accept the compliance plate that is on the firewall of our NC Pajero The roadworthy place wants a number stamped on the chassis....
146,000 k's on the clock...
 |
|
|
3 |
castawaysx2 |
126 |
24th May 2008 - 09:00 PM
Last post by:
castawaysx2 |
My 2001 v6 pajero is making squeaking noise when ever he brake is applied,all disc pad is brand new,i was wondering if it could cause wear lock pin r guide pin the caliper itself have a minmal play in it whenever you move it. any advise woulb a ppreciate.
 |
|
|
10 |
kareem evo |
403 |
24th May 2008 - 08:58 PM
Last post by:
kareem evo |
hi i have a 1996 2.8TD mitsubishi challenger. And the A/T warning light has started to flash on my dashboard. It has only happened a couple of times and tends to happen when the engine is warming up. It will only flash for about 30 seconds. Can someone please help me
 |
 |
|
4 |
colinley |
174 |
24th May 2008 - 11:27 AM
Last post by:
colinley |
sorry for not replying last night, anyways thank you everyone, thank you very much.
 |
|
|
1 |
admira |
38 |
22nd May 2008 - 09:00 PM
Last post by:
Benckj |
does any1 have a diagram of the fuse panel under the passenger side of the 96 challenger i got a blown cigarette lighter fuse and i wanna change it
 |
|
|
0 |
Schillachi |
123 |
22nd May 2008 - 07:47 PM
Last post by:
Schillachi |
Hi all,
I just purchased a Montero sport LS 1999, which comes with the default infinity stock radio. I own a Pioneer DEH-P8600MP that I used when I had my last car, and this is the one I want to put in instead of the infinity one. I took the montero to a local car shop dealer, and they said that in oder to make the swap, they would need to re-wire everything inside of the car so the...
 |
|
|
1 |
kraxx |
91 |
22nd May 2008 - 06:58 PM
Last post by:
kraxx |
hello there, i recently been hearing a scratching noise when i hit the breaks, and when making a turn, does it have to do with break pads, 3 months ago i change the front brake pads, please help its becoming annoying , just want to have an idea if i should seek a local mechanic or go to the mitsubishi shop.
 |
|
|
6 |
admira |
92 |
22nd May 2008 - 05:10 PM
Last post by:
admira |
Hi all, am looking for some advise. Have 99 treg shogun 3.0 auto LWB and at low speeds I sometimes (not always) get a weird squeek. The best was I can describe it is almost like the whirl of a police siren. ANY ideas, thanks
Elvis24
 |
|
|
1 |
elvis24 |
52 |
22nd May 2008 - 04:18 PM
Last post by:
KiT TeUnG 2549 |
I got a *P0161 O2 Sensor Heater Circuit Malfunction (Bank 2 Sensor 2)* code and I'd like to replace the part. I just need to locate the bugger. Bank two is on the right side (US driver's side, right?), but I'm not sure where sensor 2 is located.
Any help will be extremely appreciated!
Thanks
 |
|
|
3 |
yamama5 |
1,214 |
22nd May 2008 - 07:39 AM
Last post by:
sabre |
Only second post on here
got a UK spec 1998 shogun 2.8 TD GLX did not get a user manual with it
question from a newbie which one for the other models would suit?
assistance appriciated
TY
Mark
 |
|
|
2 |
markp |
185 |
21st May 2008 - 03:43 PM
Last post by:
markp |
Hi guys, hopefully someone has done this job and can give me some pointers. I need to change the clutch in my 99 Montero Sport. It is an ES model with a 4 cyl engine and a manual trans.
When the car is in Neutral, it whines like nobodys business, when you push the clutch, it stops. It sounds like the Release Bearing whining.
I need to change the clutch and am aware of the...
 |
|
|
1 |
dmbfanintn |
99 |
20th May 2008 - 10:49 AM
Last post by:
dmbfanintn |
I am chaging the serpentine belt as we speak after a couple of tries the belt seems to be too tight. I just want to make sure that I routed the belt corectly. I am looking for a drawing or diagram with the pulleys and belt. 2001 Montero XLS I thank you in advance for any help.
 |
 |
|
3 |
novice |
611 |
20th May 2008 - 10:42 AM
Last post by:
aviator79 |
Just to let people know I sorted my engine light out could have cost me a grand as was told by Mitisbushi turbo was gone ,turns out it was a boost valve solenoid £160 AND vgt SOLENOID £80 ,now sounding great ,and told by a fitter at Mitisbushi this is a common fault on all 2.5 td including L200 and newer shoguns beware ,if you get a fault get a code and I have got the code faults if I can will...
