Hi all,

Recently, we have had a thread going on replacement of O2 sensors. This is a hot topic during these times of increased fuel prices and understanding complicated engine management systems. The O2 sensor is an essential part of the engine control and can fail without having any fault codes come to our attention.

It will become increasinlly important that we know how to...

Ok, 1-888-MITSU2005 ..that is the number to mits of north america...they are about ten mles away from me..I recently called to get my radio code because my battery had to be replaced...I just asked to speak to someone that could help me with my caode..The lady on the other line never transferred me just asked me for my vin and serial...

Ive tried to make the pictures correspond to correct models.if ive screwed up let me know.

99-02 Pajero/Montero Sport

i14.photobucket.com/albums/a319/gmcke03/mitsubishi-133-1.jpg' />

98 Pajero/Montero Sport

i14.photobucket.com/albums/a319/gmcke03/pajero96sh.jpg' 'user...

One of the three most asked questions on this forums relates to the 4WD operation and what the flashing dash lights mean. I have pinned this topic and attached a link which describes the system quite well (including pics).

If you are having trouble with your system or just want to know what is the correct operation is vs incorrect have a look at this before searching or starting a...

All credit for these manuals go to "the moscow 4X4 pajero club"


I havent had a chance to look at most of the stuff in the links but theirs loads and should definetly prove useful to you all default/' '' />...

hi i have np pajero has anyone wired the dummy tail lights up

Any help with a fuse box diagram would be helpful. I recently bought this vehicle and the high beam for the headlights does not work. They work fine on the low beams so I think that it is maybe a relay? Any help would be great.
Thanks

I am trying to connect trailer lights to my rig. There are five wires for the light harness: right turn, left turn, tail lights, brake lights and ground. The rig has one green and one black wire for each light and some have two greens and one black. Any ideas which wires I should be connecting to?

Thanks!

Just picked up a 97 Montero with what appears to be factory installed fog lights. There is a button on the dash just to the left of the gauges that looks like fog lights.

The lights do not come on, and the button does not illuminate, though it appears to work fine.

My first thought is a fuse, however the manual does not mention fog lights anywhere and does not the show the...

Just bought a 94 4m40 2.8TD, 50,000km, which is a fresh Jap import
We live in the lower half of the south island
It has a real bad miss on cold start up.
If let to idle on cold start up, it has a miss for 30 sec and exhausts clouds of pale blue
smoke, for the period of the missing
If I give it 1500 revs on cold start up, it will clear itself within 10 sec
No...

Hi there, i'm wanting a wider look for my shogun and i'm unsure whether to fit spacers or chunkier tyres.

Spacers would probably be the easiest option but i haven't been able to find any. But the chunkier tyres would come in handy for offroad use as the current tyres are sh*t offroad and in the snow.

The current tyres are Pirelli Scorpion Zero 285/55/R18 113V

Hi - i'm Steve and am new to this forum and am looking for anyones opinion or experience on a fault i have mith my Mitsubishi.

It is a UK Mitsubishi Shogun 3.5 V6 1998 model with distrubutorless ignition.

I have multiple misfires and an EML on, i have had the codes read which revealed in the following order;

Camshaft sensor
Crankshaft sensor
TPS...

Hello. I rebuilt the engine on my 2000 Montero. It has the 3.5L 6G74 SOHC. My timing belt is set up perfectly, however, my ignition timing is 28deg. advanced. My mechanic checked it (for $240) but didn't know what to do. Ignition timing cannot be adjusted supposedly. It is controlled by the sensors on the camshaft and crankshaft. The vehicle runs smooth but when it warms up or is...

Heyy guys,


i have just bourght another SWB pajero 4 parts!

It comes with 2 motors, a 3.0l and a 3.5.


I am looking 2 sell the 3.5. It has around 160,000 on it, it has come out of a rolled 1999 model paj, and been put into the 1991 model swb i have bourght.


I also have other assorted parts 4 sale.


I am located in...

Heard that plugs were under the the intake manifold. Is it pertty much unbolt manifold and there they are? Has anyone one attempted this and could give some advice or poosibly refer me to a place that could give step by step instruction. Thanks in advanced.

I've just recently purchased a full size 1998 Montero w/65k. First off, gorgeous vehicle!! 2ndly, I'm interested in purchasing a keyless remote fob off of ebay. The only thing is trying to have it reprogrammed. There are a couple of vendors that are selling some aftermarket key fob w/reprogramming instructions, but I'd like to stick the the original remote since this Montero...

