Opening this new topic in order to share with all outy turbo Owners some interesting info as of the outy turbo total improvement, ie engine tuning (including intercooler front mounted), remapping of the ecu, brakes upgrade, total exhaust system etc.
Starting with a photo whithout the front bumper to evaluate whether it is possible to fit an ix evo intercooler or not:
...

Hi,
I have a 2003 outlander awd. It is coming due for a timing belt. Most dealerships by me want Aprox 475 for the belt alone to 800-900 including the water the pump and accessories belt. I am a good mechanic but not by trade. I am having trouble locating a manual for this truck. I would like to be able to view the procedure somwhere if at all possible.
My question is: is it worth doing...

JRM-racing now offers tuning for Outlander. Pls check jrm-racing.se

They know offers tuning where they use the originl ECU and via service outlet actually overwrites original software.

Really shorter spool-up and better response, much more HP as well.

Approx 250 Hp with std exhaust and 400 Nm, step 2 is more upgraded software suitable for full flow...

Because existing sources of auto reliability information left much to be desired, in late 2005 I started conducting my own reliability research at . TrueDelta reports absolute stats like "trips to the shop" that make the differences between cars much clearer. Results are updated four times a year, so any significant changes in a model's reliability become apparent quickly.

Hey all, im new here and i really only came on to help out my mom. She has a 2003 Mitsubishi Outlander and her air conditioner isn't working. It goes for about 5 min after initial start up of the day, then starts blwoing hot air. It will randomly starts blowing cold air again at random times of the day. It gives no warnign or anything it just does it. Also the "A/C" button...

Hi All -
Recently, my Outlander has started draining the condensation from the A/C into the passenger side foot area. I suspect the drain is plugged or kinked for whatever reason. But since it doesn't drain properly, I can't find it.

Can anyone point me in the right direction? Also, if you've experienced this before, what did you do to fix it and how can I prevent it...

How many faced the problem with the front brake discs deformation?
(Wheel shaking while pressing the Brakes).

Guys,

need recommendations on aftermarket cruise controls / tempomats which have been succesfully fitted in Outlander Turbo and need to know where to buy it. Or at least please point product you think should fit my car.

Waeco is producing cruise control modules, for electonic accelerator pedal (Outlander equipped with one) and for some specific CAN BUS vehicles (still in...

Hi

I've got a UK Outlander (2.4 Mivec auto) with the factory fitted/approved Pharos LPG system - anyone else here got one?

I'd like to know what size the LPG tank is and what sort of range it should have?

thanks!!

edit should have added for info: LPG said it was empty so filled up yesterday - only 20 litres (£10 ish). I would have...

I did the brakes on my 04 Outlander today. It was fun and easy. There is a right and a left rotor. I also added a 1" wheel spacer to widen the track. Painted caliper bracket with alumniblast and the caliper with lastblast. Rotor was already powder coated silver.

I am looking for part simmilar to steering wheel hub adaptor.

I am quiet tall and I miss the 2-axis steering wheel adjustment. I am 190cm tall thus I have to move the seat to max rear position for comfortable pedals handling. But when my seat is in the rear position I have to put the seat backrest to almost vertical position to be able to hold the steering wheel. With hands staightened...

the tyres on my 2004 outlander are just about done, so i'll be needing 4 new tyres within the next month or so.

Stock tyre size (on stock alloys) are 215 /60 /16.

My question is that if I change to a bigger tyre eg 225 /60 /16 or 225 /65 /16 will this effect the accuracy of the speedometer (which is already in accurate - indicated 70mph is 63mph on GPS)

I...

does anyone know if the speedometers can be recalibrated? mine is way out at indicated 70mph - GPS shows as 63mph.

any info appreciated!

hi guys,

has anyone taken off their roof rails? if so, how? i'm planning to take it off when we have our trackday two weeks from now since reducing driver weight will be next to impossible (LOL!) and i'd like to remove what i can from the outie. thanks!

Hi all,

During my 72000km service the dealer noticed that my drivers side rear wheel has some play (you can wiggle it very slightly). His recommended fix was to replace both drivers and passengers side upper control arms in the rear suspension. His quote was $700. The warranty on that part expired at 60000km. This ticked me off a bit. I'm sure the problem was diagnosable...

