Ps Sorry my truck is a L200 4D56T 1999
Model

 

Welcome.
Are you from Cyprus?
Is your truck originally sold in that market?
Here is a reference page:

https://partsouq.com/en/catalog/genuine/unit?c=MMC202403&ssd=%24%2AKwEfKzpUX3ZHSGxaSkc1CUdTc3RqGxQZGAolFl5Ya39jZ2VmIzQYclxYXG17YnM1KCIfFmcYHRxVSjQBRFkOEQh3DgcLF1hcGVFVX21XCV1WQER3DgcITkIJE1Y5UB0faRpsGm8LWFgFRA4RHgEOXgtOWFMZAR0bHQ4HCx1YXA8dHh4CHR4dK0xXHR96EnlrHn1WBxhbSUNqVg5IC05aRG4aGxlvHGofMFhKDQ5GCBcMCWJDTjIPAAsITkAJE1RYPGNobWYbDlYAAAAAci5Wvg%3D%3D%24&vid=0&cid=4&uid=135220&q=

It shows the Upside Down?? relay "J" as:

FLASHER UNIT HAZARD & TURN SIGNAL LAMP

82558

01

MA066500-4170

MA066500-4170

ALL

The relay "K" as:

RELAY,SPECIAL LAMP

82766

01

156700-0110

156700-0110

ALL

But I think it could be the Starter Motor.

I cant find the other part # on my reference sheet.

What electrical troubles are you having?

Pull each relay to find what function stops working.
That will tell you the function.

 

Yes, I am in Cyprus.
The Truckid originally from and registered here.
Thank you for the reference but I still can't seem to find going off the numbers that match on my relays.

 

Thank you for your reply.
Many ask questions, I spend time trying to help them, then they disappear never to be seen again.
Are you able to upload a photo' of the build/data plate, which will have all of the important identifying numbers on it.
There are SOOOOOO many variants, so more information would be very helpful.
A photo' of the truck would also help including the model badges, registration plate identifiers excluded.

 

Yes Is the build data plate A silver plate at the front under the bonnet

 

Yes, that is it.
In some markets there are more than one.

Like this(click to enlarge):



If there are two, please upload both.
Also, a "wider" photo' of the fuse box - not zoomed so close.

 

There's only the one plate under the bonnet

 

Thanks.
That gives me a bit more to work on.
I will try my best.

 

Thank you so kindly 😁

 

Could you please tell me a little more?
Single cab/dual cab?
Auto/Manual?
Trim level(that is why I asked for a photo' ?

A photo' of the truck would also help including the model badges, registration plate identifiers excluded.

The more information I have the better, as there are many variants in the overall European market.

 

It's a double cab
RHD
Manual 5 gears
Red/silver
Grayish/ Blue trim
Just L200 on the Doors badges
And it's a 2.5 Turbo registered 1999 here in Cyprus

 

Just to put you in the picture, here is the page with all the different models I have to choose between:

https://partsouq.com/en/catalog/genuine/pick?c=Mitsubishi&ssd=%24*KwHFn-CPAAAAACp3S4I%3D%24&model=Europe&f_vehicle-name=L200&f_classification=&f_year=1999

 

This is the page I have decided is the best "fit".

https://partsouq.com/en/catalog/genuine/vehicle?c=MMC202403&ssd=%24%2AKwHp3cyktJ-kiq2PjI7x57GlhYKc7eLv7vzT4KiunYmVkZOQ1cLuhKquqpuNlIXD3tTp4JHu6-qjqefk0KD4vv7h-v-ctLyjmeqc6p_48f-g4bLh-v-X7O6J_a6ssri2_-b7-JeazMjWiez_oQAAAAC1fFL9%24&vid=0&q=

 

I am sorry is there anything else I can give to possibly narrow it down

 

2wd or 4wd?

 

4WD
YES 4X4

 

In a roundabout way I have found your fuse box(Part # MR 228361):

Mercado Livre

,but I cant get a detailed shot of it on a reference page

 

This is the closest I can get to the fuse box:

https://partsouq.com/en/catalog/genuine/unit?c=MMC202403&ssd=%24%2AKwGIvK3F1f7F68zu7e-QhtDE5OP9jIOOj52ygcnP_Oj08PLxtKOP5cvPy_rs9eSiv7WIgfCPiovC3aOW086Zhp_gmZCcgM_LjsbCyPrAnsrB19PgmZCf2dWehMGux4qI_o37jficz8-S05mGiZaZyZzZz8SOlouMipmQnIrPy5iKiYmViomKvNrAiv-MjYuMiOrBkI_M3tT9wZnfnNnN0_mNjI74i_2Ip8_dmpnRn4CbnvXU2aWYl5yf2deehMPPu__1-PvojZ7DAAAAAPKimgI%3D%24&vid=0&cid=4&uid=135231&q=

It does not show mw the relays above it.

Again, what problems are you having?

NOTE: I AM NOT AN AUTO ELECTRICIAN OR MECHANIC.

 

No check engine light on ignition and no oil light . The oil one will probably be the sensor it's the check engine light that's bothering me .And when you hook up a scanner it didn't read or even power on It's powers on now with a earth from pin 4&5 Earthed the chassis but it's still showing linking Error .
Still whys the check engine light disappeared it's not the bulbs in the clocks i have checked them.

 

That is beyond me I am sorry.

But I think I might have found your model's workshop manual(supplement only - not the total):

https://jdmfsm.info/Auto//Japan/Mitsubishi/L200/Manuals/1997-2002/1997-2002%20Workshop%20Manual/00/00%20GENERAL.pdf

 

EDIT:

Now I have found the complete manual 1700 pages long

MITSUBISHI MOTORS L200 1996 AUTOMOBILE WORKSHOP MANUAL

View and Download Mitsubishi MOTORS L200 1996 workshop manual online. L200 1996 automobile pdf manual download.

www.manualslib.com

 

Thank you so much That will help me

 

😮 1700 pages 😂 I must say you have been extremely helpful For you so much for all your time and help Especially at weekend.
Thank you once again.

 

The Chassis Electrical Section is Section # 54.

Page 1512 and after

 

Did you do as I suggested?
Pull each relay out individually to try to find out what components stopped working?
That is quite easy to do, without risk of breaking anything.
That will not solve your "Check Engine Light" situation, but will answer your original question.
I don't believe unknown relays and a non-functioning CEL are related.