 |
 |
Topic Title |
Replies |
Topic Starter |
Views |
Last Action |
| Announcements |
 |
|
Announcement: The Offical 2nd Hooters Meet. |
- |
EMC 3000gt |
9419 |
--
Last post by: EMC 3000gt
|
| Important Topics |
 |
 |
|
5
|
gevo |
4,416 |
9th April 2010 - 04:00 AM Last post by: chain rattle |
Workshop manual for 96-2000 spacestar.though much will be similar on the 2000 onward model so still useful if you dont have a 96-2000
http://www.sendspace.com/file/da159vLEt me know that it works cause this is first time ive put anything on sendspace
| Forum Topics |
 |
|
|
2
|
jamurray |
48 |
21st July 2010 - 07:31 AM Last post by: jamurray |
My wife has a 2000 1.3 GLX petrol model, and something odd’s happening with the parking lamps. They just wouldn’t turn off unless you took the two 10 amp fuses out of the engine compartment fuse-box

.
Another odd symptom is that, when you turn on the headlamps, the dash-lights don’t dim like they’re supposed to.
When the light-switch was in the off position, and the two fuses were put back in, the lights remained off for half an hour or so, before magically turning on again (the switch was still off).
I left the two fuses out for a couple of days, before going back to it. This time, after the fuses were put back in, the parking lights don’t work at all.
Has anyone got any bright ideas as to what the problem could be?
I’ve got the wiring diagram and workshop manual download, but they seem a little short on information, so I can’t figure out whether it’s to do with switches, relays, or whatever.

 |
|
|
1
|
karxarias |
2,796 |
4th July 2010 - 11:17 AM Last post by: techie |
 |
|
|
5
|
Nigel Smithson |
177 |
30th May 2010 - 07:23 PM Last post by: Nigel Smithson |
cancelled
 |
|
|
0
|
goggs1980 |
67 |
1st May 2010 - 09:02 AM Last post by: goggs1980 |
hi there i have just bought a space star on a x plate 2001 and have noticed there is a pin hole and a good bit of rust on the oil sump could any one tell me what other engine or car model i could take it off ie what other modles have the same engine i have the 1300 engine many thanks hope you guys can help
 |
|
|
1
|
Ahmed Nalla |
182 |
24th April 2010 - 04:14 PM Last post by: bumpn |
hi, I just got my wife a sace star, but the seller didn't leave the manual in the glove box. any help?
 |
|
|
2
|
ricky411 |
146 |
24th April 2010 - 06:04 AM Last post by: Nigel Smithson |
Hello, I'm new to all this and not very mechanical minded.
My 2003 Spacestar 1.3 manual has developed very loose gears, it goes into gear ok but has lots of play in each 1.
Is there a quick fix for this?
I'm also now getting a rattle when turning slow corner which sounds like the drive shaft, could this be related?
Thanks.
Ricky
 |
|
|
1
|
Starfall |
109 |
7th April 2010 - 02:13 PM Last post by: loz |
Hi all

this is my first post. I purchased a Silver Space Star Diesel for my dad 2 months ago from a garage in Blackburn lancashire on a 53 plate. I drove it home to Glasgow and i must say i am very impressed with the drive the comfort the economy and the torque. It has been doing very well until yesterday it would not start so i left it for 5 then tried again but to no avail. My father came out to try it and the same again. I then tried again and it started! so off i went to the shop but when i came back out the same thing happened again until it eventually started. The battery is as strong as an Ox so no problems there. To me it feels either fuel related or electrical. If anyone could be of some help it would be very much appreciated. PS: The car is a one owner and was serviced about 4/5 months ago and has 48.000 mls on it.
