hi

i bought a 2and hand Mitsubishi SPACEGEAR EXCEED 1994
2.8l 4wd
it is 200,000,km atm

i want to ask ,does anyone have same car as this and how many km it can run.
it seems 200,000 km is too high . i want to know how many km it can run average
so i can decide how many years i am going to drive this car

hi guys

im looking into putting a 4g54 motor into a L300 2WD van and wanting to know besides engine mounts what else is needed?

will the 4speed box fit behind it or do i need to fit a 5speed

and if i fit a 5 speed is there any tail shaft modifications needed or is it the same length?

any help would be appreciated!

Hi,
Help please,
Recently we had a nice lady run into the back of us and we are having trouble getting hold of a rear bumper bar.
the garage that is doing the repair says its an accessory and they are unable to get one.

is there anyone who could help?

please advise

Hi all,

I am driving an mitsubishi 2.5 L300 motor van. When i started driving about six months ago, the van giving out too much black smoke when it start off from the red light traffic and also on the road.
The first time, they cleared my injection pistons as it could be blocked. After sending it to service on the black smoke for the second time, It look fine after 1 or...

Hi ,

as a perfect newbie here,
i didn't find a topic about how finding out my engine's type... default/whistling.gif' 'whistling.gif' />

so i might need a hand default/beer.gif' ...

I have my 1985 L300 in pieces and the body is off. Been through the front end and fixed what needed fixing or replacing like F&R shocks, LH side top control arm and bushes, CV boots, ball joints, tie rod ends and replaced the rear spring packs.
Cut the rust out and plated it, lucky it was underneath as I am no panel beater! Done a bunch of other small jobs and it has been well worth...

My 1992 Delica 4X4 turbo diesel automatic (4D56 engine, V4AW2 box) is giving me "A/T temp" warning in normal urban drive. Everything seems to be ok, gearbox behaviour, torque converter slipping, ATF cooling system (oil to water + oil to air), gearbox strainer, new ATF fluid. I suspect the temperature switch to be faulty. I checked it with an accurate thermometer and it goes on at 85...

just new to this guys so hi all i'm driving an L300 express 94mod and i'm poping in a vr-4t engine into van as well so if anyone has done this would be great to talk to you ...thanks default/beer.gif' 'beer.gif' />

Hi eveyone i have just purchased a delica 1995 spacegear can anyone help me with parts need .
Thanks Martin ( uk)

Dear all

I am driving Mitsubishi 2.5L Diesel Van. I was told by the Car Workshop (Quite a few) that this particular van got a design fault in the oil pump. There is nothing to be done on that. This oil pump causing my van to emit black smoke.

After servicing, the van still emit black smoke. I told the car mechanic to change the air filter, fuel filter and brittle valve. Still...

Hi all,
have just got me l300 back in the world of the living - just, but have a serious problem with my carb. Just one tweak too many me thinks, unreversable so consequences are - Coughing, spluttering and pops at idle speed. It is fine once you open it out. Wouldnt mind the pops an that except its an auto box an it insits on dying on me when she's in drive and i'm stagnant at a...

OK i dont know what this part is called and i need help to id it, i have an 1997 express with the 4g63 engine. The radiator fan has a flange that bolts directly onto the pully system that drives the power steering and alternator. The section i need to id is the part that connects the flange to the fan as the fan has come off and i cant see how its connected to repair it. There are matching grooves...

Hello
I would like to buy a l300 4x4 for 500 $ and when I tried it, we passed 4wd to 2wd and after that we heard a big noise. We think that it passes in two driving wheels but not correctly, a problem around the clutch??
Is somebody know where it can come from? Is it possible that the
Thanks.

Geni' ...

2950] Hi Everyone, I just bought a 1991 Delica Starwagon p35w and it has a separate user control in the back seat to control the head unit.
Does it have an amplifier that could be causing the noise?
or is it the head unit that is cooked.
Looking forward to your input,
-Kerry

hey guys,

on the look out for a evo 1 - 3, needingone for my van conversion.

anything thats de-reg'd, rusty, rear/side impact and still is a runner would be perfect.

thanks JP

Has anyone rebuilt their power steering box?