 |
|
|
0 |
snapper37 |
96 |
20th May 2008 - 08:01 AM
Last post by:
snapper37 |
hi, i have just bought a 1993 pajero v6 3000cc swb, i have no user manual so hope someone can advise, i have a light on the dash, a pic of a car with an arrow above and below and the word HIGH, when i drive above 30mph a red light starts to blink "HIGH" i have tried changing the wheel drive gear but nothing seems to stop the blinking light, also the engine sounds loud and very poor fuel...
 |
|
|
0 |
rigsthebest |
45 |
19th May 2008 - 05:30 PM
Last post by:
rigsthebest |
hi i have a 1996 2.8TD mitsubishi challenger and over the last few days an A/T warning light has been flashing on my dashboard this will happen for about 30 seconds and then goes off it tends to be when the engine is wwarming up it has only happened twice but it has got me worried in case it is the gear box or somthing that is going to be a big and expensive job can someone please help me with...
 |
 |
|
0 |
colinley |
66 |
18th May 2008 - 01:46 PM
Last post by:
colinley |
Hi guys I have a water leak from above the auto gearbox, could this be the heater matrix or would that leak inside the car. Are there any water pipes above the gearbox
1991 3.0V6 automatic Petrol
 |
|
|
2 |
Paulcoy |
80 |
18th May 2008 - 04:46 AM
Last post by:
Paulcoy |
Hi all,
I'm about to purchase my first Shogun tomorrow, a 5dr 3.0 V6 GLS registered 1998 on an 'R' plate. Manual/petrol. I'm a little confused on whether it is technically a Pajero as that name isn't listed anywhere on it/in it or on the V5.
Any ideas on cost to convert to LPG?
The Alloys have gone all scummy, dull & bobbled in the middle...
 |
|
Help!
Manual required for Shogun
|
0 |
LadyG1976 |
39 |
17th May 2008 - 01:12 PM
Last post by:
LadyG1976 |
Hey Guys,
Just picked up a 1990 Pajero 7 seater. First 4X4 default/biggrin.gif' 'biggrin.gif' />
I need help with two things, the old owner ripped the stereo out and just cut the wires so I have no idea what goes where, nothings labeled and I'd like to put a new CD player...
 |
|
|
1 |
Harreh |
116 |
16th May 2008 - 11:22 PM
Last post by:
prashanth |
Hey guys,
I came across this the other day and I’m thinking about looking into it because it looks pretty legitimate. I was just wondering if any of you have used it or have seen it before? It’s a 90 minute instructional auto detailing DVD with hot cars and hot girls!
It Looks cool!
Here are some clips from the actual DVD on YouTube:
 |
|
|
0 |
kells |
31 |
16th May 2008 - 03:03 PM
Last post by:
kells |
When the chance of a low mileage (47K) 2001 Shogun 3.5 Gdi SWB came along I did the research, full dealer service history with receipts for the minor work carried out over the years. Paid the cash for the motor and initially very pleased. Refueled after 150 miles and then lost power and wouldn't rev above 3000 rpm. The Nottingham Main Stealer has quoted £4000+ for new fuel pump, tank and...
 |
|
|
6 |
TrevB |
135 |
15th May 2008 - 01:05 PM
Last post by:
Wicksy |
dear Brothers!
Hi
i have mitsubishi Pajero mini a japanese model make 2001. i need workshop manuals and electrical wirring diagrams for my car, i have searched this website and other forums as well but could not find it. if any one on this forum has it, kindly email or post it to me. i will be highly abliged for this.
Nasir
 |
|
|
0 |
nasirmahmood |
145 |
14th May 2008 - 11:57 PM
Last post by:
nasirmahmood |
I am driving a 1994 Mitsubishi Pajero Exceed (4M40). Just 2 weeks ago, I noticed that my engine stalls (engine icon lighted) after starting from cold and running for a few miles. It often always stops at the very same spot and is usually hard to restart (about 30 seconds)
Anybody knew the possible cause of this?
Thanks and best regards,
 |
|
|
0 |
dw1veu |
115 |
14th May 2008 - 11:01 PM
Last post by:
dw1veu |
Hi, I have a 1994 2.8 auto diesel exceed which has no handbook. Does anyone know if it has cruise control and where the dash control button would be (icon?). Thanks. Viv
 |
|
|
0 |
vivienne |
73 |
14th May 2008 - 05:00 AM
Last post by:
vivienne |
I have a 2001 Montero Sport with a busted engine. the engine code on mine is J20, i bought an engine from a junkyard that is supposed to be interchangeable, but is a J24 engine code and has a slightly different pulley that flywheel mounts on (it appears to stick out further on my j20) and is different at bottom of engine where the engine mounts to the tranny (the j20 goes to the bottom of the...
 |
|
|
0 |
audadren |
100 |
13th May 2008 - 10:51 PM
Last post by:
audadren |
Anyone know where I can buy an actual service manual for a 2003 Shogun Pinin 2.0 GDI Warrior. Specificaly covering the wiring/circuit diagrams.
