I would like to change out the orig steel wheels, keeping the same size.
need to know what other truck wheels will work with that 6-bolt pattern?
Example: early Dakotas, Mazda B2000, Isuzu pup, etc.
any suggestions will be helpful.

Advice Please-
After 32000 miles the tyres on my 2000 Spacewagon 2.4 GDI are needing replacement. The Mitsubishi fitment was the excellent Yokohama A300 Aspec in 195/65/15 94 H size. This tyre is no longer available.
What do people advise for a replacement?

03 galant es camber issues, help!

rocking, tire wear and bad rain performance.

i have eibach pro springs on. claimed 1.5 inch, actual drop more than two inches. tires are way off line. i have justr ordered a camber kit and sway bars to correct problem. is this the wrong fix? will i need to chainge shocks/struts? should i just go and buy the more expensive coilover... and if so will i still need the camber and swaybar i have ordered?

thanks

I have read that Mitsubishi has published Tech-Talk #100 which speaks to a problem with the second generation Diamante rear suspension knuckles. I would really appreciate it if someone with that article would either transcribe the contents as a posting, or scan and post the article. If it is already available anywhere on the web, please direct me to the URL.

Thanks.

Can anyone help me with either an adjustable or lower suspension for a delicia of 94 vintage?

anyone got it? any pics?

Hey i was wondering... i just got 17 inch enkei 9 spoke rims for my car and my old brakes are UGLY!! i was wondering which would be better to do. should i just get brake covers or get all new disc brakes (rear is drum) and get them all disc? what would you guys prefer? thanks!

As you can see i'm a chevy man... I've turned to you guys for some help i'd like to lower an eclipse.... as far as a website i can go to i haven't found much.. what do you guys usually go to?

i cant get the 17mm Bolt loose on my front to remove the spring.. any ideas?

ive gota 2003 lancer es

-Wheel Search chart- http://www.wheelspecs.com/specs/WheelSearch.php -"Fitting Tires & Wheels" - http://www.carcraft.com/techarticles/3636/ -Backspacing issues- http://www.high-impact.net/wheels/backspac...llustration.htm -Wheel Backspacing- http://www.custom-wheels-n-rims.com/WheelT...l-backspace.htm -Wheel Tech Info- http://www.rsracing.com/tech-wheel.html#backspace

Well, I don't really NEED them, i would just like them. So i was wondering if maybe anyone had any they'd like to sell. Preferable 15". I should have browsed first, but i'm lazy and its 4:30am... so..... I doubt i'll get a response, but I just wanted to check before I bought from the shop, get back with me ASAP!


===Sha Sha===

I am looking for 16 in. wheels for my 95 eclipse. the bolt pattern is 5 on 4.5

does anyone have some they want to get rid of for a cheap price?

I recently bought a 97 Eclipse Spyder GS and when i get it up to speed, the rear of the car starts shaking real bad.. it kinda feels like a tire might be out of balance, or something else in the tires.. hoping that is all it is anyway... havent had it to the shop yet.. waitin till the snow melts.. was just wondering if this was a common problem, or just the tires.. they look brand new.



Also have noticed that when I close the passenger door I can hear the window (when its down) slamming around inside the door..

I recently purchased a 97 Spyder GS (no turbo, but i practicly stole it), and im trying to find a good place to get rims and I need to know what size would be a better fit...?

I have practically brand new high performance tires on my 17" rim 2001 eclipse and lucky me got two nails in one of my tires...One of the nails hit square in the middle of the tire so i know its fixable with no problem, however the second nail went in about an inch from the corner of the tire...And im wondering if a plug job would be alright or if a hole that close to the edge of the tire should be totally replaced with a new tire? thanks!

Hi, I am looking at getting a Eterna ZR4 and always wondered why these cars are 4WS, what benifit does this give to the performance of the car and is it really needed?

Cheers,
Fex

For all those who are in need of wheel refurbishment... you may want to check this link out> Amazing Alloys
especially welcoming Evo drivers!!

Greg

I am from Australia and am after info on the GD Galant or similar and in particular on easy brake and engine upgrades.

Down here we had a model called the Sigma in the late 70's early 80's, which was from what I understand a rebadged Galant.

A lot of the parts off this car I believe are similar as well as era cars like the Starion and Scorpion.

