It looks like a really odd question but I've been searching on-line for a couple of days already and didn't find anything. All I need is simply a rear passenger side splash shield for my 2003 Lancer ES. I could easily find front ones (both for driver and passenger sides) for about $17 but could never find rear ones. Tried various on-line stores including Ebay but to no luck =(
 |
|
|
2 |
Ilya |
80 |
15th April 2008 - 03:28 PM
Last post by:
Ilya |
guyz i have 05 lancer auto that i just wrecked yesterday.. very sad.. air bags went off and stuff.. but i also own a 1998 mirage if the engine in lancer is ok .. u think i can swap it on 98 mirage? with tranny and every thing? what would i have to do exactly.. both are automatic.. will it be easy? hard? ( does the engine look ok in pic radiator is agasint it.. but still .. do u all think?? it...
 |
 |
|
2 |
oz_mo69 |
270 |
14th April 2008 - 09:43 AM
Last post by:
4g94T_gt28r |
I'm trying to help out a friend who knows nothing about cars. They weren't able to describe the ignition system very well, so I'll go ahead and ask here...
Does the ignition on the 4G69 engine (it's a 2004 Lancer) feature an ignition coil for each cylinder?
Thanks!
R
 |
|
|
6 |
bobiv |
229 |
12th April 2008 - 09:16 AM
Last post by:
bobiv |
So, as i did when i was looking into getting a mkiv supra, id like to know exactly what im paying for before i spend the money. At this stage im looking at getting an early 2000 model lancer, i just wanted to know the exact differences in the following models -
all of the following are mitsu lancers; i should also mention that im looking exclusively for a manual coupe
2000...
 |
|
|
0 |
recked |
108 |
11th April 2008 - 09:40 PM
Last post by:
recked |
Hey All,
This is my first post at the forum, but i've been around reading for quite a while.
Anyway, i've got a 2007 Lancer ES.
I want to do a lot of stuff to my car, eg Body Kit, Lower it, low profile tyes, rims, exhaust, cold air intake, but i dont exactly have the money at the moment, so i'm starting on the small things.
I'm thinking of...
 |
|
|
5 |
vorpal |
156 |
10th April 2008 - 10:19 AM
Last post by:
SteelEvo |
HI,
Today I noticed an erratic noise at idling on my 2002 lancer. I don't know if it is the idling itself or something else. It is cyclic with the idling. And It sounds like 3 normal and one rattle. Like - - - brrr (Sorry I'm not really good at explaining noises with words ;-) ) Also It sounds like its coming more from the left side of the engine.
Oh also It feels like...
 |
|
|
7 |
jobou |
249 |
6th April 2008 - 10:45 PM
Last post by:
jobou |
hi,
i have a lancer 2007.
i need to know when should my radiator fan work. i have 2 fans in my car.
i noticed that they both work as soon as i open the air condition.but when it is off they don't work,do they work only in high temperature.the coolant and motor oil levels are both good. i am worried that they may be something wrong in the thermostat.
the temperature...
 |
|
|
0 |
nadinesaleh |
106 |
5th April 2008 - 08:20 AM
Last post by:
nadinesaleh |
Ok maybe I'm just a NOOB but what does a grounding kit do and does it have any performance gain at all???? Thx.
 |
 |
|
2 |
rallyaz |
161 |
3rd April 2008 - 11:27 AM
Last post by:
qenigma |
im spendin 10000 on my 2007 lancer wat should i do i was considering 18s... already got an exhaust on it..
considering short ram....
wat else ..
gunna do tha stereo.... with all pioneer stuff...
neways hit us back wid some ideas
default/beer.gif' ...
 |
 |
|
10 |
lancer es_1990 |
245 |
2nd April 2008 - 09:14 PM
Last post by:
throttle04 |
Hey everyone im new to the forum and just have a question or 2.
I have a 2003 Lancer OZ Rally automatic..ya i know auto..hahaha,
Well my question is how difficult it would be to swap out the auto tranny and put in a manual 5 speed tranny from another lancer of the same type. I know i would need the tranny, wiring harness, ecu, and the other parts. If this was done would it...
 |
|
|
2 |
mneo8 |
217 |
2nd April 2008 - 03:47 PM
Last post by:
Travis k |
I've got a 02 lancer oz rally w/ approx 118k miles. i know nothing about cars. it has started to hesitate when i accelerate. any ideas of what it might be or should i just kms?
 |
|
|
1 |
acidcasualty |
145 |
2nd April 2008 - 10:58 AM
Last post by:
mfalik |
i have a 97 eclips and i wanted to lower it, i dont know which is better.
