Mitsubishi Forums banner

1 - 15 of 15 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
This is my first of many posts...I hope

Does anyone know where to get an OEM fog light kit for a 2006 Ende...all I can find is for 04-05. I have not contacted the dealer I would guess he could get them.
 

·
Registered
Joined
·
7 Posts
You're correct about the dealer as a source. They quoted me $125 for the kit, which can be installed by the owner (should you want the dealer to install it, labor is not included in the price). Were you able to find a lower price on the 04-05 light kit?
 

·
Registered
Joined
·
13 Posts
Discussion Starter #3
This site has the fog light kit that will fit the 04 and I assume the 05 as well
Mitsu Parts I do know that it would be a waste for the dealer to install since it is pretty much just a plug it in a go. If you pull the plastics out where your lights go you will see that they are already wired up and ready to accept lights. Thanks for the help.

Tony
 

·
Registered
Joined
·
7 Posts
I wouldn't try one that just fits '04 because that year had a square hole and the newer endeavors have a smaller round hole. It might fit, but is it worth taking a chance for $10 less? (Thanks for the link, though...)
 

·
Registered
Joined
·
42 Posts
I bought them from the dealer. They came with the switch and all. Everything snapped into place very easily. It took me 15 minutes from start to finish.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #6
My Dealer in town told me that they can't get them yet...This would also be the reason way I didn't buy Ende from them. They seem to be alittle (or alot) slow.

I will try to call them again.
 

·
Registered
Joined
·
10 Posts
Yeah, I have to agree not to get the 2004 foglights if you have a 2006 Endeavor. When I went to a nearby after market store to pick up PIAA bulbs to replace the stock bulbs on my 2006 Endeavor. The dude @ the store gave me H1 bulbs because that's what the PIAA specs gave out. It was not until the Mitsu dealership went to install the bulbs I was then told that the bulbs are different. Apparently, the 2004 & 2005 Endeavor foglights uses H1's. But the 2006 & I'm assuming the 2007 uses H11 bulbs. So I'm pretty sure the fitment between the 04 & 05 is different from the 06+.
 

·
Registered
Joined
·
8 Posts
Originally posted by ynot0002@Dec 29 2006, 12:27 PM
This site has the fog light kit that will fit the 04 and I assume the 05 as well
Mitsu PartsÂ* I do know that it would be a waste for the dealer to install since it is pretty much just a plug it in a go.Â* If you pull the plastics out where your lights go you will see that they are already wired up and ready to accept lights.Â* Thanks for the help.

Tony
[snapback]80604[/snapback]​
Good Evening, Tony,

Are you saying that the recepticle for the fog light kit is already there and you simply remove the extant plastic grating, plug in this kit, run some wires and voila! it is done?

That sounds easy as pie!

-Dreadnought
 

·
Registered
Joined
·
13 Posts
Discussion Starter #9
This maybe a late respond...but yes the fog lights are just a plug everything in and go. I did this for my 06 and it took about 5-10 min.

Easy to do and makes a very nice improvment. Plug lights in....plug relay in...plug switch in...and drive.
 

·
Registered
Joined
·
42 Posts
I bought them for my 06 from the dealer and they took me 15 minutes to install. They come with switch and all.
 

·
Registered
Joined
·
14 Posts
Originally posted by ynot0002@Apr 28 2007, 08:34 AM
This maybe a late respond...but yes the fog lights are just a plug everything in and go.  I did this for my 06 and it took about 5-10 min. 

Easy to do and makes a very nice improvment.  Plug lights in....plug relay in...plug switch in...and drive.
[snapback]94970[/snapback]​

Ok, stupid question...How do you pull the plastics out where the fog lights go? The switch was a piece of cake..Thx...

Jameo
 

·
Registered
Joined
·
1 Posts
Hi all, I have an 06 endeavor without the foglights.

Still saving up for the kit in the future.

A month ago, I dropped and lost the passsenger-side plastic fog light cover.

To those who have installed their 06 endy with the fog kit and won't be needing the pulled-out fog light cover,

I want to buy the passenger-side fog light cover only. Thanks...
 

·
Registered
Joined
·
5 Posts
A car dash my car from back side .In that Drivers side fog light survived but passenger side was crushed.Now I am looking for passenger side fog light..Anybody knows from where i can get this passengre side fog light only..
 
1 - 15 of 15 Posts
Top