Many thanks in advance. Regards. Starfall
 |
|
|
2
|
Thedoc |
162 |
2nd April 2010 - 12:36 PM Last post by: Thedoc |
I'm going to fix the door locks but I noticed that if I turn key in front left door it opens only that and the rear one of the same side, same behavior of the right front door. Is it normal?
 |
|
|
3
|
Thedoc |
61 |
31st March 2010 - 12:42 PM Last post by: Nigel Smithson |
I tried to remove the rear door panel, but I wasn't able to remove the manual window handle, I can't see any bolt, some help?
 |
|
|
4
|
Nigel Smithson |
313 |
30th March 2010 - 06:40 PM Last post by: Nigel Smithson |
Some digits were missing segments off my multi function display. I took a deep breath and re-soldered each of the many pins along the top edge of the circuit board inside it. After a couple of attempts - problem solved! It seems that the original soldering wasn't the world's best quality and some of the solder joints had become dry over time. This has of course saved megabucks.
 |
|
|
0
|
lesb310761 |
86 |
28th March 2010 - 12:39 PM Last post by: lesb310761 |
my di-d eqippe 2002 cuts out..its a fuel problem.when gauge reads between 1/4 and 1/2 it will cut out.if i put a gallon in and prime the system away it goes..obviously its taking air in.but where and why at a certain level..and no the tank isnt empty..can any1 help please
 |
|
|
4
|
Nigel Smithson |
175 |
15th March 2010 - 04:39 PM Last post by: Nigel Smithson |
My 01 X reg Space Star 1.8 GDI auto ticks over at nearly 2000 rpm. I've tried disconnecting the battery for several hours then leaving it on tickover for 15 mins. I've also cleaned out the throttle body (although it wasn't carboned up). When I unplug the MAF sensor the engine slows down. Does this mean that the MAF sensor is shot, or could there be some other problem? I can't find an idle air control valve anywhere. I'm baffled!
 |
|
|
0
|
Joglo |
57 |
15th March 2010 - 10:40 AM Last post by: Joglo |
Apologies for posting a problem query as my second post here.
My OBD tester reads a PO135 fault, which I know is a front CO sensor fault.
Have changed both front and rear sensors for new ones, but not OE.
MIL stays on, showing PO135 error.
A complete CO test shows no running issues and that everything is working perfectly in that department.
I've cancelled out the fault with the OBD tester at leat six times, also disconnected the battery twice for 20 minutes and discharged the power by switching on headlights during that period.
MIL stays on, showing PO135 error.
Any 'useful' help would be appreciated.
Vehicle is an 02 Mitsi Space Star, 1.6 gasoline fuelled
NB: My best guess is that the computer doesn't like the non standard front lambda sensor, but for some reason hasn't complained about the rear one yet.
 |
|
|
1
|
karxarias |
446 |
4th March 2010 - 03:28 AM Last post by: Spikas |
Hello !!!
I have a spacestar and i have a problem with the clock.On the disaply unit i see a CT sing and i believe that is the the problem that my clock display the wrong time.It goes about half an hour forward .Can anyone help me to switch off this CT sing? thanks!!!!
 |
 |
|
1
|
bmcws |
242 |
11th February 2010 - 07:21 PM Last post by: SRSONE |
Hello!
I've an 03 1.6 Space Star and the Engine Management Light has come on after a fill at a petrol station that will remain nameless! Is there any way to find out why it's come on, without going to a dealer? The car has also recently clocked over 18000: does the warning light come on if it expects a service (outside the 3 year limit, so I assume it would cost quite a bit to get a service)? Can I connect an OBD II interface or something like it to find out why it's complaining? I'd rather spend a little more on a standard interface than pay someone to find out!
Cheers for any info!
 |
|
|
4
|
fox1983 |
499 |
26th January 2010 - 03:54 PM Last post by: gepa6 |
i have a did space star and wondered if its men to have side skirts on it as i have seen a few with them on but mine doesnt.
 |
|
|
0
|
lars39 |
579 |
30th December 2009 - 10:56 AM Last post by: lars39 |
I have just bought a Space Star 1,3 GLX 1999. In order to throubleshoot the electrical system I am looking for a Wiring Diagram covering this model.
Does anybody know where to buy such a diagram om paper or CD?