My box is leaking from the top (where the steering shaft enters)Ive removed the top case and inspected the seal, it does look poo, I just rang the power steering specialists, They said a new seal kit is $70. Thats not bad...however the guy said that 90% of the time its not the seal.. its the hard chrome on the shaft itself... and a new...

hey guys

i have a l300 cyclone 2.4 4G64 now im having a few probs, firstly the motor has done around 350,000 km and is ticking, light smoke from exhaust.temp on dash hardly moves at all as well.the plugs are black and dry, uses a bit of oil as well other wise she pulls well through all the gears. sitting at 100km/h it sits at 3600rpm and i don't get manny k's to a tank of gas a...

I don't know if any of you remember all the problems I've had with my van.. well I got sick of it, and gave it to the mechanic and just said "fix it".

(1990, 2L L300 4wd)

Well.. $7k later.

Engine Recon, including head and rods (head was cracked, one of the rods was bent.)
Recon'd Carby.
New 2 Core Radiator.
Recond...

Hey all, first time posta..

Got 1989 L300 Sportpac, Japanese import.
Head gasket went and motor too tired to fix, (380,000KM + about 120,000 with broken speedo cable).
Replace motor with 1994 equivalent 4G63 SOHC 2.0lt
All good... BUT...

Starts fine, runs fine. Then warms up, Idle speed increases, sweet smell of burning Glycol (antifreeze) out the backend.

Hi guys,
i put a 1.8 motor and gearbox into my 92 l300 but having a few problems with the gear box as everything is on the oppisite side.
anyone have any idea's on how to fix,cables dont match up need some sort of adapter or...............
bloody thing

cheers
mark

Hello all.
i'd like to firstly thank conanofcimmeria for his reply to my last posting, all points you advised on had either been checked or have been logged in my brain (hopefully for future ref:) thanks again for your valued input.
I'm pleased to inform member's that the problems are sorted, i put the problems in the hands of a very good auto electrician & he was worth...

[FONT=Arial][SIZE=7][COLOR=blue]
Hello all.
the original problem still persists + more, now the oil level warning light is also on,
i've changed the oil & filter, changed the fuel filter but the dash still looks like blackpool eluminations when driving (or not as in my case). i spoke to a gent at my local dealership who insisted the problem was being caused by either the...

Guys... Im swappin everything over from the rusty van to the new one... now the new van was auto.. so im doin the conversion... its almost done... however the shroud around the gear shifts dosent want to come off... seems to be held on by some kinda glue... cant see any welds.. anyone know how i can get this off?

Incase your confused.. its the metal housing hump that the gear knobs...

Need help setting the timing on a 99 Mitsubishi Starwagon WA

Any pics or information would be greatly appreciated.

Thanks

Jason

Hey all,

If the wheels on my van have been oversized, do the gear ratios need to have been changed?

Caleb

Bought another 84 4x4 for parts (bargain, and it has great spares) however the owner told me the 4x4 function dosent work.. Ive stuffed around with it a bit.. I cant get it to work either, It's fully engaged ok, everything looks fine... but no 4x4... now where should i start? Would it be the hubs? or maybe a transfer case? I have the spares to replace both... but dont want to waste my time.....

Hi-

I'm a total new guy, but am looking to purchase an 84 L300 4wd.
It is 1.8L petrol.

Yeah I have checked the other posts but was hoping for something more specific- does anyone have experience with this type van?

Specifically what have you found the fuel consumption to be like??

It;s either this or a hiace for me... so any help would be much...

Looking for a replacement motor plus turbo to fit 1989 Delica

Hello all, got a slight problem with warning lights being on whilst driving,
charge light & fuel filter lights both on. Have changed fuel filter but no joy, has anyone got the answer I'm looking for?

