hi guys
i went to pedders the other day to see how much id be up for some lowering blocks.
the guy told me that they dont make them for my model.
ive got a 94 model 2l carby express. is it true? arnt they universal?

Hi guys I am new to this forum, I own a 93 Express van, that I use to transport my motocross bike.

I am looking into changing the diff centre to get more speed and less torque, I am in 3rd gear by the time i get to 70kph, and it chews alot of fuel, revving highly to sit on 110-120 out on the country highways going to races.

I just want to know if anyone has done this before...

hello peoples!

I am from Australia and am trying to find workshop manual for my 96 Express Van with 4d55 engine. Seems to be a weird year as haynes and other manuals seem to be non-existent.

Anywhere i can download a manual as 4d55 seem to be a common engine just not in an express van.

Thanks again

Hello all ! I am a happy FORD owner that now has a Mitsubishi as a work van . Question ? I noticed i couldn,t even bypass the std aiecleaner with a pod because of what looks like rather stringent pollution control measures ? Maf sensor it looks like? I have fitted extractors ,2" zorst, quality oil & bumped up the timing slightly, it wont ping on premium but it Does on std fuel. SO ?...

my express only gives me about 280km on a full tank, so im abit squirmish about moving to 15" interceptors, you reckon fule economy will increase?

how much you reckon by? thanks.

bored....with 14"

My LPG stopped working on my van, i was wondering is there any common problems or common fixes anyone know of? ive only got it installed last yr in |September...

it just dies, when i switch it from fuel to gas.

thanks.

anything i need to look out for?

Hello there, i was driving home when suddenly the engine stop running so i slowly pull out of the highway and check found out timing belt was broken. What damage is will cost to the engine. somebody told that it will only breaks the rocker arms to protect the valve to be bend how true is this ENGINE TYPE 4D56

Need to get my hands on a poo brown steering wheel for my express, 1990 model, thanks.

Anyone know cheapest shocks for front mitsubishi express? 1990?

thanks.

yep and the cheapest wreckers around?

or anyone know anyone wrecking there express? thanks.

-----

My van since ive owned it, has been running high idle every morning i start it,
sometimes i cant wait 5 minutes for it to go back down from 3000rpm to 4000rpm to idle rpm.

I find it frustrating and does anybody know whats going on here? why every morning i start it, it idles high?

its the 2L carby motor, 1990. thanks.

Hello everybody, I'm new on the forum and I like you to meet my L300 Hymercamp.
Features;
-build in 1982, sold new in 1983.
-1.6 lpg engine
-4-speed gearbox
-fridge, warm water-boiler, shower, toilet, cooking-stove, sink, heater, solar-panel, extra living-area battery, 4 sleeping places, dirty-water tank, ...
-76000 original km's
-had 4 owners; 2 in...

Hi everyone i'm new here and i have a 1987 Mitsubishi Van that my parents bought after i was born in 1986 and they finally have given it to me. I don't know much about these vans so i'm here to ask for some help. It currently needs a new motor. so my first question is a good motor to replace the existing motor that has a bit more power? something that i could just drop it. well...

Hi,
I need to know if the bolt that holds the timing gear to the crankshaft is right or left thread.
I applied moderate torque as if it is right hand but better check before ramping up the effort.
Can anyone help with this?
Cheers, Al

Hi All

Considering buying an old Delica 1600 pickup, very cheap but a bit smoky. Is it possible to replace the piston rings with the engine in the vehicle? In other words, is there enough sump clearance to disconnect the big ends?

I've done this on a 1800 BMC "B" series engine in a Marina, but the sump was completely unobstructed on those, its a push-rod engine,...

hay any out there if u could tell me i have got a 1.6l 4g32b engine from 82 L300 and iv also got a engine out of starwagon witch i think is a 1.8l (correct me if im wrong) but was wondring do the 1600 heads fit on 1800 block? thanks?

located in melbourne oz.
***linkvan for sale default/liebe011.gif' 'liebe011.gif' />

Just aquired a 1998 Express WA walk-through, brilliant van, just I have no overdrive. The dash light does not come up and neither does the 'D' drive light. The car runs fine, trans works fine. Checked the O/D switch, dash lights, connectors and still nothing. If anyone has any ideas, I would really appreciate it.

Hi. I'm doing up my Mitsubishi 1993 model L300 van for my motocross bike, and I recently put a pod filter on it. When I rev the motor the rocker cover breather hose makes a loud noise. Sounds kindda like an exhaust.

Anyway, to install the pod filter I just ripped the lid off the air filter housing and put the hose straight onto the filter, and i removed the old standard filter so my...

