Can someone provide me with detailed instructions on how to remove the headlamp housing?

Also, how to adjust the beam pattern?

thx

Here is a link to it (adjusting the beam patter). It is on another site though, with a diagram:



http://4b11lancers.com/index.php?topic=111.msg736#msg736

thanks, great post.

Definitely. My lamps needed to be adjusted when I realized my HIDs provided just as much ground coverage as my stock halogens. They wouldn't even project onto a wall that was 15 feet away!

1 10mm wrench and 5 minutes later, I had more road illumination than you could shake a stick at! Just avoid pointing them too high up as they may blind other drivers.

aww but thats the fun part

LOL

Aaaahhhh I'm BLIND!

Yeah I am going to have to do this to mine as well. I needs to gets higher!

Just make sure you are adjusting them to a feasible height. Last person you'd want to blind is a cop. :beer:

they wont see your license plate in the front or know wtf is going on (like alien abduction) and then you can pass them and try to get free lol

You guys are soo :offtopic: it's not even funny. Well maybe alittle bit.

technically lol we aren't its just cop being blinded by headlamp adjustments so in a way im on topic, but i have a feeling posting this will make it get :offtopic: and ppl will get mad.

Alright....I posted the link to the headlight adjustment.....I even printed it up & tried to match it with what's under the hood to make the adjustments...but I can't find the screw head to adjust it!

My lights are still too low from the factory & I really have to adjust them higher.



Help help!! :P

lol, it's not a screw. It's a 10mm nut. Look for a silver washer. The left lamp is easy to adjust, but the right one is a pain. I had to unmount my coolant resevoir to do it, but it was much easier than I thought. I did it using a 10mm socket wrench with extension.

***For those of you with Injen's CAI, the left will be a royal pain in the arse to adjust.***

lol, it's not a screw. It's a 10mm nut. Look for a silver washer... or better yet...



Attached thumbnail(s)

+1000 for you for coming through AGAIN!

Man.....no wonder why LOL! Next time I'm holding a pair of scissors....just ask me out loud....who's special... & then watch what I do :laughing:

This is another reason why i am glad i found this site is their anything you people dont know :) :liebe011:

I didn't need to remove anything. I used a small extension & it was done in no time flat. :liebe011:

Yeah it was simple, just went to a building, and adjusted them up more and made sure they were both level. Now it look like i'm running with 12000K high beams....so much fun! :banana:

Alot of stuff under the hood is held on by a 10mm nut or bolt.

Yes :offtopic: