i need to know where i can get oil feed lines for a t3/t4. would it be cheaper if i just went to like home depot and built my own or is there site with a cheap kit?

Build your own, Summit racing has all the stuff you need to do it correctly.

Or go to NAPA and have them put the compression fittings on the black stainless steel braided hose. This stuff will last you 10-20 years. They use it on dump truck hydraulic systems.

this may be noob question but i dont know all that it entails for a feed/drain kit. any lists somewhere?

ss line. AN fittings.

tell us the EXACT model of the turbo you have and I will find you every fitting and line you need :thumbsup:

Examples:
Garrett t3 50 trim
Garrett GT35R
Mitsubishi TD05 16g

is it for your 420a car or for a 4g63 car?

I'm gonna take you up on this as well. (Much easier then Lugging two turbos to the store and walking around test fitting each AN fitting.

Mitsubishi TD04 9B, need the oil and coolant stuff. and 6g72


Ok enough threadjacking for me.

performance oil feed kit

oil feed and return line kit

coolant line kit

oem coolant hoses

oem turbo return line mounting bolts

oem turbo mounting bolts


All together with feed lines, return lines, rear feed adapter, bolts, crush washers and gaskets
full oem turbo oil line kit



root site

Oh I thought you were gonna tell me what size hole I had in my turbo and what size thread it was.. :lol: Guess off to the supply store I go with my turbos. haha.

its for my 420a

and its a T3/T4 A/R .50 (xspower)

um, I don't know what size "hole" you have. :laughing: couldnt let that one get past, haha I will get that for you.

I will have those for you also :thumbsup:

pwee to the rescue again. thanks man

bueshy here is the cheapest kits I could find that still had good components
Ebay

Eric, As far as I've ever found there are only a few bolts that mitsu ever used on their turbos for coolant and oil feed/drains. Length is, for the most part, pretty standard.

M12X1.5 or M12X1.25 or M12X1.75 Oil feed banjo bolts

M14X1.5 or M14X1.25 or M14X1.75 Coolant banjo bolts

If you have a bolt thread gauge find some random bolts laying around that have those dimensions and try to thread them in. if they work, thats the banjo you need. However, there is an extended oil feed banjo bolt that is necessary for the 3000gt.

Long banjo bolt

I don't know the length of it.

thanks pwee a bunch. i wasnt expecting the price tho. just from me looking on other forums and me piecing togther a kit i thought it would be cheaper. but if this will last and not break and screw me up later im will ing to do it. but thanks again dude

bought the kit. man im getting excited all the pieces are coming together and the build should start in about a month or two :D