hey all... i really need to know the offset on the Oz Racing wheels that came on the lancer velocity models...

cheers all 4 your help

Hi there. Is there anyone that can help me with a prob that I have on my '04 shogun elegance. I have a prob with the steering on the car witch seems to pull to the left while driving and also feels very jerky and unstable. I have been to the main dealer but they say that nothing is abnormal at all with the steering suspension roll bar etc. Anyone shed any light on this issue????????

thanks.

I'm looking at getting some Toyo Proxes 4's for this summer but everywhere I look they're really expensive. My buddy got new tires for about $60 bucks each last summer, a total of $300 including shipping, but he cant remember the website he got them from. Does anyone know of a website where I can get my tires for really cheap, or at least a good reduced price? I'm in college so I need to save all the money I can.

I got brand new Alloys hyperblack w/ chrome lips 18" for sale , im selling it for very cheap, genuine buyers hit me up and i'll email u the pics . thnx

Hi Can anyone assist me in fixing a lower than low verada I replaced the component in the boot nothing the car started with front end down then the back last is this the sensors and if so how to check maybe the compressor not working anyway any idea would be nice

THANKYOU

I need to know what type of Konig Rims these are. There 7 spoke black and silver 17's thats about all I know, Any help I would greatly appreciate thank you

I have a set of 17x8.5, 6 spoke rims from a 3000gt. Will they fit on my 1999 Eclipse with or without spacers? If they won't fit I need to sell them.

Thanks, for any assistance.

Does anyone no of a site or some place in texas that carry's 2001 Eclipse Sub Frame, with all bushing's and what not thank you

I let a friend drive my car and he bent alot of *** by hitting the curb, He is helping me pay for the stuff he bent all except for the rims...I was planing on getting new ones anyways... I just have a question, does anyone know of a site with good prices and warranties on there tires i.e. if I get a flat would they replace them, and also what are some good one that you think would look good on this car? Im up for suggestions, Thanks a bunch

have anyone here done a disc brake conversion to the rear brake of a 2001 lancer sedan ? or does anyone know of a place to do it ?

Just want to know what it is and what offset could you go to?

Like the title reads i want to lower my car but can't find a good company that i know of that carries springs for my car. I was curious other model are interchangable or what i prefer eibach or tein but neither of those companies offer lowering springs for my model.

Steph.

hi, new to forum, second post today.

have '95 eclipse rs, upgraded 14" steel rims to '01 style 10 spoke, liked the look and wanted 16's.

noticed that one of my wheels has a cracked spoke. does anyone know if and/or where i can get this repaired? i can find one to replace it but i was quoted $125 and i only paid $200 for the set.

appreciate any and all comments

the engine is a 4G93 and it's really old. i don't have the owner's manual and nothing is really shouting brake fluid at me so help.

thanks

I have a 1998 eclipse rs, and I need to replace all 4 of the strut mounts. Every time I search for the parts at different parts places I can find the parts but two different types pop up, a 4 piece mount and a 1 piece mount. I was wondering if anybody knows what the difference between the two are? Is the 1 piece just a pre-assembled unit? And will it work on my car?

HI, i recently Got Some 17" Alloys for my 96 colt, and it just generally vibrates sometimes when driving? any ideas on why this might happen?

Just thought i should mention the drum brake screws on a colt are NOT countersunk.

Therefore i had to buy new screws and sand them down to smooth the wheel face flat, otherwise the wheel would be angled when it went on, im not sure if this is related though?

Any Ideas people?

Hello,

i have a 03 CG -LS lancer and wondering if the 03 VRX CG stock suspension will fit?

thanks

Hi, do you known which is the precise offset on a Eclipse GS-T 96?
, this car have a 205/55 R16 rims 16x6” 6jj 5x114.3mm (5x4.5”),
The offset are within 35 – 45mm

I want to fit a 245/40 R17 on 17x8.5”, and the offset?

Thanks,

I was hoping that someone out their could recommend a decent set of front and rear strut mounts for a 1998 eclipse rs.

Can anyone help me i have a 1985 NB pajero SWB do i need to change much to fit a 3inch body lift has any one done this before is there much work involved thanks for ya help cheers.

What do you guys think are better, or what would you recommend?


I live in upstate NY and we have some crazy winters sometimes. Im looking at getting winter tires. Reading alot and hearing somethings I hear good things about Blizzaks and not so much about the X-Ice even thought the X-Ice gets some descent ratings on some sites.


X-Ice vs Blizzak ( WS-50 / WS-60 )



I like how the 50's look beefy and the 60's replaced them but they dont look like they would eat up the snow as well. Any insite into these tires?


Thanks

Any ideas on good tyres?
I currently have BF Goodrich 33/10.5/15 AT's on and they will need replacing soon.
I am looking for a tyre with good mileage as well as grip, at a good price.
How do the BF's compare to Pirelli and Goodyear?

Regards
Jacques

I recently purchased an 04 Eclipse Spyder GS; however, the vehicle had no owners manual, nor did it have the sticker in either door jam or by the gas cap. Any thoughts on what the correct tire PSI should be? 16 in wheels; current tires have a max psi of 44.

or from which car can i get it off of. could i get of 2002 galant.

has anybody shopped on http://www.wheelguyz.com/ before??
are the quality of their products good?? are their prices reasonable?

i just installed 2" drop springs all around on my lancer. the problem is now the rearend sways back and forth. why is this and how do i fix it. i double check and everything is tight.

I just bought replacement sway bar link kit and was wondering if it is an easy to replace on your own. Any one have any steps on how?

Hi All, I have just got an FTO that has 18" wheels 210/45 18 Tires and at present am guessing at pressures... does anyone have any idea on what pressures I should be using?
Any help appreciated.

I've got a 10-2003 Space Star and would like to fit 17 inch wheels. Wich ET wheel en wich size tyre should I take? And are there other adjustments I have to make?

Thanks,

Sjaak

can anyone help or has anyone had the same problem , i have a 2001 3.0v6 shogun sport automatic and despite repeated visits to the dealer it still has a shudder/vibration through the steering wheel. the wheels have been balanced numerous times the tyres have been replaced and rotated the wheel bearings have been changed and nipped up again the ball joints have been replaced both top and bottom, but still the dealer cannot sort the problem i am spending quite a lot o money on this carto rectify the problem to no avail can anyone help or provide any info regarding this problem.

I need some help recommending tire sizes for my SWB Pajero. The 265/70R15 I currently have on are only avaialble by special import. I need to change to a more common size. Any suggestions?

what will i need to do this and what is the best way and does anyone roughly know what it would cost?

Hi guys,

Just a quick question - I own a 1994 Ford Fiesta with four-stud Fox alloys which a Colt owner wishes to purchase off me . Would anyone happen to know if they will fit the Colt? they certianly don't fit a P reg Fiat Punto as I found last week!

Cheers

Alright, I just bought a 1997 Mitsubishi Eclipse GS-T Spyder, and the mileage is fairly high. I know that it needs new suspension, but do not know WHAT I need. I have been looking at KYB shocks and KYB struts, but do I need shocks AND struts? Please help!

Hi all again, I have bought a car and have discovered that there is no key to take the 4 locking wheel nuts off, any suggestions on how to take them off? I have tried whacking a socket over them but there is a metal sleeve which runs around the actual locking nut, any reply is much appreciated, regards ian

I've needed to swap my tranny out on my 97 Eclipse GS for a while now, and I was thinking that it might be kinda cool to have a rwd car. Would it be totally impossible to take a GSX tranny and take out the fwd and redo the suspension on my GS to have a rwd car? What would be involved? Cost? Would it be entirely worthless?

My friend is offering to give away his stock tires & rims for a BMW 5-Series (16 inch).

Would it be possible to put these one my '01 Galant?