I've wasted countless hours chasing down mythical free downloads and wasted too much money downloading the same pretty basic Workshop manual that most online vendors seem to peddle.
any help would be greatly appreciated.
 |
|
|
2 |
mr cranky |
160 |
13th May 2008 - 10:38 AM
Last post by:
2002lancer |
My compass/temp on pjero 1996 model is malfunctioning and it doesn't display anything. I later found out that a resistor was busted labeled as R12. My problem is that, I can no longer read the color code of the resistor. I need help from forumers who tried opening their e-temp/compass.
Attached is a photo of the compass and the internal part for...
 |
|
|
4 |
jefflivara_php |
193 |
12th May 2008 - 04:55 PM
Last post by:
Benckj |
Hi,
Would anyone be able to help me locate the MFI Relay on my 1993 mk2 3.0 V6 Shogun please?
Thanks
Dan
 |
|
|
0 |
Dan_in_Hants |
67 |
11th May 2008 - 05:42 AM
Last post by:
Dan_in_Hants |
I'm replacing the timing belt on my 95 Montero 3.0. I stopped by Advanced Auto and picked up a Harmonic Balancer removal kit. On the Balancer I see what should be two screw holes where I should attach the remover to the Balancer, but when I went to attach the remover screws I found that the holes are not threaded. Now I'm mystified. How do I secure the remover to the Balancer? I'm at a...
 |
|
|
1 |
dsiglin |
141 |
10th May 2008 - 08:45 AM
Last post by:
manybrews |
hi all
Can anybody explain how to disassemble the instruments cover (compas ...) inorder to see why the water in the middle instrument evaporated ? !!!! or give me a link to the workshop manual for the 99 montero 4 doors....
moujab
 |
|
|
4 |
moujab |
135 |
10th May 2008 - 06:27 AM
Last post by:
Nur Othman |
hi,
Can any body help or point out the url that showes how to assemb the cable between the car OBD II connector and an RS232 connector
moujab
 |
|
|
0 |
moujab |
132 |
9th May 2008 - 12:52 AM
Last post by:
moujab |
Hi All
I have a 2001 LWB 3.2 DiD Pajero. The audio system (japanese) has been working perfectly till last week. Although all the controls are in Japanese, I have managed to learn the button functions. Last week, the volume on the system dropped to about 25%. When I turn the volume dial up, it wont increase beyond (appx) 25% of the volume. All other functions work perfectly. I have...
 |
|
|
1 |
msacharya |
83 |
8th May 2008 - 11:56 PM
Last post by:
Benckj |
Just for practical experience on the braking system. I went off road and when I had to brake for another car approaching the brakes made a very strange noise. was like metal on metal and could not get it to a stop. It eventually did. It would go well for a few stops offroad and then it would re-occur. Then it also happened in town on a tar road(with holes)
So the guys stripped...
 |
|
Pajero
Malfunctioning of ABS brakes
|
2 |
Tiago |
163 |
8th May 2008 - 08:31 AM
Last post by:
siouf |
Hello
I have posted few days ago an topic and i have ewplained my problem .But now the situaton has changed a litlle bit.
So the problem is folowing :
When the engine is warm , i have problems starting it , it cranks good but will not start i have to crank for about 7-13 seconds . I have puted new orginal spark plugs but nothing has changed.
When you drive...
 |
|
|
1 |
vedran071 |
116 |
7th May 2008 - 03:49 PM
Last post by:
Benckj |
CD/LocK light starts blinking every 20 Kms. Which goes off after restarting the engine as guided in manual. Whay could be the problem.
 |
|
|
2 |
shahid |
309 |
7th May 2008 - 03:40 PM
Last post by:
Benckj |
Hi all,
So I have a 2001 Montero XLS. Great car, etc. I took it in to get the timing belt replaced for maintenance purposes. Well they didn't align the timing right, so I get a call and they said that they started the engine and it was making noise. So there might be valve damage but they couldn't take in the engine shop because it was closed until Monday. This car has...
 |
|
|
4 |
bstarski |
116 |
7th May 2008 - 09:26 AM
Last post by:
bstarski |
Just a quick intro. I'm in the middle of a classic mini project and have been looking for odd bits and pieces I can change to make it really unique (but in a good way!!). The other day whilst in town I saw the following Shogun model driving down the road.