Steff
 |
|
|
0
|
markh29 |
67 |
18th December 2009 - 05:32 AM Last post by: markh29 |
Hi
the rear passenger door on my spacestar 1.3 1999 has jammed shut, is there any way to take the panel off to get to the mech with the door closed?
I have tried different methods to open the door, the catch isnt coming all the way up either
Any help greatly appreciated
Mark
 |
 |
|
3
|
khalidrad |
1,348 |
18th December 2009 - 05:27 AM Last post by: markh29 |
Hi
I am new to the forum and joined after search in googles. The reason is that the rev. needle of my mits. spacestar (1.8 equipe petrol) is fluctuating and ocassionaly engine stalls while waiting in long ques or on traffic lights etc.
I have been told to replace the throttle body which is a very expensive business.
Is there any alternative?
Thanks
khalidrad
 |
|
|
3
|
fullerlee |
89 |
15th December 2009 - 05:00 PM Last post by: SRSONE |
I have a 2004 Space Star Diesel.
The Indicator (both left and right) is not automatically cancelling. I'm guessing it's a mechanical issue somewhere under the steering wheel.
Has anyone come across this before? Is it an easy fix?
Thanks,
Lee
 |
|
|
1
|
IRCA |
53 |
16th November 2009 - 07:24 PM Last post by: terbearfsho |
Hi Folks,
My driver side seat belt is stuck and won't retract - I can't figure out how to remove the trim without damaing it and also not sure what can be done to fix the Seat belt... Any advice would be appreciated!
Details: Space Star 1.3
Year: 2000
Thanks for any assistance you can provide.
 |
|
|
2
|
mickekarl |
155 |
13th November 2009 - 02:34 PM Last post by: mickekarl |
If you are going to buy spareparts on the internet I will give you a big warning for:trademotorspares(Interparts Ltd) !!!-I ordered new rear discs,but after 2 weeks,when I asked them where they where they e-mailed me and demand me for £20 for postage and packing(I already paid what they told me to do)
When I e-mailed them and said that I not longer was intressted of the discs,they said that they should refund me.THAT WAS 2 WEEKS AGO!
A BIG, BIG WARNING FOR THEM!
mickekarl
 |
 |
|
2
|
bruno lind |
267 |
22nd October 2009 - 09:37 AM Last post by: bruno lind |
my space star 1.3 has now 200.000 km on the clock and i think its time to change the fuel filter - but i cant find it... been looking from the gastank all the way to the fuelrail but i cant see any fuel filter.
can anybody here tell me if there is a fuel filter on this model?
i dont know if there are different spacestar i different countries - but my spacestar is from denmark!!
greetings from the cold denmark
 |
 |
|
0
|
bruno lind |
63 |
22nd October 2009 - 04:23 AM Last post by: bruno lind |
my space star 1.3 has now 200.000 km on the clock and i think its time to change the fuel filter - but i cant find it... been looking from the gastank all the way to the fuelrail but i cant see any fuel filter.
can anybody here tell me if there is a fuel filter on this model?
i dont know if there are different spacestar i different countries - but my spacestar is from denmark!!
greetings from the cold denmark
 |
|
|
1
|
ksh64 |
355 |
9th October 2009 - 12:51 AM Last post by: bazD |
hi
my dad has a 'T' reg petrol 'star which ran fine until the battery died.since having a new battery fitted,it stalls quite regularly at low speeds.we have tried disconnecting the battery for 12 hours which improved thing slightly for a while .has anybody else had this problem and cured it.
