Mitsubishi Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey there.
I have a 2010 1.8lt diesel asx. It’s stalled the fault is a high pressure fuel system.
I’ve had both pumps, the injectors and the rail pressure tested all are in working order. The fuel is not spraying out of the injectors. The mechanic put in a slightly different injector and it sprayed from all 4 ports when connected to each. But the injectors have been tested on the bench and they work. Any ideas?
 

·
Administrator
2021 MR Triton
Joined
·
665 Posts
Is the crankshaft position sensor ok? Without this signal the injectors wont know when to fire. So all the injectors and pipes and supply might be ok, but if they dont know what to do and when?

What was your initial fault with the vehicle?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top