Mitsubishi Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all,

About to change the brake pads on my 2011 Lancer and I'm not sure if the rotors should be changed up as well.

I'm not getting any shaking or steering issues, but the back two look rather worn.

Any advice would be appreciated!

BACK RIGHT:

Tire Automotive tire Wood Gas Rim


BACK LEFT:

Tire Wheel Automotive tire Musical instrument Tread


FRONT LEFT:

Wood Plant Automotive tire Natural material Tints and shades


FRONT RIGHT:

Automotive tire Automotive lighting Rim Wood Automotive exterior
 

·
Super Moderator
2018 MQ Triton
Joined
·
514 Posts
The rears are certainly no good. The fronts look marginal, minimum thickness should be 24.4 mm on those. Might be worth getting them machined flat if possible
 
1 - 2 of 2 Posts
Top