I need to take the front bumper off my '99 RS to install a body kit, however, I can't fiigure out where all the bolts are! Anyone know how, or know a link for instructions, please let me know!

-Fatty_2gen

buy a chiltons :thumbsup:

WORD!!!! Chilton's is awesome, saved me tons of time and money!!! plus you'll be able to use it for any other problems or repairs you have to do in the future!!

there are screws in the grill of the front bumper, don't remember how many tho like 5 or 6

also check the insides of your wheel wells. they may have screws in them, and if your replacing the quarter pannel you'll need that. they're usually pretty easy to find, if you look hard enough you shouldn't have too much trouble. :D

yea last time i took off my front bumper i was also replacing the front right panel and i had to go through the wheel wells to get them both off i cant remember if they had bolts to hold them together but i think they do

what color is your stock front bumper? Mine has a crack, and I need a new one.

like a metalic black but it had a huge crack in it from the person who i bought it from.. i guess they went onto 1 too many parking stops.. lol

there should be like 4 or 5 bolts under the hood, at the top of the bumper. take off those and the retainer strip. then take off the bumper bolts connected on the bottom bracket(should be 5 or 6). if your bumpers is cracked you might not have a bracket down there.(i dont) then there are three plastic snaps and two bolts (i think) in each wheel well. then (your not done yet!!!) there are i believe 1 or 2 bolts under each headlight. then your bumber should just "pop" off.

your body kit should not have that many bolts to put it on, but i would make sure before you slap it on!!! check to see before you put it on to make sure you dont have to modify any of the existing brackets.