I have a prob with the drivers window. some piece fell off and is chilling inside the door. i need a pic of how the window is mounted or a diagram and the one in my chilton book blows.....please if you have the door panel off and the speaker out take a pic for me

I have the window rattle problem right now. Will probably take care of it this weekend if it does not rain. Ill take some pics for you....

If you cant wait, try this:

http://www.dsmtuners.com/forums/showthread.php?t=57412

Ok, I hope these pictures help.

Here is the door panel removed:
(IMG:http://img171.imageshack.us/img171/6970/dsc01346cx9.th.jpg)

Here is the view from the speaker hole looking towards the front end of the car:
(IMG:http://img65.imageshack.us/img65/7678/dsc01350wa2.th.jpg)
The brass bracket is what causes all the racket!!!

To remove the bracket, just use a 10mm socket to remove the one nut that holds it in place.

(IMG:http://img167.imageshack.us/img167/7546/dsc01353ey8.th.jpg)

I think the bracket has a white plastic thingy that cushions the guide against the bracket, but mine dissappeared from a previous repair??? (I had to bust a McGyver and use some cardboard strips and good old duct tape to cushion the noise.
Adjust this plasting thing (if you have it) so that there is no room for the window to move when you push out on it.

***note*** be carefull when removing the window controls. The holes where the mounting screws go tend to break very easlily. If you happen to break any here is an easy fix. Go to an auto parts store and buy some of this stuff ( cant remember the name right now) Its like super duper crazy glue:
(IMG:http://img248.imageshack.us/img248/3733/dsc01357wf7.th.jpg)
mix the solution together and apply it to where the screws go. Put the screws back on and let sit for a few minutes (make sure to apply pressure so that is sets at the right height. And your good):
(IMG:http://img258.imageshack.us/img258/8188/dsc01359qv4.th.jpg)

hey that glue, could possibly be JB Weld.