Hi. I have a 2003 Outlander that was involved in an accident. I like the 05 Outlander lights. The projector ones I believe with the circle glass in the headlight. Will they fit my 03? Thanks.

hello!!
anyone know if its made some drilled/slotted rotor's to the turbo version??

default/beer.gif' 'beer.gif' />

I changed the end-links on my front sway bar it helped but I was still getting that clunk-clunk noise whenever I would go over the slightess little bump so today I decided to change the front saddle bushings(OEM Part # MN100250) on the swaybar. Only one bolt (front driver side) was hard to get at because of a power streering hose that runs just above the head...

found the outlander manuals on the internet via google

so perhaps someone else enjoys the finding default/' '' />

cheers


...

7440 & 7443 plus flank LED's for side markers. These LEDS are actually very bright, I purposely underexposed this picture so you could see the actual LED. Also added a 7 ohm resistor in parralel with signal LED to keep blinker rate at proper frequency. Got them from ebay from warden_jp2002.

Because existing sources of auto reliability information left much to be desired, in late 2005 I started conducting my own reliability research at . TrueDelta reports absolute stats like "trips to the shop" that make the differences between cars much clearer. Results are updated four times a year, so any significant changes in a model's reliability become apparent quickly.

Nevermind, found out what I was looking for, thanks default/tongue.gif' 'tongue.gif' />

I have a 2003 ls outlander and it seems the panel lighting where the controls for the fan, ac/heat and venting are all out. Is there anyway to get back there and replace these bulbs/led ? I checked the fuses they all seem to be ok... In addition the ac/heat control knob sticks, I think it may somehow be related. The Mitsubishi dealership I went to wanted $893.00 to remove dashboard sections....

I'm considering buying a 2006 Outlander with AWD. I occasionally go off-road in the desert. Does anyone have an idea how well the 2006 Outlander's AWD is suited for loose desert sands? Does it have limited slip differentials, traction control, or some other kind of locking that would prevent it from getting stuck in the sand?

JRM-racing now offers tuning for Outlander. Pls check jrm-racing.se

They know offers tuning where they use the originl ECU and via service outlet actually overwrites original software.

Really shorter spool-up and better response, much more HP as well.

Approx 250 Hp with std exhaust and 400 Nm, step 2 is more upgraded software suitable for full flow...

I was wondering if some parts are interchangable between the different years.

I'm almost positive that blacked out 03-04 headlights will work with an 06, but not quite sure. This is For US spec Outlanders.

I want blacked out headlights with my white outlander and wanted to know if there were difference between the headlights.

A quick search on the forums didnt...

Just wondering if anyone has thought of doing this and if they've done any research on it?

Whats the difference in mounting the tranny (if they are different) and other parts needed? such as a transfer case and axles?

I wanted to do this conversion, but need to know the difference.

default/beer.gif' ...

Anyone get the new recall notice?

Looks like they are having to replace the electric fan cooling module again. I got mine 3 days ago...good thing too because the cooling fans starting running constantly about a month ago.

I would start the car and the fans immediately would come on and stay on. Then run for about 30 seconds after you turned the engine off.

Im thinking about some bigger breaks for my outy.. Does any breaks from any evo fits.. I need calibers, disks and pads.. I know evo 9 dosen't fit.

any one?

hello!
finally got my car back today!With dynopapers,open k&n air filter and forge BOV,standard exhaust...

252BHP and 380NM...nest is exhaust upgrade and make a closed area to the airfilter and add cool air there!..

a totally NEW CAR default/57.gif' '57.gif'...

2.4 Outlander Petrol/lpg auto

Does anyone find that their exhaust gives out smoke when the engine is idling and has warmed up but the air temperature is low, say 5C or less? Smoke seems same as given out during engine warm up.

At first I wondered if it was the LPG having a higher water content in the exhaust which was condensing out at low air temperatures but I...

Does anyone know if the Aitrek & Outlander have the same suspension system?

Is it possible to put a turbocharger on a 2006 outlander? Or can I swap a 4g63 into it? Are there any kind of websites that would be helpfull to me?