 |
|
|
0
|
yanto |
276 |
31st August 2009 - 12:35 PM Last post by: yanto |
i have just picked another one up now have 2 a 1999 and a 2000
both cheap because they cut out and run lumpy now i have seen them advertised saying needs injectors
they don't have injectors
if you remove the plastic cover of the engine and the large rubber pipe from the air box to the rear of the engine you will see this

undo the 2 fuel pipes the wiring plug and 4 bolts remove and presto this is your problem top pic is the other side of the unit
next pic is the inside of the manifold


clean it all of with wire brush on a drill etc use a hoover to get all the dust from inside
bolt it back together and its like new stick some carbon cleaner from halfords etc through the fuel system
 |
|
|
1
|
shearer27 |
151 |
25th August 2009 - 05:07 AM Last post by: RonnayBarkay |
I have messed up my girlfriends CD/Radio and I'm in the doghouse so your help would be much appreciated! She owns a '54 plate Mitsubishi Spacestar 1.6 equippe and I took the faceplate off the stereo the other day put it back in and now the centre lcd display says 'lock' and I can't remove the faceplate or turn the stereo on - much to her annoyance!
The Radio serial no. is: ME35804709E070C
Another code on the side reads: M5X8MMMAX
The VIN code is: XMDLNDG3A4F037224
How do I unlock the stereo/faceplate and input the code?
Hopefully you will be able to help me as my ears are starting to hurt from all of the bashing they are receiving from the missus!!
 |
|
|
0
|
catfink |
245 |
13th July 2009 - 12:43 PM Last post by: catfink |
Hi there, I hope someone can help with some much needed expertise!
A week last Saturday, I bought a 2003 Space Star (51,000 miles on the clock) for £3000 from a second hand car dealer. After a little while of driving it about I noticed a tapping noise from the front, rang the garage and they said, bring it back Friday and we'll have a look at it. Anyway, on the Thursday I was driving back from the supermarket, just pulling on to a roundabout, when I lost all gears and couldn't move anywhere. The AA came, and towed me back to the garage where I bought the car. The AA man said my drive shaft was broken.
The man at the garage said yes, the drive shaft is broken, its "gone" in the middle and not at the CV joint. He said he would repair it under warranty for me (he has given me 3 months warranty). The next day, the Friday, he phoned me and told me that the drive shaft is a special size and that he can't get it for 3 working days, which means this Wednesday.
I found out (after handing my money over, typically) that this garage has got quite a bad reputation for bodging cars, and I'm wondering if anyone can tell me any way I can tell if the works been done right and not just bodged up? Also if theres anything else I should look out for on my space star that could be a problem? My other halfs dad said that the engine sounded fine, nothing wrong there (I hope). Are there any questions I can ask the garage when I pick the car up that might give me a clue if he replaced the drive shaft with a new one or a second hand one, or would that matter?
Such a shame because I was really pleased with it.
Just one other question, should I have the cam belt replaced? its a 1.6 if that makes any difference
Many thanks in advance
 |
|
|
5
|
Alsim |
1,737 |
12th July 2009 - 12:44 AM Last post by: trustgain |
Right... I have installed a new battery and since then i have had problems... engine stalling etc. Yesterday the engine cut out and my yellow engine dash light was flashing and there was also an audible bleeping sound. I turned the ignition off and it started again. The acceleration was erratic as if there was a fuel issue!
Now this morning it won't start and the yellow dash light is flashing again!
Anyone have any ideas please??
Cheers, Al
 |
 |
Sales
any sales threads here ?
|
0
|
Archangel |
68 |
24th May 2009 - 04:06 PM Last post by: Archangel |
Have a towbar with ball and electrics for SpaceStar diesel on 53 plate .
want £50 ono for it , anyone interested? Its a witter bar.
 |
|
|
1
|
ronsthings |
208 |
31st March 2009 - 11:28 AM Last post by: galwayboy |
Hi there,
Hope someone can help, the clutch on my Space Star has started to slip noticeably in 2nd and 3rd gear. I do most work on cars myself but I've never needed to work on a clutch before. Does anyone know if it is just likely to need a new clutch or would it be worthwhile trying to bleed it or replace the cylinders first?
Any advice would be much appreciated, I've found this forum useful in the past particularly for cleaning the throttle body to solve an idle speed problem it had when I bought it.