I have a 2003 Outlander all wheel drive model.
Lately the rear suspension, rear wheels, are tilting in. Top towards vehicle.
Is there a fix for this? I did see a half moon adjuster on a sway bar. Does this adjust the wheels out ? Any help would be most appreciated.

the keyless remote i have is from original factory, but it isnt the 2 button type which have "lock" and "unlock" buttons

the one i got has 3 buttons, "lock & unlock" both on 1 button, "trunk" button, and a "stop" button
press "lock & unlock" + "trunk" = engine remote start
press "stop"...

Hi. I have a 2003 Outlander that was involved in an accident. I like the 05 Outlander lights. The projector ones I believe with the circle glass in the headlight. Will they fit my 03? Thanks.

Hi to all!
This is my 1’st post in Outlander / Airtrek topic.
My name's Robban and I live in Sweden.

I've just bought a Outlander Turbo 2005, I’ve had it for a week now.

I'm interested if anyone of you in here has heard about if some motor-tuning is to be available soon?
As I understand Mitsubishi has fitted a de-tuned version of the Lancer Evo...

7440 & 7443 plus flank LED's for side markers. These LEDS are actually very bright, I purposely underexposed this picture so you could see the actual LED. Also added a 7 ohm resistor in parralel with signal LED to keep blinker rate at proper frequency. Got them from ebay from warden_jp2002.

Hello All,

My fiancee is having a strange issue with her 03 Outlander and I thought i'd come to the experts for a little guidance so I hope you can help. As I said, she has an 03 that tends to make a loud droning/humming noise as the speed increases. The noise usually begins around 50 miles per hour. Once we hit 65, it generally subsides. The performance doesn't seem to be...

Hi all! default/57.gif' '57.gif' />

Help me, please. default/beer.gif' 'beer.gif' />

I've Mitsu RVR '98 4g63t N73W. Engine like outy turbo.
my...

Sending a description on how I did to convert the stock halogen into Xenon on my Mitsu Outlander Turbo 2007

I bought two kits, one 50W xenon high power HB3, one standard 35W H1. Both kits from xenonkungen.se through laitis in Luleå. The HP3 (9005) is on High beam, the H1 is on low beam. 4300K on both kits.

Note that the philips lamp guide is wrong regarding bulb types,...

If you plan to have a "hook" in the back side to be able to drag caravan or smtg (sory fror my bad english. Here are the color codes from the tail lights.


Black : Masse ( Ground ) ( - )
now comes the 12V + :

Green+white = parking lights ( standlicht ) ( pozitie )
Green = brake light ( brems licht ) ( frana )
Green+Blue = turn...

Does anyone know if the Aitrek & Outlander have the same suspension system?

hello!!
anyone know if its made some drilled/slotted rotor's to the turbo version??

default/beer.gif' 'beer.gif' />

I changed the end-links on my front sway bar it helped but I was still getting that clunk-clunk noise whenever I would go over the slightess little bump so today I decided to change the front saddle bushings(OEM Part # MN100250) on the swaybar. Only one bolt (front driver side) was hard to get at because of a power streering hose that runs just above the head...

found the outlander manuals on the internet via google

so perhaps someone else enjoys the finding default/' '' />

cheers


...

Nevermind, found out what I was looking for, thanks default/tongue.gif' 'tongue.gif' />

I have a 2003 ls outlander and it seems the panel lighting where the controls for the fan, ac/heat and venting are all out. Is there anyway to get back there and replace these bulbs/led ? I checked the fuses they all seem to be ok... In addition the ac/heat control knob sticks, I think it may somehow be related. The Mitsubishi dealership I went to wanted $893.00 to remove dashboard sections....

I'm considering buying a 2006 Outlander with AWD. I occasionally go off-road in the desert. Does anyone have an idea how well the 2006 Outlander's AWD is suited for loose desert sands? Does it have limited slip differentials, traction control, or some other kind of locking that would prevent it from getting stuck in the sand?

I was wondering if some parts are interchangable between the different years.

