[Leadfoot6]

file:///C:/Users/User/Desktop/Magna/Aussie%20Magna/www.aussiemagna.com/forums/archive/index6bec.html

For the rest, go here:

First Generation Magna TM - TP [Archive] - The Australian Magna Club

[Archive] Magna owners from TM 1985 - TP 1990 Discussion here.

archive.aussiemagna.net

 

[Leadfoot6]

TM/TP Error Codes video:

 

[SunriseBoy]

Howdy, I think we might have chatted previously. This looks all pretty new to me. So I hope I'm talking the right guy.
I'm still in my TP wagon. Going for 500Ks now. I can't believe I've had this over 16 years now. Paid $400 for it in Canberra, and it has never missed a beat. Go figure.
I'm chasing an original service manual for the 1990 TP Auto. EFI.

Cheers...Robin

 

[Leadfoot6]

Yes, we have chatted previously.

I just had a look through the old AMC forum archives:

file:///C:/Users/User/Desktop/Magna/Aussie%20Magna/www.aussiemagna.com/forums/showthread5729.html?t=108268

(cut & paste)

It is good to see that you have found the new forum.

Welcome.

Let me know if I can help in the future.

 

[SunriseBoy]

Thanks for that, brother. I appreciate your generosity.

Regards...Robin

 

[Leadfoot6]

Hi Robin,

I hope to see more of your contributions at the new forum.

Kind regards,

John.

 

[SunriseBoy]

Hi Robin,

I hope to see more of your contributions at the new forum.

Kind regards,

John.

Thanks for that, John. I will always be grateful for the advice you gave some years ago, about how to adjust the throttle speed thing. It worked very well!

R.

 

[Leadfoot6]

Thanks for your thanks.

It is appreciated.

 

[SunriseBoy]

Thanks for your thanks.

It is appreciated.

Hi John, I've been tearing my hair out trying to find an original Mitsub. TP Service Manual. Not the Gregory's/Hayne's knock-offs, but the one published by Mitsub.
There are TN's and TM's around the traps, but no TP service manuals.
Any ideas?

Robin

 

[Leadfoot6]

I have had a look myself.

I am not doing any better than you, and agree that what you are finding is all that is on offer at the moment.

Sorry.

 

[SunriseBoy]

I have had a look myself.

I am not doing any better than you, and agree that what you are finding is all that is on offer at the moment.

Sorry.

No dramas, John. I'm glad you couldn't find one either. I thought I was going nuts.
Anyway, I've put the feelers out, so maybe one might turn up.

 

[AQUAR]

I could not find an online PDF either. But since you are in Canberra check out the National Library Mitsubishi Magna TP series service manual | National Library of Australia. Luckily I did find an online extract of the service manual just for the bit about setting the base idle speed.
The Haynes manual is a bit lacking in detail I find.

 

[SunriseBoy]

That's very interesting because the idle speed has dropped to 600.
Will you tell me where I can get that info of that extract please?
Thanks again, John.

Robin

 

[AQUAR]

I'll see if I can find my copy. Note: IIRC the base idle speed is 900RPM and follows a procedure that needs the ISC plug disconnected.
My idle speed in drive is about 650 RPM and just stable enough with aircon going.
If everything else is set correctly (throttle position sensor etc) there is only one option and that is to fiddle with the throttle stop screw (not supposed to up it with this screw but my idle speed was to low as well - just under 600 rpm).

 

[AQUAR]

Also posted the PDF in the aussie thread by mistake.

Hope it helps.

 

[SunriseBoy]

Also posted the PDF in the aussie thread by mistake.

Hope it helps.

Thanks for that, John.
Much obliged. I will print it off and digest it.

R.