hey need some injectors for my 2 g eclipse i dont have cash but can trade a ported 2g turbo manifold with high temp coating. or a 1992 f4a33 auto awd trans.
looking for 550cc or bigger

Hey I'm looking for stock GTS rims with tires in Toronto or surrounding area, even if you are from south ontario i'm willing to drive to your location as long as it's a reasonable distance.

I need a 1g eclipse/ talon bov

Been looking around ebay and such past few days but can't seem to have any luck finding any 08 GTS rims up for sale.
Live in Chicago and made it through the pot hole season fine up until last week and now one of my rims is damaged as the tire pressure drops down to below 25 psi within 2 days of pumping it up to about 32.

Just wanted to ask around since I see that many of you have aftermarket rims put on your GTS's if anyone is willing to sell a rim or 2, hopefully in the Chicago area.

I need 2g Eclipse side skirts. Both sides. All three pieces for each side.

ok im doing a sr20det motor swap on my conquest and i dont need the motor and trans if u want it come and get it runs perfect asking $550 for both

I have a 91 Eclipse GS- Turbo (Automatic). I need:

A sunroof latch with pins

An Idle Speed Control Sensor/Motor

The front lights that go under the headlights

I am located in Belleville, NJ but my car is in Puerto Rico. I can have the parts shipped to either place if needed.

Thanks

I'm looking for either an Evo VII or Evo VIII valve cover. Looking to maybe pay around $100-ish for an VIII, obviously a little more for a VII. If you want more than that, hit me up, we can work something out. I hope you have the plastic plug cover too, but not a deal breaker.

I'm trying to get one for a painter friend of mine to go nutz with in his free time... So he will probably have it for like a month, and I don't want to go without driving my car for that long, and I don't want to rush him, so yeah, just looking to minimize downtime here and I'm not paying $500 for one from the damn stealership.

Hit me up w/ what you have and they price you are wanting. I am in Ohio and am willing to pay for shipping. Please include pics.

ATeresi@woh.rr.com
or Pic Msg to
937-638-2329

Hey there, I have a 4X4 Triton Twincab, "98,am after a bit of Trim, right hand side, Rear, between Brake lights & wheel arch..silvery sorta color, if possible...will happily pay Postage etc......Cheers..Ratt.

Hit me up w/ what you have and they price you are wanting. I live in Arizona and am willing to pay for shipping. Please include pics.

Josh.wallace@tauri.net

ok i think i may beed a good 2g wire harness for the motor. the 1 thats on the car has been cut n what not prior to a 6 bolt swap and i think a few things r still missing. ill also need the fuse bay too if ne1 has the whole thing PM me with price including shipping



32225 jacksonville FL


im not in a rush to get this but id like to have offers on the table so if i do need i have sum inline to get

once again PM me plz dont post to the thread

Thanx

I need a Idle Air Control Valve for a 2001 Eclipse 3.0L
If any one has one new or used please let me know.
Thanks

i need an engine block... doesnt have to have anything but the rods and pistons. or if you have just the rods and pistons i can take just those. any help would be appreciated

font="Comic Sans MS"]im looking to buy or trade for....

a set of (two)

1997-1999 Mitsubishi Eclipse Projector Headlights With Lighted Halo
Black Housing/Blue Projector (see attachment)
[attachment=9892:eclipse_...ghts_big.jpg]
and also
a set of (three pieces)

Mitsubishi Eclipse 95-99 Black LED Tail Lights (Three Pieces)
(see attachment)
[attachment=9891:226692218_o.jpg]

name your price... (im looking on here because im unable to pay the price on ebay... )

text me at (907) 590-7594 no calls on this number please[/font]

Im lookin for the starter plate that goes inbetween the tranny and motor. I need it for a 1990 GSX 5 speed AWD.

I need it fast i ordered one off ebay and he has still not shipped it its been almost 2 weeks.