Hi Does anybody know how to replace hydraulic cam lifters (tappets) on a 4G63 engine?
Is it a major difficult job?
Thay are little round thingies which fit into rocker arm above tappets.

link

http://enviroimports.com/technical_downloads.html

hey guys

has anyone ever done a 308 conversion on a l300? also it is posible to get it engineered in NSW??
thanks mitch

hi y'all! just got new 17" wheels for the bus - Y2K Space Gear. How do i lower the suspension? at this height even 22" wouldnt be enough for the wheel arches default/tongue.gif' 'tongue.gif' />

anyway what i really wanted to know is can the centre radio...

Hi guys i got a 98 model L400 and just wondering on the stud pattern and offset for the rims as i want to put some 18s or 20s on it. eg wat cars would have the same stud pattern and offset. any help would be great. cheers guys

Just got a 4d56 put in my 96 express. Belts making a squeeling sound on start up till warm.

How Do i adjust them?????

in the meantime i am gunna rub some soap on it

Hi there, has anyone changed the windscreen on a 1992 pajero? I was wondering how hard a task it is, as i was quoted £785 by auto glass! I have changed one before on an old vw, but i know some vehicles have them like cemented in or something, any answers?? thanks guys!

Hi, I need to know what cam belt I need for a 1993 L300 2.5L Diesel. Can anybody help me please?

HI I have a 4G32 in my L300 (1.6) and its kinda slugish so I wondered if enyone knows where to find high compression pistons.
I would appreciate every idea thanks

Hi people,

I'm doing up a 1992 MWB L300 (take a look!) and one of the items needing replacement is the front seats.

Does anyone know what other car seats fit without modification?

Cheers,
JamitGZE.

I am a desparate delica owner whos motor will not get through a test because of brake pedal creap down but it was good on the rollers:( I have tried everything new seals in the master cylinder, new seals in one front caliper, new front pads and even the local mitsubishi dealer cant work it out default/blink.gif' ...

hey guys newbie here,
i just boought a 94 model express.i want to do it up and just looking for some ideas.some pics would be much appreciated.
cheers!! default/beer.gif' 'beer.gif' />

I am checking out a Deilca for a friend of mine it went by a mechanic to change the gearbox and it has come back without the reverse ligths working so i was wondering if anyone has any pics of which swith it is on the gearbox that controls the lights and possibly the wire diagram to go along with in case i have no choice but to run in a switch i will post a pic of the vehicle so as not have it...

Hi,
Can anyone please tell me what diff ratio a 92 MWB 2.4 manual 2WD van would have. Is there a specification resource out there.
Cheers Al

hello pple

new on this forum, big fan of the starwagon van, was wondering if any of you know if there is an lsd available for the starwagon van, looking for more traction, was thinking the early starions had an lsd, or maybe some of the l200 utes or even mitsubishi pajero, has anyone actually fitted an lsd to there van? if so what did you use and what problems did you come across? dont...

progress pic on the pimpt starwagon..

modifications include..
new 17" wheels n tyres
new green/black w gold pearl paint
debadged, seamless front, completly straight all round
lowered 100mm
pioneer ipod stereo
2x 4" splits
2x 6"splits
2x 6x9s
2x 1000w amps
2x 15" subs
exhaust tip shortened and angled
baby...

Hi,

I was going to change the front right park light of my Mitsubishi Express L300 1999 van today, but could not find how to get access to the bulb to make the change. Does anyone have any instructions or diagrams (from a workshop manual maybe) that would help me get this 'small' job done? Appreciate it.

Graham

Hey there, wondering if anyone can confirm the temp setting of the thermostat for a 2.4 petrol delica should be 82deg C? Have heard that some run a 88deg C thermo and feel this may be why my van's temp gauge is closer to Cold than middle o the road. Have replaced thermo and temp sender. Gauge registers but stays in low range.

L300 4g64 Petrol 2.4 1992

Hi guys and gals, I was driving to work the other morning and when i applied the brakes, i could feel the brake pedal slowly going to the floor when i hit the brakes. It doesnt do it all the time, but i would say every 6 or 7 times the brakes are applied. Would the booster be causing this?? as there is no sign of fluid under the car, and the resivoir is full. Any help would be appreciated. James....

OK folks, new scanner up and running, and glory be... it scans to PDF files which are much clearer than the photo variety and enlarge much better too. The paper quality of the manual is on the poor side. Please be patient with your requests as I am on dial up at present and they often do not transmit for several attempts due to large file sizes. Fair use - Please specify the pages you...