Thanks, Ronnie.
 |
|
|
0
|
galwayboy |
85 |
25th March 2009 - 03:28 PM Last post by: galwayboy |
Just fixed the wiper today, the aluminium part of the wiper motor body that sticks through the rear window was corroded very badly, and moisture had travelled down the shaft and the shaft seized, hence the slow speed and finally the arm stopped. I put lots of grease onto the motor shaft, also I had to rub emery paper on the shaft to free it out, and then put the lot back together again.
I am leaving this thread here to hopefully help anybody who encounters the same problem.
GALWAY BOY
 |
|
|
0
|
galwayboy |
64 |
24th March 2009 - 02:30 PM Last post by: galwayboy |
Hi Loz, I see you also drive a diesel space ster. Have you had any problems with the rear wiper motor, I think mine is shot, I have not take the motor out yet, maybe at the week end as work is keeping me busy. Any reply received with much thanks.
Galway Boy
 |
|
|
0
|
galwayboy |
69 |
24th March 2009 - 12:16 PM Last post by: galwayboy |
Hello ,
I own a 1.9 turbo Diesel and the rear wiper has stopped, the arm moved up the glass about 3 inches and stopped there, just want to know if anybody has had that problem, the car is coming up to 5 years old, and do you think the manufacturers warranty covers the wiper motor etc., also it seems very difficult to remove the plastic panel on the rear tailgate,door,
Thank you Galway Boy
 |
|
|
2
|
Mitzi |
313 |
18th March 2009 - 12:11 PM Last post by: SRSONE |
Well my beloved "Mitzi" encountered problems, she is a 2004 SpaceStar and up tillnow has been running perfect and in many respects still was when she went in to get "fixed" XD.
A rather long exhaustitive list of wear and tear items needing replaced all came to the expensive sum of £400, luckily the main fault that she went in for in the first place was covered under warranty otherwise it be much more, the res of the faults needing replaced were found whilst it was being serviced.
I guess if you buy an expensive car you need to know that it comes wit expensive parts and labour, i still love my space star and dont intend selling, the car on the outside is near perfect and only done 20k+ miles, not bad for a 2004.
love my car to bits so glad i got it.
 |
 |
|
12
|
Andy52 |
444 |
16th March 2009 - 10:45 AM Last post by: yanto |
I posted a question a few days ago and got no replies. I sorted the problem by myself, thanks. I then looked back and there have been questions posted years ago and still no replies. I hope they got their problems fixed and did not wait too long for some help n this forum. Is it that those who frequent the forun do not know the answer or that they can't be bothered?
As I said in my post, I previously owned a Toyota Hilux Surf. The forum I used to help me was fantastic. On more than one occasion I had taken something apart and come across an unexpected problem. I would come inside, put my query on the board and have a coffee. The answer was usually posted before I finished the first cup.
I won't be using this one again as I cannot wait up to 4 years for a reply.
Andy
 |
|
|
1
|
Andy52 |
200 |
13th March 2009 - 01:44 AM Last post by: NWM_Tech |
New member. Found the article the other day and have now lost it. The driving range has stuck at zero and I have tried to reset it by disconnecting the battery. Left it for an hour but when I reconnect, all the readings go back to the same as they were before. How long do I need to leave the battery disconnected?
I'm well impressed with my 2004 Space Star 1.9 DiD. Had a Toyota Hilux Surf before this which did about 25 mpg. Now I'm averaging about 48.
Andy
 |
|
|
3
|
andreaot |
1,985 |
22nd February 2009 - 06:07 AM Last post by: yanto |
hello, i have a 1999/v space star which keeps cutting out at low revs,fine when on a run and worse when engine warm, been seen by a mechanic who can find no problem, can anybody help???
 |
 |
|
1
|
Mogens |
660 |
11th November 2008 - 08:53 AM Last post by: loz |
Hello!
I'm the proud owner of a Space Star 1.3 from 2002.
Unfortunately I have the bad habit of leaving things on the roof, which made me lose both a mobile phone and a bunch of keys.
Now I'm missing my remote for the central locking system - but here in DK, it's extremely expensive to buy a new one.