Thanks, Ryan

ok im in need of the whole intercooler setup from a 2g from intake to turbo. if ne1 has most of this setup let me know and if u live in fl and close to me jacksonville ill give u a fmic in trade. i dont know the condition of it but it has lik 3 inch inlets and outlets idk the brand and its a lil beat up but i think it works fine. it has sum pipin to it but i dont think its the correct piping. even if u dont need the fmic and u have the parts i need let me know a price

Im lookin for a starter for my 90 GSX 5 speed that is in working condition. Let me know if you have one and how much.

Thanks Ryan.

i want to get an 99 gs eclipse hood in good conditions
thanks

Interested in the following items for a 1st gen Eclipse;

Aftermarket Header
Resonator
Port and Polished Head or Low Mileage OEM Head
Tail light harnesses
Rear reflector lights from the side of the bumpers
New or used cigarette lighter assembly
Front and or Rear Strut Tower Bar
Springs and or shock/strut combo
Cold Air Intake

& some spare lug nuts

I'd like to see whats out there. Some cash in hand to spend. Located in the North Carolina area and willing to meet members in this area or have shipped depending on price and distance. Thanks in advance!

I have a complete set of KUHMO tires. I am in need of any tire really as long as its a 205 40 17 and GOOD tread. Thanks

Hello, i am wanting to buy all these panel pieces that are in this picture that are white.the paneles being sold must be non painted so the stock color

I'm looking for any SKS's out there for sale. just give me the year, country, price and condition. thanks.

as the title says i am lookin for a 95-99 gst shell im looking for a good decent body, i dont care if the bumper has a hole. or side skirts as somewhat messed up, im lookin to spend about 500 - 750.

Hit a patch of ice going 50 today spun into other lane (5 over speed limit) and smashed the side skirt and dented and cracked the bumper. If anyone has any laying around I need 1 OEM passenger side skirt or a set of 2 (if not OEM) and a new bumper cover that will fit 1992 Mit 3000GT SL

Thank you very much everyone, first accident ever on my 19th birthday today

im looking for the fog light bezels from a 97-99 2g eclipse.
thanks

Hello,
I need cylinder heads for mitsubishi pajero evolution 1998year MIVEC 3,5l or can buy whole engine.
rimvydas
+37060102232
email: markasus@yahoo.com

I want some hatch struts that will stay up regardless of the temperature.

I need them for a 2g 1997 Eclipse GS. I will buy a set of 2 for $20 or negotiable.

Please respond!

need a good shape 14 for a good price. all i need is the center section no comp or turbine housing

Im looking for stock 2g eclipse door panels that are two toned greay leather and black. The black is around the vent, door handle and switches

WTB exhaust pipe for 2008 Lancer DE GTS ES

I need the OEM exhaust pipe for a 2008 lancer with the 2.0 engine. This is the pipe that starts up front after the exh. manifold and that goes all the way up the to muffler in the back. There is 1-2 resonator on this pipe.

Let me know if you have one. I need this asap.

redgtz@hotmail.com or PM

Thanks!

i was just wanting to see if anyone had a front bumper that was painted the stock purple.

I really need a new cap for my coolant reservoir, I think the one I have now has been warped from all the overheating, it hardly stays put and it leaks under high enough pressure.

hey does anyone have an Apexi SAFC I or SAFCII for sale? looking for around 125-150$. Post in here or PM. thanks

does anyone have any vr4 for sale i hae a friend here in NC that is looking for a vr4 97 or newer. thanks. if u respond give specs.

My 1990 GSX passenger side front knuckle assembly was replaced a couple years ago, but I later discovered the mechanic had tossed the OE dust shield that sits between the hub and the knuckle. I want to restore the shield to the right front.

Naturally, I want one that's in decent shape (a little surface rust is OK, but nothing major please.) With luck, I won't have to buy an entire used knuckle/hub assembly to get it, but I'd certainly consider that. If anybody has something like that lying around, please send me a PM !

Thanks -- Trevor

Somehow somebody managed to hit my RIM in the parking lot without touching the car. This leaves me with a huge gash that I can't stand. I am looking to purchase just one OEM RIM in perfect condition. I think 100 dollars or so with 25 dollar shipping for a perfect RIM is a fair price.

need intake for my RWD project, does not need to be pretty.

thanks,

seeker