couple things I should do?

if you guys got some good sites with some rally art performance parts or dress up kits hook me up thanx

need a stock ralli art body kit, some jag treaded mine. if any one has, or knows where to get one help!!!!!!!
thanks

need an 05 ralli art body kit, stock. some jag treaded mine, so need to replace it. if you got one or know any one that does help please!!!!!!!!!!!!!!
thanks,
ps whats up, im new to the community!

Is the ralliart model available in the states

I recently bought a 2005 lancer Ralliart and am wanting to do suspension work, but am needing advice and ideas. cheers

If somewone out there has owned a 2004 sportback ralliart for more than a day please let me know what you think about your car.

Thanks

I have a 2004 Lancer RA and three times now it happened to me: when I am in a situation where I need to make a quick 3 point turn with the Ralliart, the steering becomes so tight that I needed to steer it with both hands. Now I said 'Quick' meaning that that I'd be revving high and switching gears quickly. Could this be because of the speed-sensitive steering (?) kicking in (triggered by high RPM?). If so, it becomes dangerous making 'quick' 3pt turns only because you can't steer well enough in a crunch situation and may end up mounting a curb. thoughts anyone?

Hi evry one I'am new in all this forum and car talk, I puirchase two day a go my new MITSU i pick up a brand new Mitsu 04 RALLIART and I'am in love with it , I was wondering if any one here had one ahd if so I will like to get some info in MODS for the car but traying not to void the warranty .
!0 yeas 100.000 miles ...............
Thank's all GUS...........

Hey. I got a new Lancer Ralli Sportback and my fiance is already corrupting me. Can I use the same mods for the Ralliart in my Ralli Sportback?

I'm new to having a Mitsu and trying any mods. Thanks--