Ok,
I'd like to "upgrade" to some nice LED lights for my flashers, etc. But it seems I will need to change my flasher relay (to do with the LED reuiring less power, so the relay thinks its broken).

Problem is, I can't seem to find it. When I turn the hazards on I follow the clicking to a fuse box down by my feet, but it appears to be "IN" the box (as...

Someone helps me!, already change the recall piece of cooling fan control but still overheating the engine, any recomendations please! it's a 2003 mit outlander with 47K miles

I have a 2005 outlander its labrador black and silver. Does anyone know what name of the silver is? I need some touch up paint. Is it Medium Silver Metallic (cladding) or Effect Gray Pearl Metallic Clearcoat. Paint code is X42A, no mention of the other silver color.

Thanks
Mike

I have an 03 Outlander, this issue just started. If the car gets below 2K RPM the oil light will go on. Once I accelrate past 2K the light goes off. I figured oil was low and I was do for an oil change so got it done but light still comes on. Any idea's on why the light onyl comes on under 2k? Bad sensor? Thanks

Sending a description on how I did to convert the stock halogen into Xenon on my Mitsu Outlander Turbo 2007

I bought two kits, one 50W xenon high power HB3, one standard 35W H1. Both kits from xenonkungen.se through laitis in Luleå. The HP3 (9005) is on High beam, the H1 is on low beam. 4300K on both kits.

Note that the philips lamp guide is wrong regarding bulb types,...

hi

anyone know the speaker sizes for the front & rear speakers? (I have a UK 2004 equippe model)

I'd like to replace them as they arent very good, i have upgraded the head unit but the speakers are limiting the sound quality.

Very slight leak coming from the drain plug on the oil pan. I'm not sure why. Does the plug come with crush washer that I may have lost? The engine is the mivec 2.4L. I change my own oil, so unfortunately I can't take it back to the shop and have them "make it right". It's on snugly, I've double checked. Not had this issue on other cars, thanks. ...

hello guys!!

how is it to fit a dump valve in the outlander turbo?
i hear it is a recycle system on it,will this be a problem?
and a company tells me i maybe have to get a dumpvalve with twin piston specially for the EVO engine..

anyone has a clue?...

THNX default/' ...

Hi folks,

I am sorta new to these forums. Has anyone found or know of any upgrades for the stock stereo/cd player for the 2006 Outlander?

I can't seem to find anything online with the # that's on the front of the deck (u090).
Mitsubishi hasn't been much help either.

Any Ideas? I am just trying to save a little money.

Thanks,

Hello,

I have an 03 outlander. The check engine light came on and the BRAKES PLUS shop said it was the Cat converter. Forutnatly the dealer covered it due to 80,000 mile warranty on it.

Now, I'm getting another check engine and the code says 'system too lean (bank 1)'

Here are some questions:
Is this related to the cat being changed? If so, anyone...

Does anybody know is it real to install momo steering wheel (evo 7-8-9) on outlander?

in the night I cannot see anything, all my lights are broken. I mean, there is no light on air , controls ,vent, ashtray , or heating seat controls . how do i remove the panel to change the lights ? I read , after removing the air bottons , there are some screws, i cannot find them, here is the pic:
THANK YOU !

I got a 2001 Mitsubishi Airtrek 2.4 GDI.
Recently I got a check engine light, connected my ODBII scanner and got the following code:

P1035 - O2 Sensor Heater Circuit

This I am told is a failure of Oxygen Sensor 1 at Bank 1

Does anyone know where I can find this sensor on the car?

...

Don't get me wrong when my Outlander works well I love it, it's the best riding vehicle I've ever owned and I've had 17 GMs from Citation to S10's and full size chevrolet. But it seems to me that suspension parts keep going bad prematurely on my Outlander. It was wearing tires inside in the back had to replace dogbones now it's wearing tires inside in the front and both...

I have a 2003 Outlander all wheel drive model.
Lately the rear suspension, rear wheels, are tilting in. Top towards vehicle.
Is there a fix for this? I did see a half moon adjuster on a sway bar. Does this adjust the wheels out ? Any help would be most appreciated.