Brake and suspension upgrades if you know of any including possible diff replacements would be very much appreciated.

Tha Starions here used 256mm vented front discs, 36mm high, with an 80mm hole on the front. Would I be able to get some stubs from a Starion and do a direct swap, or will this give geometry issues and cause wheel offset problems?

Trev

PS My records show the GD Galant has 229mm diam, 30mm high, 67mm hole.

I got a Mitsu 2002double cab. i want to lift the body a little more. what i mean is a little more gap between wheels and body. what i have to do with it.

Hello I'm new to this site but wanted help from u guys. I'm lookin in 2 lowering my

car i would love 2 get coilovers but it's way 2 expensive 2 buy them so i want 2

buy some quality shocks and struts for my 04 Lancer Oz rally. So if u guys could

give me some websites on where 2 find some good quality shocks and struts i

would b very thankful. Oh and one more thing I'm also lookin for those clear

projector headlights 2. thanks again

I have a 1998 Mitsubishi Legnum STR and i want to buy some mags for it off trademe or the trade and exchange but i dont know what the stud pattern and offset of my car is so i dont know what i can buy!! Can anyone help please??

Hello All, does anyone Have any idea where I could get suspension parts for my 2000 Galant Viento 24

Hi, this is my first time on the forum (so please don't hurt me :-) )

I have a Mitsubishi Grandis (2004 model), and unfortunately, I have lost a couple of hub caps. I want to change over to a set of Mag wheels, but our friendly specialists want to know everything.

In particular....they want to know the Centre and offsets for the vehicle (and are willing to do the measurements, but I have no desire to spend my afternoon tracking around getting the tyre monkeys to kick my tyres).

Is there a handy dandy Mitsubishi Grandis reference guide that could help me?

Regards,

Craig

ALright Lads, greetings from rainy Ireland.

Just bought a Lancer GSR 1.8 Turbo and I want to lower it...

What suspension is everyone using....

Lowering Springs or Suspension Kits, whatever, doesn't matter, just want to lower it.

Anyone know what manufacturers are selling suspension parts for this car.

Cheers

Woz

What is the biggest wheel you can put on a Mitsubishi Eclipse(1998). I'm thinking about buying one. And also can someone help me out with the lug pattern and how many lugs they have? Any help is appreciated. And my friend was wondering if it was possible to put on a 20" rim? Thanks
Jmed

I have a 1998 Shogun, can the upper wishbone rubber bushes be replaced without specialist equipment,?ie;are they pressed in or can you just remove the nuts ,pull the old bushes out and push the new ones in .

Hey guys, just a quick question, or after suggestions anyways. I've got a CH 2.0L lancer, evo8 kit on it, it has a 2" mandrel bent system on it (which i dont really want) and extractors, thats all so far. Im just wondering what are some of your suggestions for mods on a budget, not extremely restricted, but u know what i mean. added performance without having to turbo it. things like exhaust and ecu chips etc etc.. i'm open to all suggestions, all will be appreciated.
cheers guys.

I m a new member, just got a second hand car 2003 Lancer it is like a new one...i am trying to learn more about my car & how i can add few mods. I'm seeking to buy some 16" rims for good price.anybody have any suggestions....

CAN ANYONE HELP ME IN SOME INPUT TO GET MY DIAMANTE TO BE MORE OF A SPORTS CARS?????

I WANT TO LOWER IT... WHAT WILL I NEED TO DO????

I WANT MORE POWER...TURBO? SUPERCHARGER???
NITROS?????

I have a 2000 LS, I bought it, drove it off the Lot in 2002..... had it ONLY 1 hour..
And then WAAAMMM!... a Jerk wreaked into me.
I then Replaced the 2000 front Clip with a 2003 front Clip...
It Looked Bad ASS.... I also Did Not use the Red Star emblem on the front Nore the Crome around the Black mesh Grill..

Now, I want to CUSTOMIZE this car a Bit more.
Is there any Sport Springs out there that will FIT?
Any Motor Mods...?
Im looking at using 18 Inch Wheels for the car next.
So Anyone out there that could Help...PLEASE DO!





JEDI

Hi, i am a regular member of this forum... i have an eclipse.....I want to lower it. i am also concerned about the car safety.... what risks factors are involve in lowering the car.