Will you guys help me? thank you
 |
|
|
1 |
mind one |
137 |
31st March 2008 - 07:04 PM
Last post by:
Rob |
heres the story.... well i was in the passenger seat drunk as hell after this party...so i let my friend drive me back to his... while driving home my friend said grab a better cd and chuck it in... so i took out the cd and put a new one in .... or so i thought i did this three times... theres a small gap on the top of the cd player that only just could fit a cd into it... and i managed to do it...
 |
|
|
0 |
lancer es_1990 |
131 |
30th March 2008 - 07:35 PM
Last post by:
lancer es_1990 |
Hi there,
anyone have any idea what the degrees BTDC is for my 4G15 engine ('91 lancer CB carbi)? I've been having bad pinging mid-throttle under any kind of load, general gutlessness and a very notable on-cam step up in power after about 2/3rds revs (no tacho sadly).
I checked the timing (couldn't isolate the ignition timing sensor screwed to the firewall though)...
 |
|
|
0 |
mattthemuppet |
233 |
30th March 2008 - 12:32 AM
Last post by:
mattthemuppet |
Hi,
I recently purchased a 1999 Mitsubishi Lancer GLX car, but the owner's manual is missing in the car. It would be really helpful if somebody can provide some pointers as to where I can get one.
Thanks in advance.
Marcelo
 |
|
|
0 |
msandrini |
200 |
27th March 2008 - 09:38 AM
Last post by:
msandrini |
Hey fellow Lancer OZ owners.. i just wanted to know if anyones has ever had a turbo put in and how much it is.. also how much will it be to get foged pistons and connectin rod.. just wanna know labor.. i would do it myself but i want it to be done right, i know people that know how to do it but its seems like i alway get parts that dont fit.. so just wonding about labor cosr thanks people
 |
|
|
0 |
otowndj198918 |
82 |
26th March 2008 - 10:04 PM
Last post by:
otowndj198918 |
Where can I buy a good 4G93 engine? I want to change my old engine. I want to have more power in my lancer............Please help.....anyone.....thanks!!!!!!
 |
|
|
1 |
limeboyvm001 |
352 |
26th March 2008 - 12:26 PM
Last post by:
dallas_family |
Ive seen a couple lancers around that have actually replaced the front grill. I would like to do this and was searching around. Ive seen that they sell aftermarket ones for like 150. Possible to make my own? I know i can get the mesh but the frame looks like it would be a problem.
Also I would like to convert my automatic into manual...for obvious reasons seeing how I cant...
 |
|
|
2 |
Wakeo91 |
272 |
26th March 2008 - 01:35 AM
Last post by:
4no |
Hey i am doing a engine swap in my Pickup Van.. i need the pinout for the ECu. we got the Van to start but the Injectors not getting power to give the engine Gas.
Its a 4g62 Engine Sirrus
 |
|
|
0 |
eyecandi |
175 |
25th March 2008 - 03:53 PM
Last post by:
eyecandi |
Hey guys is there any reason that a 03-05 lancer intake would not work on a 06 or did something change between 05 and 06. And if so how hard is it to make it fit. Thx for the advice
 |
 |
|
2 |
rallyaz |
103 |
24th March 2008 - 07:33 AM
Last post by:
mfalik |
Here's the rules. All you have to do is search through our web site and see how many Easter eggs you can find. Count them all up and email your answer to Sales@SpeedCorps.com The first 3 to email the CORRECT answer will receive $100.00 off of their next order. We can give you one hint, they are NOT in the store portion of the web site. So, hop to it. You only have till midnight Sunday....
 |
|
|
0 |
Crypto |
85 |
22nd March 2008 - 09:16 AM
Last post by:
Crypto |
hey, if you have installed a rear sway bar, do you even have to install a rear strut or a lower tie bar? Ive heard some people say you dont, but what would be the most beneficial thing to do? thanks
 |
|
|
0 |
throttle04 |
99 |
20th March 2008 - 12:54 PM
Last post by:
throttle04 |
Is there such thing as a manual non evo lancer? Have not seen a single one for sale.
