Figured I'd throw a post on here and see if I can get any help. The other night my mighty max's dash lights went out, and down the road I realized I had no taillights on my trailer or truck. I pull over and check the lights and everything but running lights were working. I check the fuses under the dash and the 10 amp tail light fuse was blown. I had a few spare 10's, so I put one in, turned the lights on and watched it pop. I disconnected the trailer light plug, tried again, and it popped. I disconnected the only wire I've ever wired into the cab which was one single wire from the battery to a tiny switch, and had the same result. Any ideas? thanks.