Does anyone know if a 250cc dirt bike, fit in de back of the van or can you get a cople of then in there
if so ill do it up default/thumbsup.gif' 'thumbsup.gif' /> [COLOR=red] default/thumbsup.gif' ...

Does anyone know if there is a manual for the diesel version of the 4x4 delica starwagon, 1987-1990 will do it, is the engine available in anything else like the pajero?? I think the engineis a 4D56?
Much appreciated.

If anyone has one... please PM me... must be in good condition... thanks!

Guy's... Im fitting the 2.6ltr Astron into my 4x4 L300 (1984).. what flywheel and clutch will i need to run? The L300's or the astrons?

The reason i asked... is i bought a Sigma 2.6 clutch kit today... and it dosent fit my flywheel... so im assumed the flywheel was from a L300.. however a mates old L300 clutch dosent fit either... what have i done wrong? Ive probally just...

RIght, so as many of you may know I bought this van and everything pretty much that COULD go wrong HAS gone wrong.

So, instead of bothering with it all, i've just taken the thing to the mechanic (after the starter motor also died) and said. "Fix it."

Haha, so, i'm getting an engine recon, starter motor overhaul, carby overhaul, radiator overhaul, and in a...

After removing the disconecting the drive shaft from the rear differential coupling I see a large diameter (30mm) bolt. I tried to remove the bolt with no results. I am in Siberia Russia and I need to get the rear differential seal changed out. Is there a secret to removing this bolt or do I just need an impact wrench?

My Speedo has just stopped working, what would be the best process to determine what the problem is? I checked the gregorys manual but it seems to be one thing thats not covered..

Any ideas?

2568]

Rear differential bolt after removing the drive shaft coupling. How do I remove this 30mm bolt is there an internal retaining pin of some kind?

(please reference photo)

where do I find discount parts for a 1999 l300?

i am just wondering ig you need to take the crankshaft pully wheel off to take to the cover off in which to expose the cam belts on a 1997 L300 2.5 Diesel Turbo

Thanks

Hi there can anyone assist me in changing my rear leaf spring and bushes - can anyone give me the basic steps to repair. many thanks

Just wondering if there was much difference in the engines throughout the years.. looking at getting a 1983 reconditioned engine put into my 1990 L300 4wd.. did anything change or should it be an easy job?

Hi all you experts,

I'm another new member and I have been learning a lot just reading all the posts on the many and varied topics and I have a question.
I own a 1984 L300 4WD and I'd like some clarification of what the vehicle identificatin label says. The details are as follows:
Model - 1035GWFR8
Engine - 4G62
Trans / axle - KM147 4875
Color.trim...

hi guys!! default/' '' />

im wondering if you guys know whats the ticking sounds after i start my 2.5 dsl l300 vv it goes off after awhile i also notice that it affect my electrical system

also can anyone guide about replacing alternator is it ok to...

Hi, I am new to this site and just wanted to ask a question about my recently purchased l300 which is a 1982 model with a 2.6 sigma engine in it.

I would like to know if there is a direct replacement fuel tank available which is larger than the 50 or so litre tank that I already have. Preferably from a wreckers.

It's either that or carry 4 or 5 jerry cans which take up...

I have a friend who has 1989 2l auto L300 Van. Do any of you gurus know if say an 1800 Galant engine & transmission will go in without big modifications, or anything else for that matter. My friend has no workshop, so whatever is done will be done the old-fashioned hard way, we welcome any advice on this matter, thanks, Mike Broadbent. Auckland, New Zealand.

Hi All
My Manual transmission in my 1985 L300 express (2WD with the 4G32) is starting to go on me. I am looking to remove the KM131 and replace it with a KM135. Has anyone tried this and is it a simple bolt in job?

If not, what 5 speed would be easiest to bolt in ?

Talk to you soon!

hi all just brought a starwagon and cant find any ancor points?
the ones you need for car seats
do i need to get a crib bar ?
cheers
richard