Hi I have replaced my my Mitsi radio with an after market radio and kept my LED DISPLAY for mileage computer. I f you want to know let me know

Hi!
I really want to know what can I do with that LED display - please give some more info about that display
Thanks a lot!

Hi what I have done is to remove the tray above the cigarette tray and screw in the the heater controls. Remove the standard radio and after removing the tray above the **** tray and screwing in the heater controls you are left with a double din space. You have to do a little mod with a stanley knife but there are holes to screw in the heater controls. I then removed the radio harness from a scrap car. You need this to power your Mitsi radio. Put the Mitsi radio with connector for the display plugged in and the wiring harness with just the 2 power leads and earth. then put in your after market radio into the car harness with all the speaker wires etc. When you switch on you will find you keep you mileage comp etc. Basically you have 2 radios but it is the only way to keep your LED display. Let me know if you need any more info