Does anyone know what the price would be in the UK orin other countries in the EU?
I also wonder, whether any non-original controls are available?
Kind regards from Mogens, Denmark
 |
|
|
4
|
steve1057 |
462 |
8th November 2008 - 07:27 AM Last post by: trustgain |
hi ive a space star petrol 1.3
and both passenger and driver electric windows go down but wont go back up
if they fully go down to the bottom they both try to go up and jerk as if they are trying to come up
ive checked the switches and they are ok and also the wireing
ive had both units out from the car and test them they seem ok but when put back in they do the same thing
if i put a cable tie round the top steel actuating wire and pull it side ways whilst selecting up i can get the passenger side to work everytime from bottom position
its as if i take the slack out of the wire it works ok
however tried this on the drivers side and it didnt work if i dab the drivers side switch then actuate the switch as normal then i can get it to come up
ive noticed the motor has a coil of steel wire which is wound around a pully and this leaves the motor on either side and there is a spring plunger type device on each exit through which the wire goes and only one is pulled in depending on its direction in the fault condition one will go in then straight back out again
its as if its sensing an obstuction
its doing my head in as ive had a mechanic look at it and he cant see why either
are there switches in the motor unit or is it a case of the window channels gone stiff and offering too much resistance to the motor ive tried lubricating the channels with silicone spray but its made no differance
i didnt want to undo the motor unit and have springs fly out in all directions
any help appreciated please
as im frightened to use the windows when im out and about
NEW UPDATE BELOW PLEASE READ
 |
 |
|
0
|
pennistonjp |
564 |
22nd October 2008 - 03:17 PM Last post by: pennistonjp |
I found the following in another forum on this site and they definitely work for the type of fob described which my Spacestar has.
central locking remotes(not alarm remotes) can be reprogrammed very easily.
press and hold both buttons on the remote until the light stays on permanently(usually about 10seconds).
this conditions the remotes for reprogramming.
you have to do all remotes when you do this.
next turn the key on to the run position.
then press the lock button on one remote and it should flash and go out.
then do the other remote.this should resynch the remote.
turn the key off and try.
if you happen to take too long between conditioning the remotes and reprogramming the light may go out on the remote.
simply press either remote button and the light should come back on solid again.
This will occassionaly work on the alarm fobs as well but most times you need the alarm code and the bullet plug for these.
hope this helps you all
AS AN EXTRA FOOTNOTE THIS ONLY IS FOR THE COBRA KEYLESS ENTRY REMOTE WHICH CAN
BE IDENTIFIED EASILY AS A ROUND BLACK REMOTE WITH A LARGE AND SMALL GREY BUTTON.
IT WILL ALSO HAVE A RUBBER TAIL IN WHICH TO ATTACH IT TO YOUR KEYCHAIN.
 |
|
|
2
|
La7oea |
2,533 |
21st October 2008 - 04:38 PM Last post by: pennistonjp |
Due to changing battery, the keyless entry does not function anymore.
Came across a description on how to re-register the handheld unit, but it required a diagnostic unit. But what it really said..... using the diagnostic unit, pin 1 would be leaded to ground and hence the keyless ecu would go into programming mode.
Well equipped (toolbox and a cup of coffe) I opened the panel to acess the dianostic connector, and horror strucked me......
Not one connector.....but two. As some of you know they are positioned side by side.
My question is : where is the bloomin Pin 1 ? left or right connector(lefthand steering)
 |
|
|
0
|
helenspacestar |
452 |
10th October 2008 - 09:06 AM Last post by: helenspacestar |
Hi,
Does anyone know of anywhere in norfolk where i can get hold of spare parts for my 2001 space star?
It's driving me mad all i need is the front fog blank bit and no matter how much i search on the internet i can't find any surely someone somewhere local wil have them!!!
Also in need of a good bodyshop and good also needs to be cheap around the kings lynn area in norfolk.