I was wondering whether anyone could shed some information on the headlights, specifcially dimensions and where I could...
 |
|
|
5 |
jammy_basturd |
900 |
7th May 2008 - 05:51 AM
Last post by:
Fuzzo |
Hello everyone! I want to share with you my experience of the folding power mirror. It was working fine lately until it stopped. I have to locate the problem and it goes to the controller unit where the relays are inside. The motors inside the mirrors are fine. Inside the controller there is a capacitor that has leaked. Have it replaced and fresto, the folding mirror again worked!
 |
|
|
0 |
dolphinpajero |
71 |
7th May 2008 - 04:04 AM
Last post by:
dolphinpajero |
hello all, i seem to have a problem with both side mirrors (powered). they just suddenly stopped working, i have checked the fuse its fine. any ideas will be muchly appreciated
1993 pajero gls 3l auto
222000km
cheers shane
well sounds like no one has had this problem
 |
|
|
5 |
pajerogls |
213 |
7th May 2008 - 03:52 AM
Last post by:
dolphinpajero |
Hello everyone! I hope someone can help.
I have a 1992 pajero TD LWB with 4H drive shudders and vibrates at about 20kph. There was a stange sound and vibration coming from the front possibly in the transfer case. The shudder sounded like chain touching something in cyclic.
I have used the 4H wd before without problem even at 60kph from 2H to 4H and back when towing a trailer.
 |
|
|
5 |
dolphinpajero |
184 |
7th May 2008 - 03:43 AM
Last post by:
dolphinpajero |
guys, is there a way to fix the digital compass/thermometer? i tested the main socket supply and it gave me a reading. but how come the compass does not work? is there anyway it could be fixed or simply replace it?
 |
|
|
3 |
testament11 |
353 |
7th May 2008 - 03:30 AM
Last post by:
dolphinpajero |
Hi, can anyone help!
When I put my pinin into 4wd the top two green lights don't come on. The orange centre lock light works and the bottom two green lights are on for 2wd. Is it the bulbs? How do I get behind the dash to check the bulbs?
Many thanks for any help.
 |
|
|
2 |
bazzie |
218 |
6th May 2008 - 11:40 PM
Last post by:
testament11 |
2002 Mitsubishi Montero has decided to vibrate around 35-45mph. It's not a steady vibration, intermittant at best. Wouldn't bother me but it shakes the entire cab!! It's like you're driving over grooves in the road. Anyone hear of this problem and if you know...the solution? Thanks.......It seems after further trouble shooting that the tranny is going into 5th gear...
 |
|
|
3 |
GPE |
191 |
6th May 2008 - 10:55 PM
Last post by:
Benckj |
Can anyone help? I think ive unscrewed everything I could see, Im pulling and most seems to be coming off except the area closer to the seatbelt. Is there some screw im missing? And do I need to pull the top and bottom panels off?
 |
|
|
0 |
hemogoblin |
82 |
6th May 2008 - 09:40 PM
Last post by:
hemogoblin |
Hello,
Newbie here, and was wondering if anyone can tell me if is possiable for me to pull check engine codes without a reader?
 |
|
|
0 |
Login:GunDude |
76 |
6th May 2008 - 03:54 PM
Last post by:
Login:GunDude |
Hi everyone,
I am trying to remove the door panels to get to the speakers.
I remove the door lock / power window unit, remove the door handle panel, remove all screws, and the tweeter cover (delta?), the arm rest and the screw in there, but I still can't seem to get the panel off. Do I just pop the panel from the bottom? I don't want to break anything. Or does...
 |
|
|
0 |
bstarski |
71 |
6th May 2008 - 08:54 AM
Last post by:
bstarski |
Hello to all..
I have a Montero 1997 LS automatic 3500 V6 4x4.. i will to change all shock absorber..
On front i will put oil Tokico 3275
But i'm confused on what to use on rear.. i start looking for help.. some said use gas.. other said use oil..
I'm looking for all the confort i can enjoy.. ...
 |
 |
|
2 |
hgt |
132 |
5th May 2008 - 04:24 PM
Last post by:
Benckj |
Hi All,
I just bought a 2002 model montero and have just tried to change the oil but have been un able to release the sump plug. I have tried all the tools I have and none seem to fit, the closest i got was a 17mm socket.
Has anyone had this problem before or can you recomend the best way of getting it out?
 |
|
|
2 |
Herbi |
150 |
5th May 2008 - 06:30 AM
Last post by:
Herbi |
I JUST PURCHASED 1990 MONTERO,AND HAVE REPLACED HEAD GASKETS,COIL,IAC VALVE,AND COOLANT TEMP SWITCH.IT STILL WANTS TO STALL WHEN PUT IN GEAR.IT ALSO IDLES ROUGH WHEN WARMED UP.COULD THAT POSSIBLY BE THE COMPUTER GOING BAD?GOING TO HAVE IT CHECKED JUST IN CASE.ANY INFO WOULD BE HELPFUL.
 |
 |
|
1 |
LMOROSKI |
112 |
|