Mitsubishi Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
most of u guys pobably have legit evos. but does anyone have experience in building one from a lancer or mirage. preferably a evo v. iv and vi works too. if u do mind leavin links to ur project site or technical info during the process
thanks alot :liebe011: :beer:
 

·
Registered
Joined
·
3 Posts
for a Mirage to Evo VI converson you will need a front & rear cut of the Evo VI and a 97-02 mirage chassi, every thing will swap over (bonnet, doors and such) the only problem is RHD as apposed to LHD and FWD to 4WD.

Easy RHD is to bare the midsection on the Mirage chassi and do a layover bolt for bolt from the Evo, this will take cutting, grinding, welding, filling, and painting. now you will have steering on the RHS as well as all nessicary mounting locations for evo engine swap and dash excessories.

FWD-4WD you will notice the evo has a raised boot to accomidate to the rear differential, and extra brackets for 4W controle arms and what have you, The mirage chassi has a deeper boot, and no RD arms. here you will need to visavis the rear portions similar to the front
 

·
Registered
Joined
·
3 Posts
nother note; if you dont want to do the 4WD the mirage case will not work but i cant remember which gearbox will fit so you probably need to lock the evos gear box
 

·
Registered
Joined
·
11 Posts
Discussion Starter #4
:liebe011: sorry but i havent logged in in a while
the original car was already RHD, here in jamaica we use RHD cars.
But ive decided to try to get a lancer gsr 4g93T or jus an awd lancer and do an evo 3 conversion instead

thanks for the help tho :liebe011:
 
1 - 4 of 4 Posts
Top