I'm almost positive that blacked out 03-04 headlights will work with an 06, but not quite sure. This is For US spec Outlanders.

I want blacked out headlights with my white outlander and wanted to know if there were difference between the headlights.

A quick search on the forums didnt...

Just wondering if anyone has thought of doing this and if they've done any research on it?

Whats the difference in mounting the tranny (if they are different) and other parts needed? such as a transfer case and axles?

I wanted to do this conversion, but need to know the difference.

default/beer.gif' ...

Anyone get the new recall notice?

Looks like they are having to replace the electric fan cooling module again. I got mine 3 days ago...good thing too because the cooling fans starting running constantly about a month ago.

I would start the car and the fans immediately would come on and stay on. Then run for about 30 seconds after you turned the engine off.

Im thinking about some bigger breaks for my outy.. Does any breaks from any evo fits.. I need calibers, disks and pads.. I know evo 9 dosen't fit.

any one?

hello!
finally got my car back today!With dynopapers,open k&n air filter and forge BOV,standard exhaust...

252BHP and 380NM...nest is exhaust upgrade and make a closed area to the airfilter and add cool air there!..

a totally NEW CAR default/57.gif' '57.gif'...

2.4 Outlander Petrol/lpg auto

Does anyone find that their exhaust gives out smoke when the engine is idling and has warmed up but the air temperature is low, say 5C or less? Smoke seems same as given out during engine warm up.

At first I wondered if it was the LPG having a higher water content in the exhaust which was condensing out at low air temperatures but I...

Is it possible to put a turbocharger on a 2006 outlander? Or can I swap a 4g63 into it? Are there any kind of websites that would be helpfull to me?

Ok,
I'd like to "upgrade" to some nice LED lights for my flashers, etc. But it seems I will need to change my flasher relay (to do with the LED reuiring less power, so the relay thinks its broken).

Problem is, I can't seem to find it. When I turn the hazards on I follow the clicking to a fuse box down by my feet, but it appears to be "IN" the box (as...

Someone helps me!, already change the recall piece of cooling fan control but still overheating the engine, any recomendations please! it's a 2003 mit outlander with 47K miles

I have a 2005 outlander its labrador black and silver. Does anyone know what name of the silver is? I need some touch up paint. Is it Medium Silver Metallic (cladding) or Effect Gray Pearl Metallic Clearcoat. Paint code is X42A, no mention of the other silver color.

Thanks
Mike

I have an 03 Outlander, this issue just started. If the car gets below 2K RPM the oil light will go on. Once I accelrate past 2K the light goes off. I figured oil was low and I was do for an oil change so got it done but light still comes on. Any idea's on why the light onyl comes on under 2k? Bad sensor? Thanks

hi

anyone know the speaker sizes for the front & rear speakers? (I have a UK 2004 equippe model)

I'd like to replace them as they arent very good, i have upgraded the head unit but the speakers are limiting the sound quality.

Very slight leak coming from the drain plug on the oil pan. I'm not sure why. Does the plug come with crush washer that I may have lost? The engine is the mivec 2.4L. I change my own oil, so unfortunately I can't take it back to the shop and have them "make it right". It's on snugly, I've double checked. Not had this issue on other cars, thanks. ...

hello guys!!

how is it to fit a dump valve in the outlander turbo?
i hear it is a recycle system on it,will this be a problem?
and a company tells me i maybe have to get a dumpvalve with twin piston specially for the EVO engine..

anyone has a clue?...

THNX default/' ...

Hi folks,

I am sorta new to these forums. Has anyone found or know of any upgrades for the stock stereo/cd player for the 2006 Outlander?

I can't seem to find anything online with the # that's on the front of the deck (u090).
Mitsubishi hasn't been much help either.

Any Ideas? I am just trying to save a little money.

Thanks,

Hello,

I have an 03 outlander. The check engine light came on and the BRAKES PLUS shop said it was the Cat converter. Forutnatly the dealer covered it due to 80,000 mile warranty on it.

Now, I'm getting another check engine and the code says 'system too lean (bank 1)'

Here are some questions:
Is this related to the cat being changed? If so, anyone...