Hi Guys

Ive got a problem with my Shogun Auto. I can do the odd bit of spanner weilding but electrics baffle me. So here goes: After a few miles of running, the ABS light comes on. does this automatically mean there is a problem with the ABS or could it be a wire break/ crap on the sensor? default/beer.gif' ...

i own a two door mitsubishi pajero 1999 i dont have the manual and il like to know what does a flashing light in my board means the symbol is like a near empty ( of some liquid) plastic bowl

I looking to buy a 99 3.5L Motero and I noticed that the 4x4 lever is a little loose, you can move it from side-side wiggles too much, the lever on my 92 montero is more stiff and you cant move it from side to side.

Does anyone have any idea of what could this be? I was thinking of buying the motero and fixing it but I'm not sure if it's something serious.

any held...

I have a 1994 Montero SR with a 3.5L DOHC engine. The original engine threw a timing belt and went ka boom. We swapped one of those "Japanese Origin" engines out of an automobile for the original. I picked this Montero up as a project vehicle, and it has never run since I started working on it.

The new engine, originally set up for a FWD car, had to be stripped completely...

Hi
any owners of the V45 out there? I just saw the car and the condition is very good, smooth engine. Done 120k kms. Just wanted to hear from other people whether
it's worth buying. What's the maintainence like? Would also like to hear
from owners of this car, if any. Thanks in advance.

RR

Hello everyone. I have an '02 Montero Limited 3.5l. It was overheating suddenly with no fluid loss. Clutch fan seemed fine and electric fan was working. I replaced the thermostat and still overheated. No water in the oil so I decided to change the water pump. After replacing this, I really do not feel that this was the problem. The pump felt fine with no play and fins looked ok. Anyway, while...

Hello

I just bought a 1999 Pajero Io (Pinin) GDI and I need the user manual. Plase let me know where can I find it.

After buying my Pajero of fleabay the engine blew after 2 days. My heart fell me arse that day I can tell you, so have now bought a recon engine but have 2 mates that keep letting me down so I'm now stuck with a great 4x4 and costly engine which go together like marriage but skill or knowledge of how to do the job myself. Any offers!!! or know of a good but cheap garage that can do...

I'd been looking all over the internet for a solution to this and figured I'd share.

My husband and I own a 2003 Mitsubishi Montero XLS with the RV Meter
(digital compass, clock, ambient air temp, and fuel guage).

Well a couple nights ago, my husband saw that two symptoms were happening:

1) the outside air temp guage stopped working (displays dashes...

I had a remote starter installed in my 2001 Mitsubishi Montero Sport aftermarket in December of 2004. Shortly after, my doorlocks started to act up. I finally took the vehicle back to where the starter was installed. They checked the wiring and fuses and found no problems. They showed me the spec sheet they use on this model vehicle for installations. Under warnings it notes: When doing...

Hi
I have a 1991 V6 3.0L pajero. The alternator belt is newish but making a lot of noise. Had the belt off and it's fine. As far as I can tell the noise could be coming from the tensioner pulleys - which although they rotate freely, dont feel as though they have any lubrication any more.

Ran some light oil in them and the noise subsided - but that wont last for long...

Hi
im considering buying a 1996 pajero v45 3.5 v6 auto. i noticed that the 2H lights kept on blinking while i was driving it. wondering if this is something serious? the owner of the car doesn't have any service records, like receipts and all, so not sure what could have went wrong.

any help would be much appreciated.

thanks in advance.

r

I have adjustable ride control on my 1994 montero, but need to replace the shocks. Is there any issues when I disconnect the wire from the adjustable shock and replace it with an aftermarket (Procomp)? Will it cause the computer to send an error signal and trip the check engine light?

Does anyone know the difficulty level of changing the shocks on a 1994 Montero.

Thanks,

Hello friends.

Could anybody tell me, how can I get the owner´s Manual, for a Montero 2003 Gls, v6 3500cc.

Recently, I get one of this wonderful suv, but, I don´t have the manual, and I need to know some specs., about it.

Thanks a lot.

Hi there, my Shogun Sport has 245/70/16 tyres on it and I'd like to replace them with something slightly larger. Does anyone know if the 265/70/16 tyres from the L200 would fit ok? (Not sure why such similar cars have different tyres?!) I could also go for 255/70/16 I suppose as somewhere inbetween.....

Any advice is very much appreciated!

Thanks

Hi all.

