Hello everybody, I'm new to this forum. I have a 4D56 diesel engine from a 1992 Mitsubishi L300 2WD Van. I'm looking for a wiring diagram or any information that illustrates how to wire connect the corresponding glow control unit K8T75071 to this 4D56 engine. The glow plug control unit connector is a 9 pin socket and has 8 wires connected to the pins (one pin is empty). I need to know which wire(s) of this timing control unit connects to what i.e which wire(s) to the coolant temperature sensor, the fuel cut solenoid valve, glow plug relay, altenator charging L wire, preheat indicator lamp ect ect. The connector socket wire colors are as follows;
1 3 X 6 8
2 4 5 7 9

Pin to Wire colors
PIN 1 = black-white
PIN 2 = green-black
PIN 3 = empty
PIN 4 = black-yellow
PIN 5 = black
PIN 6 = brown
PIN 7 = brown-white
PIN 8 = yellow
PIN 9 = yellow-green

Any help on this would be greatly appreciated. Thank you very much in advance.

Hi there

Does this help? should be able to work it out from the wire colours... (IMG:style_emoticons/default/thumbsup.gif)