Mitsubishi Forums banner
1 - 1 of 1 Posts

30 Posts
There is a spare connector with a signal from the brake relay for use by a trailer.
It is located here:
You need to remove the tie-down hooks to the left of the spare tire. This will allow removal of the panel that hides the connector. The plastic in the middle of the hook comes out by popping it out with a flat screwdriver. That will reveal a 10mm bolt. I took a screenshot of the plug diagram from my manual- sorry I couldn't save it in a better format. The wire color codes are:
BR = Brown
G = Green
G-O = Green/Orange
Hopefully this is what you were looking for- I spent some time finding this myself.



1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.