 |
|
|
4 |
Wakeo91 |
318 |
19th March 2008 - 07:53 AM
Last post by:
hashu |
Just wanted to thank all the knowlegeable folks on this site. Bought an '02 Lancer ES for my daughter's first car. Of course, had to work out some used car issues like new tires, brakes, and fluid changes. After discovering and reading this forum, I decided to change the timing and accessory belts. When I picked up my car, the battery was dead. A quick jump got me going, and went...
 |
 |
|
3 |
jlatl |
165 |
17th March 2008 - 07:41 AM
Last post by:
mfalik |
Recently bought an automatic 2003 Lancer ES. Ive been looking around and found out about rally racing (since I was looking around at lancers). So im kind of intrested in it now.
default/offtopic.gif' 'offtopic.gif' /> Was thinking of buying a beat up old car thats rear wheel...
 |
|
|
12 |
Wakeo91 |
203 |
16th March 2008 - 10:56 PM
Last post by:
Wakeo91 |
I'm new to the forum, I have a '92 Lancer GLX and can't find much for it so I can't do any serious modding - any suggestions as to where to pick up body kits or engine mods please???
 |
|
|
5 |
demon_driver |
877 |
16th March 2008 - 10:06 PM
Last post by:
Clubman |
Hey Guys,
new on this forums site but im tryna market a turbo kit specifically for the 4g94 motor as well as the MIVEC ralliart lancer.the kit will come complete of course with other options that most kits dont come with. this kit will cost you less than that of other manufacturers.
here are some details on the kit and what it will come with:
Stainless Steel Log style...
 |
|
|
3 |
4g94T_gt28r |
2,151 |
16th March 2008 - 02:21 AM
Last post by:
MishartOZ |
I have a 2002 Lancer ES and ive been looking around the web for a EVO style Hood.
but the only ones i can find are carbon fiber.
not a big fan of that, cars are one color while the hood is another, look.
So im wondering are people painting there carbon fiber hood?
or is there a place to buy an EVO style Hood that isnt carbon fiber?
this place says ultra light hood...
 |
|
|
3 |
K-Ambi |
454 |
14th March 2008 - 10:33 AM
Last post by:
Rob |
Do 05 Lancer have a cabin filter? If so.....Where at?
Mike
 |
|
|
3 |
05Lancer |
191 |
13th March 2008 - 08:50 PM
Last post by:
05Lancer |
Ralliart or Spec V?
i cant decide =[
 |
|
|
3 |
jadoregia |
91 |
13th March 2008 - 08:49 PM
Last post by:
jadoregia |
Hey I'm new to the forum
I have recently become interested in purchasing a Lancer for my first car. I have been reading consumer reports and specifications on Lancers and wanted some first hand recommendations on which make/model is the best to buy.
I am considering the following:
2003-2006 Lancer ES
2004-2006 Lancer OZ Rally
2005-2006 Lancer...
 |
|
|
5 |
taiidanipilot |
177 |
13th March 2008 - 08:43 PM
Last post by:
Shingen |
Alright guys this is something new I am trying. Like the title says its a contest that will be voted on by your peers on this forum.
Follow the link read the instructions and I'll do the rest.
I hope to see all of you participate.
~Eric
EMC 3000GT...
 |
|
|
1 |
EMC 3000gt |
134 |
13th March 2008 - 12:43 AM
Last post by:
EMC 3000gt |
I think the only con about the 2007 Lancer Ralliart are the 4 stud wheels.
Does anyone have any 4 stud wheels they could recommend?
Thanks default/' '' />
 |
|
|
1 |
vorpal |
143 |
13th March 2008 - 12:12 AM
Last post by:
lancer es_1990 |
hi everyone, i owned 2 mitsubishi lancer,lancer GTS 09 & lancer 93 model.
The problem is with my Old lancer 93 model,recently i noticed a lot of white smoke puffing out from the rear exhaust,initially i tought these is normal during early morning hours where the engine is cold,however the smoke dint went away even the car is moving and during in the afternoon where the engine are still...
 |
|
|
3 |
Sogamed |
249 |
12th March 2008 - 08:32 PM
Last po |