I am new to this forum and perhaps my post might not get many objective answers default/57.gif' '57.gif' /> , but here it goes ...

I am torn between getting a new pajero 2008 3 door diesel auto or a toyota land cruiser 3-door diesel auto.

From what I...

Hi guys!

Recently, I had a top hose leak which I overlooked and almost cooked my engine. The coolant was totally dried and the engine just died. Luckily, I was driving quite slowly around the neighborhood.

I replaced the coolant and the engine runs fine, but the damage is now manifesting itself with a daily coolant loss. I suspect that the head gasket is gone, but I...

I just purchased a used 2003 Montero Sport ES. I replaced the battery in the remote control, but it won't work. I'm worried that I will inadvertenly lock the keys in the car. Does anyone know how to program the remote?

Also, I didn't get an owners manual with the vehicle, is there anywhere online I can download one?

...

Hi,

Any knows where to download the owners manual for the Challenger model 2006?

Thanks in advance!

Jan

Hi
i have a pajero IO gdi 1.8 1999 model, and since i gotted the car, i have noticed that the idling speed goes as low as 500rpm.
I already try cleaning the throttle body, the EGR valve, PVC and so on.
I just want more ideas on the subject, so that i can solve the problem. Anyone?
default/liebe011.gif' ...

hi im in middle of removing my shogun 3.2 did fuel pump for repair , can anyone help out with how to set up pump timing marks and anthing i should look out for , thanks in advance regards andy

I need to get the part No. of the electronic unit of a 4X4 automatic transmission AW 30-40LE (V4AW3), olso the number of the engine ECU (glow plug and EGR electronic control unit) for the 4M40 TDI, any help will be appreciated. if you have a pajero 2.8 diesel, year 1996-2000, you can help me looking for the number in your vehicle.

Thanks

E-mail:...

I need help with my 1997 Pajero its a 2.5l 4d56 model my fuel consumption rate is currently at 5km/l is this the correct fuel economy for it and if not i'd like to know what can i do to the engine increase this to 7-9km/l. thanks

Hello all,

Error codes indicate the sensor 1/bank 1 O2 sensor is causing my check engine light to come on once the engine warms up on my Montero. It appears that sensor is located on the drivers (left side) and I have a couple of questions I'm hoping someone may be able to answer. First, how do I determine if it's a California or Federal model sensor (and if I erred on the...

Hi, is anybody know how to find an equivalent brake pads?
I have a 2000 Mitsubishi Challenger 2.8TD, and looking for a replacement brake pads. Since the SUV is grey/parrallel import in Indonesia I need to find a matching equivalent.

Anybody can help me?

my 91 montero wont shift in 4th also the o.d. button doesent work any ideas????

I have a 1994 Montero with a 3.5L DOHC 24V V-6. I'm having a heck of a time after an engine swap with no spark at the rearmost coil pack. All options have been exhausted (see my other post) to find the reason for this; and I am fairly convinced the ECM coputer may be faulty.


Does a Mitsubishi dealer have a way to test this, or is this a "buy to try" item like the...

I have a 1998 Pajero IO. The car rumbles, loses power and the engine warning light comes on. Has anyone else had this problem. The vehicle was originaly from Japan.

Hello, All!

I have a '90 Montero with the 3.0 engine. It's a great work vehicle for me but gas prices are making it tougher for me to drive. I'm getting 15mph right now. There are a lot of miles on the old girl (about 208k) and it's time to re-do the valve guide seals, timing belt, and maybe head gasket (does that smoke look a little white?).

It...

03 montero ltd. - mitsu put foam at the top of the radiator to direct air flow thru the radiator from the front of the truck. After 6 years the foam was turning into powder and really annoying not to mention not doing its job. So I went down to the hardware store, picked up a 2 ft long piece of aluminum sheet metal, cut it to shape, painted it and screwed it into the frame. I use the existing...

Im trying to locate the accumulator-dryer on my '03 montero ltd. Does anyone know where this component is located? I found a diagram of the condensor at:



and it seems that the dryer is actually part of the condensor - its a long slender black tube to the side of the condsor radiator. Can anyone confirm this for me?...

Hi, all. I have a following problem which all local mechanics cannot diagnose and fix properly.

My car engine turns off when braking (means not idle-ing properly ) or when plugging into rear drive etc.

Works fine on cold start and after 30 min of driving or when engine gets warm the problem starting again.

So i have to shift to N when coming to stop and plug...