SOme evil

decided to key my car from front to back and has left loads of car dents in my door!!!
i know who it is but got no evidence which infuriates me!!!!
Anyway cheers for all your help.
Hell
 |
|
|
0
|
Mogens |
289 |
28th September 2008 - 06:01 PM Last post by: Mogens |
Hope this Forum can help me.
I want to listen to to DAB radio in my Space St., but I also want to maintain all the information in the display. Is this possible - or do I have to choose between the two?
Mogens
 |
|
|
0
|
Mogens |
219 |
28th September 2008 - 05:55 PM Last post by: Mogens |
I just wonder:
Does the new design rear lights from 2003 and on fit the the older cars?
Mogens
 |
|
|
1
|
nobleian |
1,049 |
17th September 2008 - 03:45 PM Last post by: platforman |
Hi there
I have had to purchase a new Display unit for my 1999 1.3 Space Star.
Does anyone know how easy it is to replace and where I can get information on how to do it?
Many thanks
Ian
 |
 |
|
3
|
Nev |
1,969 |
8th September 2008 - 03:17 PM Last post by: Dutchman_RP |
I own an '02 1.6 petrol Spacestar and appear only to get around 33 mph where the add's say 39 mph.
I've owned this vehicle for around 3 months and no matter how light I'm on the accelerator i'm still only getting between 32 - 33mph.
Are the add's wrong or is there something amiss here?
Otherwise I've been pleased with the whole car
Nev
 |
|
|
0
|
MacSpaceStar |
281 |
8th September 2008 - 11:42 AM Last post by: MacSpaceStar |
Hello all, another newbie here.
I have a 2005 plate Space Star DiD Equippe.
Last weekend while out for a drive the EMS light came on for a bit and then I got a serious loss of power in all gears.
I took it to my local garage and they diagnosed - after running diagnostic software - that problem was caused by the turbo pipe coming off. They reattached the turbo pipe and I managed two short runs in town and one short motorway drive before I got the same problems again.
On a visit to the garage today it seems that the turbo pipe had come off again despite them reattaching the pipe with a new jubilee clip. The garage suggested that it could be a problem with the wastegate, or the sensors related to the opening/closing of the wastegate.
Anyone experienced similar problems ?.
Would a Mitsu dealer be able to run more detailed diagnostic testing than the local garage to see if the problem is to do with the wastegate or the Mass Air Flow sensor ?.
Any advice would be gratefully received.
 |
|
|
2
|
loz |
994 |
18th August 2008 - 07:05 AM Last post by: loz |
I have now fitted an after market keyless entry system to my 2003 Spacestar, and my experience may or may not help others;
The Spacestar, post 2002 Model year, only had central locking from the driver's door keylock, previous models having it from both front doors. This can be a hassle, and a keyless system is obviously a great help. The dealer solution is based on charging around £180 for a Cobra system, which is reliable, but I think the fobs are terrible. A Cobra system bought separately is about £70, sometimes less.
You DO NOT need another actuator/ motor to get the Spacestar system to work, ignore the websites that say this is the case. The Spacestar works from a door lock ECU, that requires a switch signal to earth. If it sees this, it locks or unlocks all the doors, simple as that.
All the aftermarket systems seem to use two miniature relays as their basis, one to lock, one to unlock. The system is based on two sets of three wires from these relays, using the common and normally open connections. one goes to earth, and the other goes to the appropriate wire on the back of the ECU connector, and the remaining normally closed wire is cut off. The unit requires a permanent live feed and an earth. There are usually other wires from the unit for indicator lamps, which is optional, and also global closing / boot release, which are not required / possible for the Spacestar.
There are a few kits out there including Cobra, Falcon Phaser and Rightclick. I have tried a Rightclick kit, and I think you get a reasonable unit, but with a slightly cheap fob. Doing this again, I would go for the Falcon kit for a better fob. Instructions for many kits seem minimal, and as I said before, they recommend another motor for driver's only door sytems, and that just isn't needed.
If you want any particular details, please ask via this forum.
|
|
|