Hi everyone, well my question is does anyone know if the Airtrek Rear Assay will fit on a regular Lancer 1994. I have a Fwd lancer and i would like to set it to a Evo III, is it the same suspension setup?
Does anyone have any spec drawings of the rear assay for the Airtrek? I will change the engine and the gearbox with the rest of the rear suspension.

Than ...

Hello! I recently got these H4 bulbs which I was going to put in my Outlander. Upon further inspection, I find out that these bulbs don't fit with the plug!

So I was wondering, what do I have to do to fit these H4 bulbs into my Outlander?

Thanks! And hope you can help! default/thumbsup.gif' ...

Hi guys!
I am after chrome set for my Outlander 2006. This includes side mirror cover, door handles, headlight cover, tail light and fuel tank lid cover. Anybody knows where to get them online and stores?
Thank you.

does anyone have a pic of a 1st Gen outlander with additional spotlights (after market or OEM) on the front?

thanks

Alright guys this is something new I am trying. Like the title says its a contest that will be voted on by your peers on this forum.

Follow the link read the instructions and I'll do the rest.

I hope to see all of you participate.




~Eric
EMC 3000GT...

Hi

I've got a UK Outlander (2.4 Mivec auto) with the factory fitted/approved Pharos LPG system - anyone else here got one?

I'd like to know what size the LPG tank is and what sort of range it should have?

thanks!!

edit should have added for info: LPG said it was empty so filled up yesterday - only 20 litres (£10 ish). I would have...

Just wondering what people were getting per liter or gallon?

So far my outie is performing a little under for what is rated for....im getting 6.6 litter per KM or 15.7 mpg?

What are some things to improve the MPG that have to do with the engine.....or car itself....?

thanks

Since this seems to be an Int'l Forum, just wondering if anyone has any information on availablity of any aftermarket (beefier) Sway Bars aka Stabilizer Bras aka Anti-Roll Bars?

The OEM items seem like token stuff... so wimpy... only about 10-12mm thick (guesstimation, I didn't actually measure it)

I reckon before I start to do suspension mods, controlling the...

How do i disconnect the daytime running lights in a 06 outlander. I cant figure it out...

Has anyone put a Evo engine into a 1gen outlander ?
also has anyone installed a Super AFC2 into a US spec outlander?

I thinking of doing the swap. but worried about the computer problems, plus the evo has a chip in the key for theft reasons. so, im thinking i will need a complete donor car to make this work.

any input from u guys and girls...........

thanks...

Hi,

Does anyone know the specs of the Airtrek turbo?

e.g. the turbo on the Evolution 7 GTA is:

Turbo = TD05-15GK2-9.0T
Nozzle Area (cm2) = 9.0
Turbine = Inconel (steel alloy)
Compressor = Aluminium, 65mm wide

and on Airtrek:

Turbo = ???
Nozzle Area (cm2) = ???
Turbine = ???
Compressor = ???

I've...

yow wad up every one ... i'm from Jamaica and i just purchae a mit Airtrrek tubo r... i need to find out if there is any one out there that can tell me about the different types of modification that can be done to it....

Hey there!

I just found out that I have a leak in the front left CV axle. I'm told it costs $800 for the part. Has anyone else had this issue with an Outlander?

Thanks!!

I have Mitsubishi Outlander 2003. Sometimes my fans turn off making my engine overheat. I would like to know is there is a recall on that by Mitsubishi. If not, I would like to know where I can buy the fan engines. I live in Puerto Rico (USA), so it have to ship here. Thanks...

Hi, when I put on my emergency brake, it goes all the way up to the console. Anyone know how to adjust it? thanks

06 Outlander

Is it possible to fit a towbar to a 1993 outlander??

grtz
Arjan

Hello all,
I owned an Airtrek Turbo (2003) for about 5 years already. So far problem free. Just need regular oil changes, ATF changes, tyres etc. The car is JDM spec,. meaning max speed is limited to 180 km/h. Recently I removed the speed cut, by reprogramming the ECU. The car can go beyond 180 km/h. But the speedometer only indicated max about 190 km/h. Is there any speedometer (European...