Thanks in advance.

what are the best springs to put on an eclipse to lower it. also if i lower my car what all is needed

hie there, i was planning to change my tyres n rims... what tyre brand should i buy for a 17" rims? i'm confused as there are lots of brands... and 1 particular brand i know to not buy is "antyre". any other tyres?

Plan on installing KYB shocks and a Eiback Pro-Kit spring kit.Do I need to get a camber/alignment kit for this setup? Its only sposed to lower my Galant around an inch. Thanks

Hey guys, I just signed in to this thing so i could get as much help as i could in modifiying and fixing my eclipse. I just got into an accident and bent the 18" rims i had on so i put 14" stock rims on and i've had to repair alot of suspension items. here's my question tho: when i went to get my alignment done , the guys said i needed basically 1000 dollars worth of stuff done to it to adjust the camber. i knew he was taking me for a ride so i told him just to adjust my toe, and not the camber because he said he couldn't adjust the camber without all these parts. if i buy front and rear camber kits myself, will that be able to adjust the camber? i'm not spending a grand on a bullcrap claim from "bob's wheel alignment" (no joke, that's the business name). if you guys could let me know what to do without having to raise it up with stock springs and all that jazz that would be great. thanks

I hear these are good shocks/struts to use with the Eibach Pro-Kit I just got for my 99 GTZ. Where can I get the best price? Are there any group buys planned?

Hey guys, just wondering if anyone knows / has D2 adjustable coilovers for the CH Lancer?

I'd really like 2 get some A.S.A.P if they do.

Cheers!

I went to Discount Tire to buy some larger rims for my 99 eclipse RS and they told me that the largest rims I can have on my car are 14"ers. I'll do whatever it takes to fit bigger rims on. What can I do? Any information would be much appreciated.

I went to Sears and they charged me $15 for a brake evaluation. How do I know if what they are saying is true? Does anyone here know how to read the brake analysis? I know I need brake work because I have vibrations in the steering wheel at 50 mph as well as when I hard brake. Also, my brakes usually squeal right before the car stops (at lowest speeds like when I am parking). But still, knowing you need brake work does not mean you know how MUCH brake work. Is this a $100 job, $300 job, $500 job, or $750 job?

Here's the brake analysis Sears gave me.

For front pads, it said "mfg min spec" for pads is 079, and my pads are actually 180 but the comments were "suggest front pads pitted, hardware".

Regarding my rotors, it says "machine to" 880 but that my actual is 922 right and 916 left. "Runout" spec is 002 but actual is 009 right and 012 left; the comments were "Required front rotors hard spot". For my bearings, it says "nondrive" and "pressed".

For my rear brake shoes, it says "mfg min spec" is 039 and mine are actually 130 right and 128 left. The comments were "Suggest shoes pitted"

For my rear drums, "machine to" is 8071 and my actual is 8008 right and 8008 left. "N/S" for "runout spec", actual is 005 right and 001 left. My bearings are "nondrive" and "bolt on hub". Comment on the drums is "suggest cut drums, pitted".

Does anyone know how to interpret this? How do I know they're not just trying to upsell me on a brake job that I don't need? Can you tell from this information what I really need to do versus what I would ideally do if I was a millionaire?

They told me to replace the front pads and rotors, replace the rear shoes, use new hardware for the brakes, replace brake fluid, and service the emergency brake.

ive got a flat because of a big leak in my front right tire and i have 19 inch axis rims. the model of the rim is crux... well i have the center cap covering the lug nuts and took out the bolts with the alan wrench but cant figure out how to get the cap off... i wuz up at school with at leas 10 buddies of mine and nobody could figure out wat was up... its still up at school right now and i need to get that tire off as soon as possible...

what would be the best way to store wheels/rims for the winter.

any replies would help thanks..

(.if it helps i have the enkei rsv gunmetal.)

will these wheels fit on my car

18x7.5 with +45 offset

i put them on and the back right is rubbing and i need to know if it can be fixed

does the brand of rims matter? have any 1 heard of the brand "Osaka", is it good? if i use my old suspension n just compress it for a low ride, is it safe? as in advisable to do it?