i just got done fixing a wireing harness of i think 38 wires that was pulled from a blowout in the pass side wheel well, wouldent have pulled them all out, i think 3 where pulled at first but a florida highway patrol officer Cough*A S S H O L E* made me drive it forawrd on the rim and pull out just about every one, and the ones that wernt were broken inside the rubber wire coating... That was a night mare... still gotta finde where 2 wires run... if any 1 knows where the blue and black wires controlling the antilock brake system on the pass side lead into could you let me no? its still connedted at the brake but it cut off where its mounted in the top side of the inner fender

The two wires from the RH brake ABS sensor should run to the number 4 & 5 terminal on the ABS ECU, they should be a Black wire with a red strip to the #4 terminal, and a White wire with a red stripe to the #5 terminal. There are no slices in these wire.

actually i mean the black and blue wire running directly from the brake